Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.6 CrAccepted-AOC E 7 HIG 497 ARERA COLONY BHOPAL 16 M P | BHOPAL | BHOPAL | MADHYA PRADESH | 462016 | ₹4.6 Cr | L1 | Accepted-AOC Accepted |
| 2 | L2₹4.7 CrRejected-AOC 48 GF SECTOR 1 HUDA NARNAUL MAHENDRAGARH HARYANA 123001 | NARNAUL | MAHENDRAGARH | HARYANA | 123001 | ₹4.7 Cr | L2 | Rejected-AOC Rejected |
| 3 | L3₹4.7 CrRejected-AOC 1849 JUGRAJPUR SACHENDI KANPUR KANPUR NAGAR UTTAR PRADESH 208023 UDYAM UP 43 0012110 | KANPUR NAGAR | UTTAR PRADESH | 208023 | ₹4.7 Cr | L3 | Rejected-AOC Rejected |
| 4 | L4₹4.9 CrRejected-AOC VPO JAGRAM BASS TEHSIL BADHRA DISTT CH DADRI 127308 | JAGRAM BASS | CHARKHI DADRI | HARYANA | 127308 | ₹4.9 Cr | L4 | Rejected-AOC Rejected |
| 5 | L5₹5.5 CrRejected-AOC NOT AVAILABLE | ₹5.5 Cr | L5 | Rejected-AOC Rejected |
| Sl No | Description | Qty | Unit | THE JAGRAM BASS COOP L/C SOCIETY LTD. L5 | M/S LAXMI CONSTRUCTION CO. L3 | M/S SHREE BALAJI BUILDERS L6 | OM PARKASH CONT L7 | PUNJAB IRRIGATION AND FARM SOLUTIONS L1 | M/s Balaji Construction Co. L4 | Shree Salasar Associates L2 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.01 | Supply erection and commissioning of self priming pump set (vacuum pump) of approved make and ISI mark and satisfaction of Engineer in charge | 1 | Nos. | 60,335.82 ₹60,335.83 | 60,000 ₹60,000 | 70,301.82 ₹70,301.83 | 70,700 ₹70,700 | 97,500 ₹97,500 | 80,000 ₹80,000 | 85,000 ₹85,000 |
| 1.02 | LED based solar lighting system including Supply,installation, and commissioning with 5 years warranty, GST,for destination etc. (without rms) with technical specification SPV module of 75 Wp, 12.8 volt 30 Ah Lithium Ferro Phosphate battery , 12 Watt white LED Luminaire and Pole of 5 meter above ground level with dusk to dawn operation (first4 hours full light (min. 24 lux), rest of the time at lower light (50% min. 12 lux) level) and 3 days or minimum 36 operating hours autonomy. | 2 | Each | 11,987.25 ₹23,974.50 | 10,000 ₹20,000 | 13,967.25 ₹27,934.50 | 16,016 ₹32,032 | 14,300 ₹28,600 | 15,000 ₹30,000 | 18,000 ₹36,000 |
| 1.03 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISI marked HDPE pipe of 225 mm outer dia of PE-80 grade and PN-4 for water supply as per IS 4984-2016 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends , tees required during laying of pipe line along required alignment. | 200 | Metre | 923.38 ₹1.8 L | 1,271 ₹2.5 L | 1,075.9 ₹2.2 L | 1,400 ₹2.8 L | 1,340 ₹2.7 L | 1,000 ₹2 L | 820 ₹1.6 L |
| 1.04 | Supply erection testing and commissioning of 300mm i/d Electronic FLOW METER (KRONE Make) with digital display including all other required accessories complete complete in respect to the satisfaction of EngineerIn-Charge. | 1 | Each | 60,335.82 ₹60,335.83 | 1,00,000 ₹1 L | 70,301.82 ₹70,301.83 | 99,999 ₹99,999 | 1,62,500 ₹1.6 L | 1,00,000 ₹1 L | 1,11,000 ₹1.1 L |
| 1.05 | NS Item -Supplying, laying, jointing, testing and commissioning of 300 mm dia 8 mm thick, ERW MS pipe including cost of ms flanges ,Nut Bolt, Rubber Zen and duly painted with anti corrosive paint complete in all respect or as per directed by the Engineer-in-charge | 25 | Per Metre | 5,919.52 ₹1.5 L | 8,148 ₹2.0 L | 6,897.28 ₹1.7 L | 6,464 ₹1.6 L | 8,710 ₹2.2 L | 7,000 ₹1.8 L | 6,500 ₹1.6 L |
| 1.06 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISI marked HDPE pipe of 450 mm outer dia of PE-100 grade and PN-6 for water supply as per IS 4984-2016 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends , tees required during laying of pipe line along required alignment. | 5,040 | Per Metre | 4,600.2 ₹2.3 Cr | 4,600 ₹2.3 Cr | 5,360.04 ₹2.7 Cr | 5,252 ₹2.6 Cr | 6,045 ₹3.0 Cr | 4,200 ₹2.1 Cr | 4,450 ₹2.2 Cr |
| 1.07 | Supply, erection and commissioning of 4200 LPM Horizontal centrifugal pump along with solid ss shaft and ss impeller material, motor of capacity 75 Hp /Suitable Hp, phase,440/415 volt horizontal motor pumping set for canal water having head 50 mtr including necessary accessories as per indicated requirements of discharge in cusec and power capacity in HP Make : CRI, Kirlosker, Crompton Greeve, BCH, Lubi) with HEP 2.50 Cusec, 75 HP with proper foundation and third party inspection from CEIL/rites/Govt. agency. | 3 | NO. | 10,77,435.82 ₹32.3 L | 8,00,000 ₹24 L | 12,55,401.82 ₹37.7 L | 11,11,111 ₹33.3 L | 9,75,000 ₹29.3 L | 13,70,000 ₹41.1 L | 10,70,000 ₹32.1 L |
| 1.08 | Operation and Maintenance of the project for 3 years after 1 year defect Liability period but to be paid half yearly @ approx. 1% cost of the items i.e (Pump House plus Pipe line plus Electro mechanical components) | 6 | Job | 3,23,543.14 ₹19.4 L | 1,00,000 ₹6 L | 3,76,984.54 ₹22.6 L | 3,33,333 ₹20.0 L | 3,90,000 ₹23.4 L | 3,00,000 ₹18 L | 2,10,000 ₹12.6 L |
| 1.09 | S/E/C of MCC/LT Panel in control room of pump house of 400 Amp with incomer ACB 4 pole and with 03 no outgoing /MCB each of having MCCB of 200 Amp along with an additional MCB of 63 Amp for lighting load, indicators relays meter push button bus bars and with 03 no fully automatic ATS starters suitable for operation of 75 HP motors each with MCCB of 200 Amp with contactor rating as 200/180/160 amp of on/off switches in front of motor .For every motor starter with designed capacitor bank (at least 75 KVAR i.e 25 KVAR for each motor) KVAR suitable capacity with 4 step APFCR selector switch duty contactor discharge resistor digital display instrument and other allied accessories for operation of 03 No motor of capacity 75 HP (2No working and 1 No in standby) with a stand of MS channel (1feet above floor) as per site condition and degree of protection as per IP- 54 as per approved technical specification | 1 | Each | 9,80,775 ₹9.8 L | 13,50,000 ₹13.5 L | 11,42,775 ₹11.4 L | 9,99,999 ₹10.0 L | 13,00,000 ₹13 L | 11,50,000 ₹11.5 L | 11,65,000 ₹11.7 L |
| 1.10 | Supply and commissioning of MS pipe 8 mm thick, 200 mm inner dia as suction pipe complete in all respect as per satisfaction of Engineer-in-Charge. | 75 | Metre | 3,997.93 ₹3.0 L | 5,503 ₹4.1 L | 4,658.29 ₹3.5 L | 4,848 ₹3.6 L | 7,150 ₹5.4 L | 4,500 ₹3.4 L | 4,200 ₹3.1 L |
Tender Value
₹6.7 Cr
EMD Value
₹13.4 L
Closing Date
13 Feb 2026, 1:00 pmClosed
PARMOD
M/Garh W.S.Divn. Ch-Dadri
Creating water bodies in village Digrota by Madhogarh Branch by laying pressurized HDPE pipeline for releasing excess flood water of Madhogarh Branch for recharging and Irrigation purpose
2026_HRY_501072_1
2026E65D4827 9B21 48F7 8BD2 BC5008C99BA3140IRR
Open Tender
Civil Works
270 days
Charkhi Dadri
3 documents required · 3 mandatory
₹20,000
₹13.4 L
Yes
Charkhi Dadri
1 Apr 2026
6 Feb 2026
13 Feb 2026
6 Feb 2026
13 Feb 2026
6 Feb 2026
11 Feb 2026
Supply erection and commissioning of self priming pump set (vacuum pump) of approved make and ISI mark and satisfaction of Engineer in charge
LED based solar lighting system including Supply,installation, and commissioning with 5 years warranty, GST,for destination etc. (without rms) with technical specification SPV module of 75 Wp, 12.8 volt 30 Ah Lithium Ferro Phosphate battery , 12 Watt white LED Luminaire and Pole of 5 meter above ground level with dusk to dawn operation (first4 hours full light (min. 24 lux), rest of the time at lower light (50% min. 12 lux) level) and 3 days or minimum 36 operating hours autonomy.
Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISI marked HDPE pipe of 225 mm outer dia of PE-80 grade and PN-4 for water supply as per IS 4984-2016 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends , tees required during laying of pipe line along required alignment.
Supply erection testing and commissioning of 300mm i/d Electronic FLOW METER (KRONE Make) with digital display including all other required accessories complete complete in respect to the satisfaction of EngineerIn-Charge.
NS Item -Supplying, laying, jointing, testing and commissioning of 300 mm dia 8 mm thick, ERW MS pipe including cost of ms flanges ,Nut Bolt, Rubber Zen and duly painted with anti corrosive paint complete in all respect or as per directed by the Engineer-in-charge
Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISI marked HDPE pipe of 450 mm outer dia of PE-100 grade and PN-6 for water supply as per IS 4984-2016 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends , tees required during laying of pipe line along required alignment.
Supply, erection and commissioning of 4200 LPM Horizontal centrifugal pump along with solid ss shaft and ss impeller material, motor of capacity 75 Hp /Suitable Hp, phase,440/415 volt horizontal motor pumping set for canal water having head 50 mtr including necessary accessories as per indicated requirements of discharge in cusec and power capacity in HP Make : CRI, Kirlosker, Crompton Greeve, BCH, Lubi) with HEP 2.50 Cusec, 75 HP with proper foundation and third party inspection from CEIL/rites/Govt. agency.
Operation and Maintenance of the project for 3 years after 1 year defect Liability period but to be paid half yearly @ approx. 1% cost of the items i.e (Pump House plus Pipe line plus Electro mechanical components)
Supply and commissioning of MS pipe 8 mm thick, 200 mm inner dia as suction pipe complete in all respect as per satisfaction of Engineer-in-Charge.
Percentage BoQ
BoQ_Ver3.0
NIT No: 491-508 /32-A dated 06.02.2026
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
Item Description HSR Item
H.S.R. Items
Please Enable Macros to View BoQ information
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.83 MB
BOQ_579693.xls
BOQ • 0.30 MB
OT0150808.pdf
Other Document • 1.50 MB
Download all tender documents and submit your bid