S/R of PWD B and R Colony at Sirsa (S/R to E.I and Street Light only) (Pdg. Street Light only).

Amount

Wires and Cables Supply and erection of PVC copper insulated and sheathed 2-core circular flexible wire. (HSR 31.9). i (d) Size 1.50 sqmm ( 48 / 0.20mm).

Main Switches Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections. (HSR 31.12 (a). v) Double pole switch 32 amp. 415 Volts Cat-B.

xiv) Triple pole switch with neutral link 32 amp. 415 Volts Cat-B.

Distribution board with plug and socket. Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc (HSR 31.15). ii) S.P.N. enclosure for single pole MCB 20 amp.

Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. (HSR 31.17). Miniature circuit breakers of 9 KA breaking capacity. ii) SP MCB 6 amp. to 32 amp.

iii) SPN MCB 6 amp. To 32 amp.

vi) TPN MCB 6 amp. to 32 amp.

Supply and erection of Fittings and Accessories. (HSR 31.18).vii) Call bell 220 / 230 volts A.C. Bakelite with double coil.

ix (b) Bell push flush type ( without flexible wire ) in existing sheet.

xi) Bakelite angle / straight button holder large size.

xii) Switch 5 amp. On existing sheet.

xiii) Wall socket 5 amp. On existing sheet.

xx) Supply and erection of rectangular bulk head fitting of size 17 cm x 14 cm, aluminum casted with aluminum colour out side and white stove enameled inside/complete with guard, glass etc. secured by brass screws suitable upto 100 watts lamp with B.C. lamp holder but without lamp.

Pipe Laying.Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. (HSR 31.21). xiii) Galvanized iron pipe 50 mm dia on flushed.

xxii) Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

(Q) Earthing (HSR 31.22). i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required.

xvi) Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required .

Supply and erection of underground cable ,loose in existing pipe or trenches complete with necessary connections. (HSR 31.26). xxxix) 10 Sq. mm 4 Core Ard. Cable.

Street Light. (HSR 31.30).IV) Supply and erection of weather proof M.S.Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangements , housed in wall , including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections .

Wiring in existing Conduit pipe (Recessed) for Electrical points. Wiring only in 1.5sqmm PVC insulated copper conductor cable in existing conduit pipe and MS box covered with 5 mm thick Bakelite sheet including cost of switch, wall socket, ceiling rose etc. (HSR 31.38). I) Fan Point b) Medium Point

II) Light Point a) Short Point

b) Medium Point

c) Long point

III) Twin control light point with 2 way, 5 amp. Single pole switch a) Short Point

c) Long point

VI) Call bell point c) Long point

VII) 3-pin 5 amp. Plug point including earthing the 3rd pin etc. a) Short Point

b) Medium Point

c) Long point

VIII) 3-pin15 amp. Plug point with 4 sqmm PVC insulated copper conductor cable including earthing the 3rd pin etc. c) Long point

S/E of PVC unsheathed copper conductor cable single core 1100 volts grad in pipe of suitable size excluding cost and erection of pipe. (HSR 31.40). i) Cable size 1.5 sqm(3/0.81 mm)

ii) Cable size 2.5 sqm(3/1.05 mm)

iii) Cable size 4 sqm(7/0.85 mm)

iv) Cable size 6 sqm(7/1.05 mm)

S/E of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. (HSR 31.41). i) 4-way, SP&N (Horizontal)

ii) 8-way, SP&N (Horizontal)

v) 4-way,TP&N (Horizontal)(8+12)

Supply and errection of double walled corrugated (DWC) HDPE pipe laid 1 meter below ground level including diging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of the labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. (HSR 31.67). i) HDPE pipe 63/50 mm outer dia/ inner dia

Non Schedule items : S/I/E/T/C of 5 Mtr. (5000mm) long decorative pole as per approved drawing with cast aluminum/ cast iron Q4 & Q6 embellishment made of mild steel and Galvanized pole of Harvest Green/ Burgundy colour. The pole should be divided in two sections :- A) at bottom Dia140 MM, Thickness 4.8 MM & Length 1000 MM and at upper portion Dia 75 MM, Thickness 3.2 MM & Length 4000 MM with decorative ring , with service window containnig 6 amp SP MCB, 4 way conector and accessories, pole is with casted embellishment at middle and bottom to complete the job in all respect including erection, fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work. As per approved make list of Department.

Supply and erection of Single Arm Bracket (Cast Aluminium) same colour and same make as per approved drawing and accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work.

S/E/I/T/C of 60 watt 6000 K modern decorative hanging street Light fitting as per approved drawing and accessories made of cast aluminum housing with power LED's are mounted directly on the extruded aluminum heat shrink. A UV stabilized PC/PMMA diffuser is provided for glare free lighting with high visual comfort complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work. Make TWINKLE/ LUXMAX/ Mayfair (Sumaglli)/ Twinkle Lite.

Supply and erection of 25 W LED Post lantern new generation energy saving envirmental friendly long life aesthetically desinged with symmetrical light distribution, spen aluminium land scap luminiaries with high power LED as light source with the protection of IP-65 of LHEVBGP7PN 6K 025 (Rubby clear) of Havell's make/ BLPTSP 25 W NW LED of Bajaj make/ LPTH-20- CDL of Crompton make complete with all accessories and labour to complete the job upto the entire satisfaction of Engineer-in-charge of the work.

Const. of R.C.C Foundation for 5 Mtr. (5000 mm) Decorative Poles (Cast Iron) 1:1.5:3 for foundation, size 0.7 M x 0.7 M x 1.8 M with minimum of 8 nos 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200mm C.C for fixing the pole with SF 16/18 mm dia 18" Long hot dip galvanized L type 4 Nos. Anchor bolts with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work.

Supply of 48” (1200 mm) ceiling fan complete with standard down rod, three blades fitted with double ball bearing ISI marked white/ glossy but without regulator (Orient / Usha/ Khaitan).

Dismantled material Dismantled of old Ceiling Fan

Dismantled of Existing street light pole

The Sirsa Bansivat Co Operative L C Society Ltd.

M/S NATWADIA ELECTRICAL COMPANY

M/s JSB Enterprises

ESS ESS ENGINEERS