Improvement/Stabilization of HT/LT Network / Replacement of Worn-out Conductor/Rotten Poles Network in Sub-Division Handwara and Langate falling under jurisdiction of ED Handwara under UT capex Budget 2021-22

Amount

Supply,Loading, Transportation, insurance, Unloading, Carriage and Delivery at Site (including Head load) and erection of 9 Mtr. Long Poles (ST-410, SP-33) with pit excavation, refilling the pit with soil, boulders

Supply,Loading, Transportation, insurance, Unloading, Carriage and Delivery at Site (including Head load)and Erection of S.T Poles 8 m long (410-SP-15) complete with pit excavation , refilling the pit with soil and boulders .

Loading, Transportation, insurance, Unloading, Carriage and Delivery at Site , Laying , stringing, tensioning and binding of 50 mm2 ACSR Conductor , including joints by PG clamps wherever required.(conductor to be supplied by deptt)

Loading, Transportation, insurance, Unloading, Carriage and Delivery at Site , Laying , stringing, tensioning and binding of 30 mm2 ACSR Conductor , including joints by PG clamps wherever required.(conductor to be supplied by deptt)

Cement bottoming of S T poles in 1:3:6 mix as per REC standard 0.5/0.45 cum/pole, muffing 20 cm above ground, including plaster and curing of concrete.

Supply and Painting of poles with one coat of redoxide and two coats of Aluminium paint of standard quality.

Supply and Erection of Galvanized stay set complete with 50 x 8 mm stay clamps, guy insulators 02 nos, anchor plate (200 x 200 x 6 mm), nut bolts ,02 No turn buckle ,1.8 m long, 16 mm dia solid GS rod & 7/3.15 mm dia G.I stranded wire complete.

Supply and fixing of pole Earthing by G.I pipe 40 mm dia or G.I rod 20 mm , 2.5 mtr long through GI strip.

Supplying and fixing of pole Earthing Complete by GI Spiral Earthing, 8 SWG 115 turn coil earthing as per REC Standard

Supplying and Fixing of Danger Plates with clamps with writing in English and Regional Language

Supply and fixing of anti-climbing GI Barbed wire binding with Clamps at a distance of 30 to 40 cm at a height of 3.5 to 4 m from ground level. At-least 3.5 kgs GI barbed wire(12 SWG) is to be used per pole for the purpose.

Supply , and fixing of GI “V’ cross-arm (75x40x40x6)mm with Pole Top Bracket including back clamps of 50X8 mm for fixing V-Cross arm and pole top bracket without making holes in the ST pole as per REC standard for single pole structure as per REC standard.

Supply & installation testing commissioning of 11 KV 3 -phase 3 pole , 400 Amps G.O AB Switch complete with all accessories as per REC standard

Supply and Fixing of 11KV,400 Amp Double Break Isolator with Earthing Blade along with Base Channels ,operating Handle complete with all accessories as per REC standard.

Supply & fixing ,testing, commissioning of 11 KV Disc. Insulators 45 KN (Polymer) with fittings as per REC specification.

Supply and Fixing of LT Structure Single shackle set (Mukhi Type) as per REC standard.

Supply & fixing, testing ,commissioning of LT shackle Insulators 16KN as per REC specification.

Supply & installation ,testing , commissioning of 11 KV Pin Insulators (Polymer) with pins 5KN as per REC specifications.

Dismantling and Re-erection of 9 Mtr. Long Poles (ST-540, SP33) with pit excavation, refilling the pit with soil, boulders and returning of same to Divisional Store.

Dismantling and Re-erection of 8 Mtr. Long Poles (ST-540, SP33) with pit excavation, refilling the pit with soil, boulders and returning of same to Divisional Store.

Dismantling of old stranded ACSR conductor and Re-conductoring of 0.03/0.05 ACSR conductor and returning of same to Divisional Store.

Supply & fixing of GI nuts and bolts of sizes

M/S KHAN ELECTRICAL CONSTRUCTION AND SUPPLIERS

M/s ELITE ELECTRICALS