PROVN OF SECURITY FENCE ALONGWITH IRON FRAMED WORKS AND 4 x GATES FROM OP-2 TO VIEW POINT OF COD UNDER AGE B/R-II OF GE (EAST) JABALPUR

Amount

Excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in hard and dense soil complete all as specified and directed.

Excavating in post holes (or similar holes) in hard/dense soil each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed.

M&L for cement concrete 1:4:8, type D-2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

Supplyin only chain link MS galvanisd fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing of mesh size 75 x 75 mm including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire complete all as specified and directed.

S&F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, welding etc and similar work conforming to Fe- 290 Gde E-165 complete all as specified and directed.

S&F mild steel bolt machine made with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed and to be fitted with washers and one hexagonal or square but length of bolt exc 5 cms but n.exc 10 cm long dia shall be of 5 to 10 mm dia complete all as specified and directed.

M&L mild steel round bars 10 mm dia and over, cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia conforming to Gde E-250 or Gde E-165 complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

M&L RCC M-25 design mix using 20 mm graded crushed aggregate in foundations, including rafts, footings, foundation beams; plinth beams, ases for columns, etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L RCC M-25 design mix using 20 mm graded crushed aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides & soffits of foundation & plinth beams; and similar work, verticle or to batter rough finished surfaces of concrete flat complete all as specified and directed.

Formwork to faces of walls, retaining walls, abutments, parapets & staircase, railing and similar work including attached pillasters, buttresses, etc, vertical or to better rough finished surfaces of concrete flat complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete square, rectangular or polygonal complete all as specified and directed.

M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L Mild steel TMT bars 6 mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L PCC in foundations, filling and mass concrete type C-2 (1:3:6) using 40 mm graded crushed stone aggregate complete all as specified and directed.

Applying two coats of synthetic enamel paint on steel and iron surfaces of any description, not otherwise, described, over 10 cm width or girth including preparation of new surface and applying one coat of red oxide, zinc chrome complete all as specified and directed.

S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) and hanging, also fastening & fixing complete Gde Fe 410-0 or Fe 310-O complete all as specified and directed.

Galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured) complete all as specified and directed.

M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in hard and dense soil complete all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Schedule of credit amount of Rs. 0.00 to be deducted during AOC.

M/S N K SONKAR

M/S A.P.M. CONSTRUCTION CO.