Building repairs and PVC paneling for the Ambedkar e-library in the Municipal Council area.

Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix :1:4 (1 cement : 4 fine/ coarse sand)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture

P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absorption less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grouting the joints with white cement and matching pigment etc complete. size 600 mm X 600mm

Providing and fixing 1st quality MAT finished ceramic tile size300x300mm confirming to IS : 13755 and IS : 15622 colour such aswhite, grey, ivory, fume red brown, light green, light blue and otherlight shades in floors, steps, pillars etc. laid on a bed of neat cementslurry finished with flush pointing in the white cement mixed withpigment to match the shade of the tile complete (including the costof cement mortar bed 1:4)

Providing and fixing at all height false ceiling including providing andfixing of frame work made of special sections power pressed fromM.S. sheet and galvanised in accordance with zinc coating of grade350 as per IS : 277 and consisting of angle cleats of size 25mm widex 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre tocentre one flange fixed to the ceiling with dash fastener 12.5mmdiax40mm long with 6mm dia bolts to the angle hangers of25x25x0.55mm of required length, and other end of angle hangerbeing fixed with nut and bolts to G.I. channels 45x15x0.9mm runningat the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mmeach having clips of 10.5mm at 450mm centre to centre shall befixed in a direction perpendicular to G.I. channel with connectingclips made out of 2.64mm diax230mm long G.I. wire at everyjunction including fixing the gypsum board with ceiling section andperimeter channels 0.5mm thick 27mm high having flanges of 20mmand 30mm long, the perimeter of ceiling fixed to wall/partition withthe help of rawl plugs at 450mm centre to centre with 25mm longdrive-all screws @ 230mm interval including jointing and fixing to alush finish of tapered and square edges of the board withrecommended filler, jointing tapes, finisher and two coats of primersuitable for board as per manufactures specification and alsoincluding the cost of making openings for light fittings, grills,diffusers, cut-outs made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction ofthe Engineer in-charge but excluding the cost of painting with :31.45.1 12.5 mm thick tapered edge gypsum board conforming to IS: 2095-Part I,

A

B

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ ppropriate Z sections and other sections of approved makeconforming to IS: 733 and IS : 1285, fixed with rawl plugs andscrews or with fixing clips, or with expansion hold fasteners includingnecessary filling up of gaps at junctions, at top, bottom and sideswith required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereverrequired including cleat angle, Aluminium snap beading for glazing /panelling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-charge.(Glazing and panelling to be paid for separately) :37.1.1 For fixed portionPolyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)