Loading
Loading…
Loading…
Tender Value
₹2.4 Cr
EMD Value
₹3.1 L
Closing Date
17 Sept 2026, 6:00 pm
HQ Chief Engineer Delhi Zone
HQ Chief Engineer Delhi Zone Delhi Cantt-10
SPL REPAIR FOR RE-ROUTING WATER MAINT DISTRIBUTION NETWORK FOR CERTAIN LOCATION UNDER GE U WATER SUPPLY, DELHI CANTT-10
2026_MES_785537_1
CEDZ/TOKEN-29 OF 2026
Open Tender
Civil Works
Item Rate
365 days
Delhi Cantt-10
As per NIT
8 documents required · 8 mandatory
₹2,000
GE U Water Supply
₹3.1 L
Yes
20 Aug 2026
20 Aug 2026
22 Sept 2026
20 Aug 2026
17 Sept 2026
10 Sept 2026
20 Aug 2026 - 27 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in trenches not exceeding 1.5 metres wide and not exceeding 1.5 metres deep for pipe line in soft/loose soil, getting out and levelling of bottom surface to required level complete all as specified and directed by Engineer-in-Charge | 3,200 | Cum | - | - |
| 2 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engr-in-Charge. | 2,710 | Cum | 1 | ₹2,710 |
| 3 | Removal of excavated material from site to a distance not exceeding 50 meters away and depositing where directed at a level not exceeding 1.5 meters above the starting point complete all as specified and directed by Engr-in-Charge. | 490 | Cum | 2 | ₹980 |
| 4 | Excavation in trenches by cutting of road crossing, PCC hard standing for taking out/laying of pipe lines including PCC (1:2:4) type B-2 (with 40 mm graded aggregate) in foundations, filling and mass concrete complete including making good the existing surface complete all as specified and directed. | 12 | Cum | 3 | ₹36 |
| 5Taking up/down old Cemented/GI/Nidhi/CI/MS Pipes including all fitting of the following sizes as specified and directed by Engineer-in-Charge :- | |||||
| 5.01 | (a) 100 mm bore | 1,680 | RM | 4 | ₹6,720 |
| 5.02 | (b) 150 mm bore | 1,570 | RM | 5 | ₹7,850 |
| 5.03 | (c) 200 mm bore | 1,170 | RM | 6 | ₹7,020 |
| 5.04 | (d) 250 mm bore | 720 | RM | 7 | ₹5,040 |
| 6Supply, laying jointing, testing DI pipe with class-K-7 spigot socketed ends , conforming to IS-8329 laid in trenches of the following sizes as specified and directed by Engineer-in-Charge:- (Note : Tyton Joint, Excavation & earth work shall be measured & paid separetely.) | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.40 MB
1.1 Common pages.pdf
Tender Documents • 0.51 MB
1.2 Credit schedule.pdf
Tender Documents • 0.03 MB
1.2.1 General Summary of Sch.pdf
Tender Documents • 0.01 MB
2.1 Sch. B. C.pdf
Tender Documents • 0.13 MB
3.0 Min Wages.pdf
Tender Documents • 0.11 MB
4.0 Special Condition.pdf
Tender Documents • 0.20 MB
5.0 Particular Specification.pdf
Tender Documents • 0.36 MB
6.0 List Of Materials Appx A and B.pdf
Tender Documents • 0.11 MB
7.0 Recovery testing charges Appx C.pdf
Tender Documents • 0.12 MB
8.1 List of Makes Appx D 1.pdf
Tender Documents • 0.23 MB
8.2 List of Makes Appx E.pdf
Tender Documents • 0.23 MB
09. Appendix F.pdf
Tender Documents • 0.05 MB
10.0 Appendix G & H.pdf
Tender Documents • 0.12 MB
BOQ_880234.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].