Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹46.1 L+₹2.5 L (5.71%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹46.5 L+₹2.9 L (6.69%)Rejected-Finance RANGAPAHAR RAILWAY CROSSING GATE NO 1 DIMAPUR 797112 NAGALAND | DIMAPUR | NAGALAND | 797112 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹48.0 L+₹4.4 L (10.2%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
6 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 869 EWS
GE 869 EWS PIN 913869 C/O 99 APO
SPL REPAIR TO BLDG NO P-180 AND CERTAIN REVENUE WORKS AT LEIMAKHONG MIL STN
2023_MES_622187_1
8546/E8
Open Tender
Civil Works
Item Rate
210 days
LEIMAKHONG MIL STN
AS PER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
GE 869 EWS
₹86,000
Yes
20 Jan 2024
7 Oct 2023
7 Nov 2023
7 Oct 2023
6 Nov 2023
23 Oct 2023
Amount
Schedule 'A'
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.
M&L brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.
Ditto all as per Sl item No. 2.00 here-in-above but except brick (NOTE: Seviceable brick obtained from demolition under Sl item No 1.00 here-in-above shall be reused under the item)
Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc complete all as directed.
M&L for rendering 5mm thick on fair face of brick work or concrete surface wall or ceiling in CM 1:3 finishing even and smooth without using extra cement complete all as specified and as directed. (using Dimapur Sand)
M&L for rendering 10mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finishing even and smooth without using extra cement complete all as specified and as directed.(Using Dimapur sand).
M&L for repair to ends of chajjas/soffits/ceiling (Thickness of slab 10cm) by removing the old loose concrete material at the height upto 12 mtr cleaning the reinforcement fixing the wire mesh to reinforcement and finishing surface fair and even in cement mortar 1:4 and apply two coat of cement base paint inclding necessary scaffolding etc complete all as per directed by Engr-in- Charge
Supply only Integral WaterProofing Compound ISI Marked complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed.
M&L for 75mm thick cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in plinth protection including finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed.(Using dimapur sand)
M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store & rubish of the permises complete all as specified and directed.
M&L for Non -skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade and includig 15 mm thick screed bed in CM 1:4 complete all as specified and directed
M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm , in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade and includiing rendering 10 mm thick on fair faces of brick work in CM 1:4 for recieving vertical dado tiling complete all as specified and directed
M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed
M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed.
M&L for 75mm thick cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed. (Note:- using dimapur sand)
M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in levelled course finish even and fair for tile finishes complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified and directed.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed 20mm thick in CM 1:3 complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , including screed bed 20mm thick in CM 1:4 complete all as specified and directed.
M & L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick rendering in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , complete all as directed and as specified. .
M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as directed and as specified. .
M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as directed and as specified. .
Taking down chowkhats or frames (wooden/pvc) with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc. 4 sqm each complete all as specified and directed.
Taking down shutter of any description exc 2 Sqm each and removing unserviceable materials from site of work complete all as directed and as specified. .
Taking down shutter of any description n. exc 2 Sqm each and removing unserviceable materials from site of workcomplete all as directed and as specified. .
Taking down shutter of any description exc 1sqm but not exc 2 Sqm each and removing unserviceable materials from site of work complete all as directed and as specified. .
Taking down shutters of any description exc 1 sqm and not exc 2 sqm each including easing and adjusting and also refixing builder hardware as required including renewal of unserviceable screw and necessarry materials refixing shutter in same opening complete all as specifeid and directed.
S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F 30mm thick 2nd class HW glazed skeleton shutters open rebated and prepared to receive glass gazed etc but divided into squares with plain chamfered or rounded mitred and rebated sash bar any numbers edges of framing plain chamfered or rounded fitted with cut and mittered beads for sceuring glass guage etc. size of members as specified in SSR pt-I section 8 clause 8.20(a) fitted to chowkhats complete all as specified and as directed.
S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
Supply and fixing factory made UPVC white colour Sliding window Three track Area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each Shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) complete all as specified and directed.
Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L for 4.8mm thick plain tinted sheet glass ordinary quality in squares exc 0.5 Sqm each pane for aluminium window, complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue with hard drawn steel spring with 140mm overall length of cover plate complete all as specified and directed.
S&F 75mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F MS butt hinges 100mm. (medium weight) colled rolled complete all as specified and directed
S&F Aluminium extruded barrel tower bolt 150mm complete all as specified and directed.
S&F Aluminium extruded barrel tower bolt 200mm complete all as specified and directed.
S&F 150mm long Aluminium handles, cast type, anodised complete all as specified and directed.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed.
S&F 300 mm long mild steel ordinary rat tail rod pattern helical door springs including roller and roller plate complete all as specified and directed.
S&F 50 mm butt hunges medium weight cold rolled mild steel complete all as specified and as directed.
S&F 2nd class hard wood small fittings such as brackets of any type ,latch and hing block ,shaped door and window stops and the like including all necessary labours articles n. exe 200 cu.cm each complete all as specified and directed.
S&F mild steel flat iron as in holdfast including screwing or welding complete all as specified and directed.
M&L for provding cement concrete 1:3:6 type C1 (using 20mm graded stone agg) as in hold fast complete all as specified & directed.
S&F in repair vitreous china European type/pedastal type water closet "P" and "S" trap inclduing PVC plastic seat cover (commander) complete all as specified and directed.
S&F in repair, light coloured Vitreous china wash basin, white oval shape, size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but incl new brackets, waste pipe & CP waste coupling complete all as specified and as directed.
S&F in repairs Pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, but fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed
S&F in repair PVC flushing cistern syphonic action type,10 litters capacity, low level white with inlet ball, valve, float and handle including bracket ,PVC Connection and flush pipe complete all as specified and as directed.
S&F PVC (SWR) floor trap with grating with incl jointing to waste pipe fixed in cement concerete (1:2:4) diameter of outlet pipe 75mm complete all as specified and as directed.
S&F PVC connections 15mm size with PTMT nuts & bolt of length 600mm complete all as specified and directed.
S&F in repairs bib taps, ISI marked cast copper alloy, chromium plated fancy type screwed down, screwed for iron pipe or for brass ferule for 15 mm bore dia of pipe complete all as specified and directed.
S&F in repair stop valves (ISI marked) cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) for 15mm bore pipe complete all as specified and directed.
S&F in repairs chromium plated shower roses 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union any colour for fixing with 15mm pipe complete all as specified and directed.
S&F in repairs brass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats, complete all as specified and directed.
S&F as in repair shelf of PTMT fixed with and including chromium plated brass screw and wooden/plastic cleats ( min weight 300 gms). complete all as specified and directed.
Taking up or down 15mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.
S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Refixing of old 15mm GI tubing and connections on new or old position (walls, ceilling, floor etc) complete all as specified and as directed.
Cutting chases, pinning in. making good to facings of brick walls where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
Taking up or down 20mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.
S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Refixing of old 20mm GI tubing and connections on new or old position (walls, ceilling, floor etc) complete all as specified and as directed.
S&F in repair 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete as specified and as directed.
S&F 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floor complete all as specified and as directed.
S&F 75mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floor complete all as specified and as directed.
S&F 110mm dia PVC SWR branch bends of any radius with acess door complete all as specified and as directed.
S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia with access door complete all as specified and directed.
S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia with access door complete all as specified and directed.
S&F 75mm dia PVC SWR branch bends of any radius with acess door complete all as specified and as directed.
S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.
S & F in repairs fancy type decorative Drapary rod of 20mm dia for window and doors with decorative doom holders fixed to wall with screw complete all as specified and directed.
S&F GI Medium grade spouts 40mm dia projecting atleast 20cm clear of the wall complete all specified as directed.
Disconnecting existing tanks of capacity exc. 500 & n exc. 1000 ltrs , setting aside (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position complete all specified as directed.
S&F rotational moulded polyethylene water storage tank, ISI marked, 1000 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections and including 20mm bore brass ball valve including dismantling of old unsv tank complete all specified as directed.
M&L for preparation of surfaces plastered or unplastered new surface on wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care white putty complete all specified as directed.
M&L for removal of existing finish, scrapping and making good surfaces on old surface of walls and applying two coat of oil bound distemper over a coat of 1mm thick wall care white putty complete all specified as directed.
M&L for preparation of new surface including necessary scaffolding and applying finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primerapplied @ 2.20 kg/10 sqm) as per manufacturers instructions complete all specified as directed.
M&L for removal of existing finish and preparation of old plastered surface including necessary scaffolding and applying two coats of acrylic exterior paint over a coat of primer (brand apcolite Apex manufactured by Asian or Brand weather coat manufactured by Berger or equivalent as approved by GE) as per manufacturers instructions complete all specified as directed.
M&L for preparation of surfaces plastered or unplastered new surface on ceiling and applying three coats of white washing complete all specified as directed.
M&L for preparation of surfaces plastered or unplastered old surface on ceiling and applying one coat of white washing complete all specified as directed.
M&L for prepraration of new or previously untreated wood surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for applying one coats of synthetic enamel paint including preparation of old decorated wood surfaces of any description not other wise described over 10 cm with or girth complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in benching , surface channels and drains complete all as specified and directed.
M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms, molds mitred / stopped ends etc complete all as specified and directed. Note:- (1) Using Dimapur sand.
M&L for PCC 1:3:6 type C1 (using 20mm graded stone Agg) as in coping incl necessary formwork etccomplete all as specified and directed.
Demolition and breaking up 75mm/110mm dia drain pipes(salt glazed ware,AC ,PVC or reinforced concrete) set in cement mortar including concrete bedding and haunching complete all as specified and directed.
Taking down existing unserviceable treatment of any description including cement plaster any thickness from roof surfaces, cleaning of roof surfaces and preparing it for further treatment and removing rubbish from the site up to 50 mtrs complete all as specified and directed
Material only for applying one coat of bitumen primer conforming to IS-3384 @ 0.40 Kg/sqm complete all as specified and directed.
Labour only for applying one coat of bitumen primer on finished plastered surfaces complete all as specified and directed.
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laying on primed surface by forced application complete all as specified and directed.
M&L for applying two coat Aluminium paint over APP based polymeric membrane or Surfaces of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed.
M&L for 20-25mm thick PCC tiles using grey cement of size 250x250x20-22mm or 300x300x20-22mm ISI marked jointed etc. complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar (1:4) on other than fair faces of brickwork or concrete surfaces of wall finished even and fair without using extra cement and using WPC @ 2% by weight of cement or as per manufacture's instrs complete all as specified and directed. Note: (i) Plastering shall be carried out using Dimapur Sand. Note: (ii) WPC will be measured and paid separately
M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick set jointed with grey cement and pigments and pointed in neat cement slurry in floors including 15mm thick sreed bed in CM 1:4 complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soft/loose soil complete all as specified and as directed.
Removing excavated material/soil not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.
M&L for 40mm thick Damp proof course in cement concrete 1:2:4 type B0 with using WPC at the rate of 3% by weight of cement and using necessary formwork complete all as specified and as directed. Note: Integral water proofing compound shall be measured and paid separately.
M&L hardcore of gauge n exc 63mm, broken stone or boulders deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface completed all as specified and directed.
M&L for preparing new plastered surfaces of walls and applying three coats of colour wash over one coat of chalk white completed all as specified and directed.
M&L for preparation of new plastered surfaces applying two coats of cement base paint over a coat primer complete all as specified and directed.
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation,filling and mass concrete etc complete all as specified and directed
M&L for RCC 1:2:4 Type B1 nominal mix (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; basesfor columns, etc.; basement slabs, under-reamed piles and mass concrete vcomplete all as specified and directed.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished surface of concrete complete all as specified and directed.
M&L for RCC (Nominal Mix) type B1 1:2:4 (20mm graded aggregate ) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.(Sand :- Dimapur) Note :- Reinforcement and form work required shall be measured and paid seperately.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finised surface of concrete complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
Ditto as per item no 117.00 here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.70mm with 2mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed.
S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in square n. exe 0.50 sqm in each pane complete all as specified and directed.
S & F Pre painted galvalume aluminium zinc coating GI based semi corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as ridge, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F 0.63mm thick plain glavanised mild steel sheeting , on wall cladding and ridges , valley gutters , drips and straight flashing complete all as specified and direted.
M&L for preparation of new zinc (or galvanised) surfaces to receive painting by coating with mordant solulation including washing and cleaning etc and applying two coats of red roof paint over a coat of red oxide complete all as specified and direted.
S & F mild steel wire type-I gate and shutter, hooks and eyes 75mm complete all as specified and dirceted.
S&F floor door stopper of aluminum alloy body & tougues anodised with hard drawer steel spring fixed in floor of 150mm size complete all as specified and directed. .
S&F steel work in tubular or square trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to Fe 410-W (Gde-E-250 quality A) complete all as specified and directed.
S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sucnk) forming holes with any attachement Fe 410W (Gde-E-250) complete all as specified and directed.
S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc .Fe 410-gde -E250 quality-A complete all as specified and directed
M&L for applying two coats of synthetic enamel paint over a coat of red oxide including preparation of new or previously untreated steel surfaces of any description not other wise described over 10 cm with or girth complete all as specified and directed.
M&L for 2nd class hardwood weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and directed
Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified and as directed.
M&L for 50mm thick cement concrete type C2 1:3:6 (using 40mm graded aggregate) as in sub base complete all as specified and as directed.
Taking down carefully unserviceable aluminum/ copper point wiring (light/ fan/ socket/ power) complete including fixture & fitting such as switches, sockets, ceiling roses regulators, lamp holder etc. but excluding light fittings & fixture and exhaust fans etc removing and making good disturbed surfaces of wall/ceiling etc complete all as specified and directed.
Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated 1100 volts grade and unsheathed, multi-stranded, copper conductor single core cable through and including concealed wiring 20 mm pvc rigid conduit all fixing accessories and suitable including 1.6 mm thick size sunk MS pressed steel terminal modular box for mounting modular switches,sockets and regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) (a) One light point controlled by one, one way switch
One ceiling/exhaust fan point controlled by one, one way switch
One socket outlet 5 Amps 5 pin on independent board
One socket outlet 5 Amps 3 pin on same board with other switch
All as per item No. 133.00 here-in-above but with cable size 2.5 Sqmm for one 3 pin, 15 Amps socket outlet on independent board and multistrand insulator copper earth continuity conductor of size 2.5 Sqmm complete all as specified and directed.
Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) One light point controlled by one, one way switch
One socket outlet 5 Amps 5 pin on independent board
One socket outlet 5 Amps 5 pin on same board with other switches
All as per item No. 138.00 here-in-before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed.
S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed.
S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed.
S&F modular Switch Socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module complete all as specified and directed.
Supply and fixing modular Switch Socket 6/16 , 2/3 pin combined 2 module complete all as specified and directed.
S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.
S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed.
S&F modular white cover plate with frame for fixing of 12 module complete all as specified and directed.
S&F modular white cover plate with frame for fixing of 8 module complete all as specified and directed.
S&F modular white cover plate with frame for fixing of 6 module complete all as specified and directed.
S&F modular white cover plate with frame for fixing of 3 module complete all as specified and directed.
S&F modular white cover plate with frame for fixing of 2 module complete all as specified and directed.
S&F blank speacer plate for single module complete all as specified and directed.
S&F Modular step type regulator 12W, 2 module ,heavy duty, 240 volts complete all as specified and directed
Taking down old unserviceable main switch/ DBs/ MCB DBs with MCB including making good the disturbed surface complete as directed.
S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.
S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 4 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail single door verticle for breaking capacity 10 KA complete all as specified and directed.
S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F MCB single pole 06 to 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S & F sheet metal enclosures vertical DB (for DB's when MCCB/MCBs to be used ) Triple pole and neutral double door, IP - 54, 1 way, 415 volts with rated bus bar of size phase 200 Amp and neutral 300 Amps including MCCB 4 pole , 100 Amps, 16 KA all as specified and directed.
Taking down / dismantling old unserviceable LED tube light fittings any type keep safe custody in store complete all as specified and directed.
M&L for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendent/Angle type including one lamp complete all as specified and directed.
S&F LED tube light fitting 20 W LED 6500K bright linea high quality material and design surface and wall mounted LED robust and high performance batten LED luminar comprises of extruded channel in thermally conductive materail glare and smooth light complete all as specified and directed .
S&F PVC Board (30 x 25 x 5) cm depth medium quality ISI marked complete all as directed.
S & F LED light fitting 1x20 Watt , 220 V , AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S & F LED builidng security light fitting 25 Watt 230 V, AC out door type with hih pressure dia cast aluminium hosing and heat resistant complete with driver , lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Taking down ceiling/exhaust fan including dismantling all necessary electrical connections and kept in safe custody for refixing to its original position to facilitate repairs to ceiling/wall complete all as directed.
Refixing only ceiling fan (M D Supply) removed under item Srl No 33.00 here-in-above and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed.
Refixing exhaust fan removed under item Srl No 33.00 here-in-above and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed.
Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed. (Note: Earth strip beyond 7.5 m length will be measured & paid separately)
Taking down old unserviceable submain wiring any size complete all as specified and directed.
M & L for submain wiring with single core 6.0 sqmm PVC FRLS insulated unsheathed cable multi stranded copper conductor drawn through and inclduing PVC casing / capping of suitable size with all fittings and fixing accessories on roof , walls, ceiling etc including 4.00 Sqmm PVC insulated unsheathered one core multistranded copper condutor earth wire complete all as specified and directed. (Note : Two run of single core cable and one run earth wire will be measured as one length)
Taking down old unserviceable service cable including batten/suspending wires complete all as directed.
S & F of 1100 volts grade heavy duty cabled PVC insulated aluminium conductor served with inner sheating of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than one meter apart including 4 mm suspension wire one twin core cable 2 core flat of 10 sqmm size complete all as specified and directed.
M/s RS Enterprises & Supplier
MAURYA CONSTRUCTIONS
M/s Ritz Marketing
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .