Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.0 LAccepted-AOC FLAT NO 402 4TH FLOOR BLDG NO 31 HANSGEET CO OP HSG SOCIETY PANT NAGAR GHATKOPAR E MUMBAI 400 075 | MUMBAI SUBURBAN | MAHARASHTRA | 400075 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹22.2 L+₹70,865.20 (3.29%)Rejected-Finance PART III GANESH MURTHI NAGAR CAPT PRAKASH PETHE MARG CUFF PARADE ROAD COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹25.8 L+₹4.3 L (20.0%)Rejected-Finance | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹30.6 L+₹9.0 L (42.0%)Rejected-Finance FLAT NO A 102 ASHOKVAN RAJSHIV CO OP HSG SOC SHIV VALLABH ROAD DAHISAR EAST MUMBAI 400 068 | MUMBAI SUBURBAN | MAHARASHTRA | 400068 | L4 | Rejected-Finance Being other than lowest |
Tender Value
Refer Docs
EMD Value
₹96,000
Closing Date
10 Aug 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NW) Navy Nagar, Colaba, Mumbai
GE NW NAVY NAGAR COLABA MUMBAI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI
REPAIR MAINTENANCE OF CERTAIN BR DAY TO DAY MAINTENANCE WORKS AT NEW NAVY NAGAR UNDER AGE BR I OF GE NW NAVY NAGAR COLABA MUMBAI
2022_MES_538127_1
8230/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) Navy Nagar, Colaba
Class D and Category a(i)
8 documents required · 8 mandatory
₹500
GE NW NAVY NAGAR COLABA MUMBAI
₹96,000
Yes
8 Oct 2022
14 Jul 2022
11 Aug 2022
14 Jul 2022
10 Aug 2022
28 Jul 2022
14 Jul 2022 - 3 Aug 2022
Amount
Taking down cement plaster of any description including racking out joints, hacking for key, scrubbing down with water & removal of debrises outside MD land.
M&L Plastering on concrete surfaces of ceiling, beams, lintels, walls etc, 20mm thick (10+10mm)in two coats in CM (1:4) , mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished fair & even without using extra cement complete all as specified (WPC to be mixed in setting coat only and shall be measured and paid separately)
M&L rendering 15mm thick in CM (1:6) on wall finished even and fair without using extra cement as in patches all as specified and directed by Engr -in- Charge.
All as above but 10mm thick in CM (1:3) in ceilling
M & L applying one coat of Rust remover and rust passivator on exposed reinforcement surfaces at any height all as specified and directed. Make :- Pidiite fosroc or equivalent
M&L preparation of new undecorated surfaces of walls,soffits & fascias of chajjas etc and applying two coats of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of primer complete all as per manufacturers instructions all as specified & directed by Engineer-in-charge.
M&L for preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer all as specified and as directed
M&L applying three coats of white wash on new plastered surfaces including preparation of surfaces as in ceiling all as specified.
M&L applying one coat of white wash on old plastered surfaces including preparation of surfaces as in wall all as specified.
All as per item No 9 above but on ceiling
M&L applying one coat of oil emulsion distemper white or tinted on wall after necessary preparation of surface including removal of swelled popup paint, cracks and applying wall care putty to make the surface even complete all as specified.
M&L applying two coats of oil emulsion distemper white or tinted on wall after necessary preparation of surface including removal of swelled popup paint, cracks and applying wall care putty to make the surface even complete all as specified.
M&L preparation of old undecorated surfaces of walls,soffits & fascias of chajjas etc and applying one coat of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of primer complete all as per manufacturers instructions all as specified & directed by Engineer-in-charge.
M&L applying one coat of synthetic enamel paint including preparation of old wooden surfaces over 10cm width/girth all as specified.
M&L preparation of old painted surfaces over 10cm width or girth and applying one coat of synthetic enamel paint on steel surfaces all as specified
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
S & F Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) size 300x 300 mm area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding layer in CM 1:4 complete all as specified
S&F Glazed colour ceramic tiles in vertical surfaces 300 x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick redering as backing layer in CM 1:4 complete
Material & labour for glazed ceramic tiles in vertical surface 300x450x7 to 8 mm thick set and jointed in neat cement slurry over and including 10mm thick cement plaster in cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and as directed by Engg-In-Charge.
Material & labour for non skid coloured jointed free ceramic tiles of size 600mmx600mmx10mm thick in floors over and including 20mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engg-In-Charge
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed
M&L machine cut pre-polished kota stone slab in riser of steps, skirting, dado windows cill and pillar laid over and including 10 mm thick cement plaster in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including demolition of existing floor finish (Note : The rate includes the cost of cement plaster )
Material and labour for Granite(of any type) 18-20mm thick slab laid on floor machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone over 15 mm thick screed bed in cement mortar (1:6) including grinding & polishing complete all as specified and as directed
All as per item No 23 above but on wall skirting /dado over 15 mm thick Cement mortar (1:4) complete all as specified and as directed
M&L udaipur green/baroda green marble slab 18-20 mm thick over similar work machine cut, bedded and jointed with grey cement slurry over and including 10 mm thick screed bed in cement mortar 1:3 and pointed with white cement using marble dust with admixture of pigment to match the shade of marble slab including grinding and polishing complete (Note : The rates included the cost of cement screed bed 10 mm thick)
Rounding to edges of stone slabs (kota/granite etc) one edge, such as in steps, cooking platform, and other similar situations
Extra for forming grooves over granite or kota stone slab as in staircase complete all as specified and as directed
Demolition of concrete of any description and in any position not otherwise specifically provided for including chaina mozaic, WC etc. removing the debris from MD complete upto 4 storey.
M&L for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 15 mm thick in CM 1:3 mixed with water proofing compound and applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical sides of sunken floors. (Note : WPC shall be measured and paid seperately)
Supply only integral waterproofing compound of ISI make.
M&L cement concrete 1:7:12 with 40mm graded stone coarse aggregate in sunken floor all as specified and directed
S & F in repairs Pillar taps of 15 mm dia , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.
S&F in repair soap dish stainless steel and fixed with screw including wooden/plastic cleats complete all as specified and directed.
S & F in repairs PVC connectors of 15 mm size with PTMT nuts of length 600 mm length
S & F in repairs PVC waste pipe of 32 mm dia 900 mm length
S & F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x 440 mm white with `P' or `S' trap, front or back inlet and integral foot rests including connection to trap, to flushing pipe etc. complete including making good to floor complete all as specified and as directed.
S & F in repairs Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding water taps waste chain plugs and porcelian stopper but including brackets
S&F in repair Sinks with drainage board made of stain less steel 1mm thick, kitchen with plugs, washer and wastes; Including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm. Complete all as specified and as directed.
All as per item No 39 above but, without drain board overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm. Complete all as specified and as directed.
S&F in repair Kitchen plate rack made out of 1mm thick stainless steel of size 750mm x 600x 200mm complete all as specified and directed.
S & F in repair 10 ltrs capacity PVC valveless, syphonic action type,flushing cistern,low level,white,with inlet ,ball valve, float and handle including 600mm PVC commector pipe and flush pipe (long bend) for low level cistern complete all as specified and directed.
S&F in repair Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws & wooden/plastic cleats(Minimum weight 190 gms)
S & F in repair PTMT shelf fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 300 gms)
S&F in repair PVC cabinet size 450x600mm with looking mirror in white colour complete all as specified.
S & F in repairs Stainless sink coupling of external 110mm dia along with necessary fittings.
S & F in repairs CP grating of size 125 mm
S & F in repairs cupboard/drawer pulls, 3 screw plate with fixed dished pull, 80 mm to 100mm long handle brass type.
M&L in repair aluminium powder coated drapery rod of 20 mm dia including curtain rings (minimum 6 Nos for each curtain rod) complete (Make : as approved by GE)
S&F aluminium powder coated fancy type domes cum bracket (20 mm dia) fixed to both ends of the drapery rod and wall complete all as specified and directed (Make : as approved by GE)
Supply and fixing in repair of 04 pieces pulley operated Cloths Drying system casting of Aluminium pipe of outer dia 22 mm inner dia 19.8 mm and channel pair of length 2.00 mtr with pulley made up of devil mounted and fixed with self tapping screw. Rope will be HDPE double core of 4 mm with rope Guide at locking system to hide rope. Channel to be dia of minimum weight of pipe shall not be less than 0.20 kg/Rm and maximum weight of Pipe in one unit not less than 2 kg. Weight of rope shall be not less than the 550 gms / mtrs including taking down old unserviceable cloth hanger complete all as directed. Make :- As per sample approved by GE
Taking down and refixing PVC profile suitable for 275 ltrs loft tank including fixing of aluminium channel around the profile complete all as specified and directed.
Demolition of cement Concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level)
M & L Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 40 mm thk in flooring, all as speciifed and directed
S &F in repairs Cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4)
Dismantling wrought iron or mild steel work of any description not otherwise provided for
S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming including working platform/scaffolding). Complete all as specified and as directed by Engr-in-Charge
S&F Framed brackets of angles or tee with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles as necessary gusset plates, riveting etc nexc each 10Kg bracket confirming to Fe 410 or Fe 310-0 including working platform/scaffolding) Complete all as specified and as directed by Engr-in-Charge.
S&F rolled section as in main and cross beam, hip and jack rafters, purlins where connected to common rafter and running rails etc complete conforming to Fe-410- W(Gde?E-250) quality?B including working platform/scaffolding) Complete all as specified and as directed by Engr-in-Charge.
Material and labour Steel work in tubular railing including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including working platform/scaffolding) Complete all as specified and as directed by Engr-in-Charge
S&F 10 mm dia 100 mm long dash through fasteners bolts fixed in concrete or brick work to hold brackets etc complete
Material & Labour for preparaing of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and as directed by Engr-in-Charge.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings
M&L pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including making grooves of minimum 50mm into brick walling and inserting the sheets into these grooves including working platform/scaffolding) Complete all as specified and as directed by Engr-in-Charge
S & F in repairs anodized aluminium DECO grills 7.5mm thick, as existing grills, DG - 102
S & F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to wooden/aluminium frames complete all as directed and as specified
S&F in repair 5.5 mm thick frosted glass ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame including hacking out broken glass panes of any description from wooden frames or aluminium fixed with beads.
S&F in repair 100mm stainless steel Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.
S&F in repair 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F in repair 150mm long aluminium anodised barrel tower bolts of extruded section.
S&F in repair 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy and fixed.
S&F in repair 140mm long Floor door stopper of brass body and tongue with hard drawn steel spring , fixed in floor complete all as specified and directed.
Resecuring or easing & adjusting of shutters, without taking down but exc 1 sq. m and n exc 2 sq. m each
Resecuring or easing & adjusting shutters , without taking down upto 1 sq. m each
Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified.
S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
S & F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but n. exc 04 Sqm each complete all as specified.
Taking down shutters of any description exceeding 1 Sq. M and not exc 2Sq.M each at any storey of building complete all as specified and directed.
S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.
S&F, 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Suppling and fixing 2nd class hardwood 35mm thick skelton shutters, open rebated and prepared to receive wire mesh edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing mesh etc, sizes of members of shutters as specified in SSR complete all as specified and directed by Engg-In- Charge.
M & L for Cub-boards shutters and shelf made with 19mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame-work including 6mm teakwood lipping complete all as specified and directed upto 12 storey of bldg.
Supply and fixing 2nd class hardwood bullnosed splayed, chamfered or rounded on edge fillets rectangular in section, sectional area exc 6 but n. exc 13 Sqcm fixed in repairs fixed with nails complete all as specified and directed by Engg-In- Charge
All as per item No 86 above but sectional area exc 13 sq cm and not exc 25 sq cm complete all as specified and directed by Engg-In- Charge .
S & F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm at any storey of building
S & F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to wooden/aluminium frames complete all as directed and as specified
S&F 100mm stainless steel Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.
S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
All as per item No 91 above but 125mm.
S&F 150mm long aluminium anodised barrel tower bolts of extruded section.
All as per item No 93 above but 100mm.
S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy and fixed.
S&F 140mm long Floor door stopper of brass body and tongue with hard drawn steel spring , fixed in floor complete all as specified and directed.
M & L preparing new wood or wooden surfaces over 10 cm of width or girth and applying two coats of synthetic enamel paint over a coat of pink primer upto 9 storey
S&F in repair Aluminium anodised section 15 micron for window (Sliding type) / ventilator (Partly fixed party louverd type) etc of anodised aluminium section ventilators partly fixed partly louvered type comprising frame, shutters, locking arrangements including necessary jamming, glazing pins, neoprene beading, glazing pin screw, levered aluminium sections for louvered glass, rollers , handle etc including taking down u/s one, complete all as specified & directed. Note : (a) Glazing shall be measured separately. (b) Item shall be paid as per weight of aluminium section. (c) Rate quoted shall be inclusive of neoprene beading, glazing clips, screw etc as required which not be measured for arriving the weight. (d) Rate shall be inclusive of the aluminium handle, locking arrangement including complete packing with silicon gel around contecting surface of aluminium and including matching the existing surface area complete all as specified. (e) Aluminium window / ventilator etc to be fixed with cadmium plated screw not more than 300mm c/c .
S&F 5.5 mm thick frosted glass ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame complete all as specified and directed.
Supply and fixing in repair/ replacement of 15mm bore internal steel water tubing, galvanised, Medium grade with all fittings such as nipple, union, socket, elbow, bends, fixed to wall including work to be done up to 15 th floor in high rise buildings in short piece/length, including breaking the existing brick wall for replacement of corroded GI pipe in/ on wall and making good the disturbed surfaces to match previous structure with complete all as specified and directed by Engineer-in-charge of following sizes :-
All as per item No 100 Above but 20mm bore
Disconnecting existing water tanks, exc 500 but n exc 1000 ltrs setting aside (or lowering if required) for repair etc and hoisting reconnecting and refixing in position complete all as directed by Engr in Charge ( cleaing/repairing measured separately )
Disconnecting existing water tanks, exc 1000 ltrs but n. Exc 2000 ltrs setting aside (or lowering if required) for repair etc and hoisting reconnecting and refixing in position complete all as directed by Engr in Charge ( cleaing/repairing measured separately )
Removal of existing water proofing treatment of the roof, cleaning with wire brushes etc including demolition of PCC padding of any description and in any position.
M & L for Plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) mixed with Shali Plast LW+ of STP/Pidilite URP of Dr. Fixit or Equivalent and appoved as per manufactures instruction. Before laying concrete surface shall be cleaned and a bond coat of slurry with Shali Crete URP (of STP) or quivalent with cement to be applied. Alll cracks in slab to be openend in 'V' groove and filled with Shali Fix RMC a Polymer Morter of STP/ equivalent complete all as specified and as directed.
M&L for 20mm thick rendering in CM 1:4 with the addition of Shaliplast LW+ @ 200ml per bag of cement on fair faces of brick or concrete surfaces all as directed by Engr-In-Charge.
M&L for protecting the roof including parapet wall with water proofing coating ,complete as specified below: (a) Clean the surface and apply one coat of primer (STP Shali Urethane BTD diluted in water in 1:1 ratio and applied @ 400 gm/sqm OR Dr, Fixit primeseal diluted in water in 2:1 ratio and applied @ 7-8 sqm/ltr) and allows to dry for 6 to 8 hrs. (b) Apply first coat of water proofing coating over primer surface (Shali Urethene BTD with non butuminous bleding of STP Ltd. @ 1 Sqm/Ltr without dilution OR Dr. Fixit New Coat without any dilution @ 2 Sqm /Ltr) (c) Lay Non woven fiber glass mesh (Reinforcement of Shali Geo Text 40/50 gsm of size 2.5mm x 2.5mm) or equivalent with overlap of 50 mm on both direction while the first coat is still wet. (d) Apply second coat of water proofing coating as per manufactures instruction after 6-8 hrs of drying of first coat. (e) Apply third coat of water proofing coating (as per manucturer instruction) after 6-8 hrs of drying of second coat. The total thickness of 1 to 1.2mm must be achieved after 7 days of air cure. Note : 1) The colour of each coat shall be as directed by GE. 2) The work shall be carried out by aithorised applicator only 3) Water proofing to rain water spouts to be done as per manufacturer instruction
M & L for Writing letters of figures (Block, Roman, Italic or Indian) exc 60 cm but not exc 90 cm high using two coats of Acrylic paint exterior grade (100%) acrylic over a coat of primer including preparation of surfaces of walls etc specified on external surfaces. (letter writing shall be done at isolated locations at height not more than 10 m above Ground level)
P LAXMI AND CO.
sri ram construction
BOB ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .