Repair works of Piers, Pier caps, Viaducts, Station buildings and other structures of stations from Lajpat Nagar to Raja Nahar Singh Metro Stations of Line- 06.

Total of Schedule-A (DSR-2023 ITEMS) and Schedule-B (NDSR ITEMS)

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Total of Schedule-A (DSR-2023 items)

Total of Schedule-B (NDSR ITEMS)

APPENDIX- 3A

PROFORMA FOR STATEMENT OF MINOR DEVIATIONS

(Refer Clause C 2.2(d) and C 15.1 of ITT)

1. The following are the particulars of minor deviations from the requirements of the Tender Document:

1. The Tenderer shall indicate price reduction against each deviation in Appendix-3A of BOQ. This price is the price which the tenderer shall reduce from this tender price if deviation(s) is/are accepted by the Employer.

2. Where there is no deviation, the statement should be returned duly signed with an endorsement indicating ‘No Deviations’. In case, Performa of deviations is not submitted or submitted as blank, it will be construed that the tenderer has not proposed any deviations from tender documents.

3. It shall be noted that in case Nil/Zero/NA Price quoted by Tenderer in Appendix-3A then it shall mean that contractor has quoted same price for deviation and undeviation bid.

4. If the tenderer proposes deviations in tender documents, and/or any other terms and conditions of the tender, other than in this Appendix, it will have no effect.

Signature of authorized signatory

On behalf of Tenderer

The Bill of Quantities shall be read in conjunction with Notice Inviting Tenders, Instructions to Tenderers, General and Special Conditions of Contract, Employer's Requirement and Technical Specification and other relevant documents.

BoQ1 consists of Two schedules i.e. Schedule-A DSR 2023 ITEMS & Schedule B NDSR Item

Tenderers shall quote their offer in Indian Rupees (₹) only. Tenderers are required to quote percentage (%) Excess/Less for Schedule-A, & Schedule-B, in figures in the appropriate highlighted cells in the BoQ1 sheet.

The rates and prices to be tendered in the unit Priced Bill of Quantities are for completed and finished items of works and complete in all respect. It will be deemed to include Duties, Taxes, Octroi, Royalty etc., cost of all plants, labour, supervision, materials, transport, all temporary works, erection, maintenance, utility identification, contractor’s profit and establishment/overheads, together with preparation of design and drawings, all general risks, insurance liabilities, compliance of labour laws and obligations set out or implied in the contracts. For taxes and duties refer clause C2.4 & C2.5 of ITT & clause 21 of SCC (Civil works).

The price offer in the BOQ shall be given without considering any deviation mentioned in Appendix-3 of FOT i.e. price in the box shall be quoted as per tender conditions without any deviation.

If the tenderer fails to quote rates against any item, the tender may be treated as incomplete and non-responsive and shall be rejected.

Errors will be corrected by the employer for any arithmetical errors in computation or summation as per contract conditions.

The Financial Proposal (as per BOQ) shall be uploaded online on the website http://eprocure.gov.in/eprocure/app. The rates shall be quoted in the excel file provided in the bid documents. The tenderer shall download the excel file and quote the rates in BoQ1. After quoting their rates the excel file shall be uploaded accordingly. The rates shall not be offered/quoted elsewhere in the technical submission/ tender submission.

The actual work executed against all the BOQ as detailed in tender document would be paid on measurement basis.

The contractor may raise their “On Account” payments on monthly basis as per the status of work on the last day of the respective month as per clause 24 of SCC (Civil works).

In case of DSR item the description is given in brief and detailed description of item should be as given in DSR 2023 (Civil) published by CPWD.

DELHI METRO RAIL CORPORATION LIMITED

Contract: OCM-2118: “Repair works of Piers, Pier caps, Viaducts, Station buildings and other structures of stations from Lajpat Nagar to Raja Nahar Singh Metro Stations of Line- 06.”

SCHEDULE-A (DSR Civil 2023 ITEMS)

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.Note: - This item to be used for maintenance work judicially,necessary deduction for scaffolding in the existing item to be done.

Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.

Bars upto 12 mm diameter

Bars above 12 mm diameter

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge

50 mm average thickness

25 mm average thickness

Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge

Upto and including 12mm dia.

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.

Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make

Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of “L” shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge.

Any Other DSR 2023 items

Total of Schedule-A (DSR Civil 2023 Items)-(including of [email protected]%)

Multiplying correction factor @0.973 as per guide line issued by Tender Civil/O&M

Total of Schedule-A (DSR Civil 2023 Items)-(Excluding [email protected]%)

Total of Schedule-A (DSR Civil 2023 Items)-(Including [email protected]%)

SCHEDULE-B (NDSR ITEMS)

12 mm thickness

Total of Schedule-B (NDSR Items)

Total of Schedule-B (NDSR items)-(Excluding [email protected]%)

Total of Schedule-B (NDSR Items)-(Including [email protected]%)

Total of Schedule A (DSR Civil-2023) & Schedule-B (NDSR Items) Including GST