PROVN OF HARD STANDING FOR HEAVY DD VEHS ALONGWITH FLOORING AND PAVER BLOCK UNDER ZONE-I AREA OF JAIPUR MIL STN

Amount

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed

M&L Soling (or sub base) 100 mm thick spread thickness with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller complete all as specified and directed.

M&L Laying and compacting 150 mm thick (compacted thickness) Wet Mix Macadam (WMM) laid in two layers of 75 mm thickness grading as per table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant, material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100 KN static weight and consolidating to required gradient and camber complete all as specified and directed. The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013 complete all as specified.

M&L Machine pressed precast concrete rubber moulded coloured interlocking paver block any shape and size confirming to IS 15658 - 2006 of 80 mm thickness, M-40 Grade in floors/path/parking with grey cement and pigment complete all as specified and as directed.

M&L Machine pressed precast concrete rubber moulded coloured interlocking paver block any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M-35 Grade in floors/path/parking with grey cement and pigment complete all as specified and as directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M&L preparation of new concrete/ brick/ stone Surfaces of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of priming paint plaster complete all as specified and as directed.

Removing excavated material to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed..

Sh. Manoj Nagar

Shiv Construction Company

RAMJI LAL & SONS

Deep Construction Company

SUMEET TRADING COMPANY