Loading…
Loading…
Tender Value
₹2.4 Cr
EMD Value
₹4.8 L
Closing Date
2 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
TRACK3
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-XIVA, of STD/Jan/26 along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- Any P-Way works.
34 conditions · 8 needing a document upload
Check list should be as per the annexure-XXIII as given in the tender document attached. Note: Tenderer's attention is invited to clause 1 of Section VII and other relevant clauses of Section I and II whereby in case of nonsubmission/ non compliance, the tender offer is likely to be rejected.
1.1) Following documents are common for all types of firms i.e. Sole proprietorship, Partnership, Limited Company or JV.
(a)Tender Form (First Sheet) as per 'Annexure-I' (Mandatory)
(b) Firm details as per Annexure-II
(c)Format for Certificate as per proforma given in 'Annexure-III A' (Mandatory)
(d) List of works of similar nature physically completed in all respects in current and last three financial year as per proforma given in 'Annexure-IV'
(e)Work Completion Certificate of works mentioned in para (d) above from the Organizations with whom they worked as per proforma given in 'Annexure-V' as applicable. (Mandatory)
(f)List of works on hand as per proforma given in Annexure-VI
(g)List of plants & Machinery available on hand (own) and proposed to be inducted (own and hired to be given separately) for the subject work in Annexure-VII.
(h)List of Personnel, Organization available on hand and proposed to be engaged for the subject work in Annexure -VIII.
(i) The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-XIVA, of Standard Tender Document along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(j)Self attested copy of Permanent Account Number (PAN) issued by Income Tax Department.
(k)The tenderer(s) are required to submit the test report of the stone ballast conforming to railways specifications as given in the condition no.7.2.2 of section-VI along with their offer, issued from the approved laboratory as listed in condition no 7.1.1(a) of section-VI in the tender documents. (This item will be applicable only for the tenders of supply of ballast).
(l)Any other document in support of his/their credentials/scheme.
(m)Contractual Receipt of the year on the Letter Head of Chartered /Cost accountant. 'Annexure-IX' (Mandatory)
1.2 In addition to Para 1.1 above certain more documents are to be submitted by tenderers as per status of their firms. These documents are listed below - (Mandatory)
1.2.1For Sole Proprietorship firm a)Affidavit as per 'Annexure - X'. b)Special power of Attorney as per proforma given in 'Annexure-XI' to be submitted by sole proprietor firm duly notarized.(Not required if tender documents are submitted by proprietor himself) (Mandatory)
1.2.2 For Partnership firm a)Self/Notary attested copies of Partnership deed. b)Special Power of Attorney as per proforma given in 'Annexure-XII' to be submitted by Partnership firm. (Not required if one or more partners are authorized in Parternership deed to sign on behalf of the firm.) (d)All other documents in terms of explanatory notes in clause 22 of Standard Tender Document.
1.2.3 For Limited Company a) Copy of Memorandum & Articles of Association of Company. b)Self /Notary attested copy of resolution passed by Board of Directors authorizing its Director/Employee to deal with tender on behalf of company. c) 15.1.1 Attested copy of Notarized Special Power of Attorney including ratification clause duly signed by person authorized by the company vide (b) above as per proforma given in 'Annexure- XIII'. d) A copy of Certificate of Incorporation (Mandatory)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
NOTE: BE IT KNOWN TO THE TENDERER THAT :-
All mandatory documents are required to be submitted by the bidder/tenderer at the time of bidding, in case of nonsubmission/ noncompliance, the tender offer is likely to be rejected.
(a)No post tender submission of documents shall be permitted in respect of item mentioned above. However, only clarification can be called for by Railway in respect of any part / document submitted by the tenderer which shall be responded to by the tenderer within 10 working days of the date of issue of such letter for clarifications, failing which the offer shall be dealt with as per available documents.
(i) P-Way maintenance in between DKJR-BVU,BVU-BHNG and RPAN-DKGN under SSE/P-Way/RPAN for one year. (ii) P-Way maintenance in between RNY-DKJR under SSE/P-Way/MJBT for one year
45-ENGG-RNY-2026-27~NFR
45-ENGG-RNY-2026-27
Open
Works - General
12 Months
Kamrup, Assam
₹0
₹4.8 L
10 Aug 2026
10 Aug 2026
19 Aug 2026
178 items across 28 schedules · ₹3,15,44,641.09 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| of all types & length in track, & density of sleeper to the under traffic block. Rates of rail with sleepers with fastenings and fixing of fish or, if required, providing gap stacking of released material within 250m as directed Note: Rail drilling and separately. | — | — | — | — | |
| 1 | Rail Renewal work | RM | 300.00 | 42.26 | 12,678 |
| any type of sleepers in track lying on cess or at Bridge casual renewal at isolated fittings complete to specified level with contractor's tools and dressing of ballast, as Engineer in-charge. Released neatly stacked and handed location within an average or near either side of Bridge directed. | — | — | — | — | |
| 2 | than Ballasted Deck Bridge | Each | 200.00 | 532.7 | 1,06,540 |
| 3 | Bridge | Each | 100.00 | 629.53 | 62,953 |
| fish plated rail joints under Grease Graphite Grade 'O' oil supplied by contractor, rail sections as per procedure version of IRPWM and as In charge. Note: Release to be deposited back. If any jammed it should be cut with and replaced with fresh | — | — | — | — | |
| 4 | fishplates | Joint | 850.00 | 137.31 | 1,16,713.5 |
| 5 | refixing of Joggled fish plates joints/rail of any rail section to enable examination of departmental official nominated charge and lubrication of applying departmental Grease 'O' (IS:408) to fishing planes departmental black oil as per down in latest version of all tools required and as Engineer-in-charge. Note: 1. black oil, fish bolts, K.Oil, for work shall be given by issued at concerned SSE/PW fish bolts shall be cut using and replaced with new | Set | 1400.00 | 58.97 | 82,558 |
| 6 | Elastic Rail Clips on PSC contractor's grease, conforming specifications, labour etc. procedure prescribed in latest | ERC | 150000.00 | 4.49 | 6,73,500 |
| 7 | ERC from SGCI inserts of by using suitable approved re-fixing after greasing of insert with Contractor's grease of as per provisions of IRPWM, Engineer in-charge. Note: 1.List along with location shall be inspection of SSE/P.Way and execution of this item. 2. Due taken to avoid any damage to penalty of 50% of the basic in nearest sleeper factory each, if SGCI insert is broken cracked in the process. | ERC | 100.00 | 64.77 | 6,477 |
| Plate/Rail screws of Points and Bridges, Curves etc., with including removal of screws damaging sleepers, cleaning etc., both screws and dowel grease graphite, refixing the the top and sides of screw graphite to prevent ingress of corrosion with contractors consumables under traffic and lift complete. | — | — | — | — | |
| 8 | Grease Graphite | Each | 4000.00 | 42.55 | 1,70,200 |
| of different diameter and of any section and any UTS in emergencies with labours, tools & plants, | — | — | — | — | |
| 9 | and above | Each | 300.00 | 341.85 | 1,02,555 |
| 10 | 26.5mm | Each | 200.00 | 238.58 | 47,716 |
| 11 | SEJ with improved SEJ with traffic block conditions as drawing including fixing of bearing plate, rubber pad and rail fittings, greasing to the rails, sleepers & fittings to site, stacking of released materials 250m, cutting of Rails, drilling of related fittings, providing connection with fishplates till done and sleepers shall be packing to make track fit for Note: (1) Rail cutting and hole paid separately. (2) One set SEJ on both rails at SEJ. | Set | 2.00 | 9,692.04 | 19,384.08 |
| Item- 2 | Renewal for P-Way maintenance SSE/P-Way/RPAN | in between | — | DKJR-BVU,BVU-BHNG | and |
| Schedule total | ₹14,01,274.58 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TD_45_ENGG_RNY_2026_27.pdf
ATTACHMENT
2026_03_13AdvanceCorrectionSlipNo_11.pdf ACS 11
ATTACHMENT
2026_03_13AdvanceCorrectionSlipNo_11.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].