Fabrication and errection of 6 number16 meter tubular pole with hexagonal cross arm and arrangement of it s controlling panel with fixing of 200 watt X 8 numbers departmentally supplied led lights in each pole along Fulbasiya siding line number 4 und

Amount

Erection of metallic pole of length above 10mtr andupto 12 mtr in cement concrete 1:3:6 (1 cement: 3coarse sand: 6 graded stone aggregate 40 mmnominal size) foundation including excavation andrefilling etc. as required.

Supply of 50 mm x50 mm x 6 mm angle & 16 mm2 plate & fabrication of same for hexagonal cross &base of pole like cutting,welding,drilling etc

Erection of ACSR conductor of 7/3.35 mm to 7/4.00diameter and above including binding etc. asrequired.for repairing and errection of 6 numbertubular pole

Supplying of channel iron 75 mm X 40 mm X 6 mm(7.14 kg per metre) cross arm for 4 wire over headline complete with clamps, bolts, nuts and washeretc including drilling of holes for insulator pins etc (asper drawing) and painting with primer and finishedpaint as required.

Erection of angle Iron/channel iron cross arm onwood/RCC/PCC/steel tubular or Rail pole for 4 wiresystem.

Supplying and erection of 100 mm X 80 mm pininsulator complete with G. I. Spindle and nuts etc. asrequired.

Supplying and erection of 100 mm X 110 mm shackle7 insulator with G. I. Bolt, nuts and straps etc. asrequired

Supplying and erection of stay set complete(galvanised) with 19/20 mm dia X 1.8 metres longstay rod, anchor plate of size 45 cm X 45 cm X 7.5mm, thimble, stay clamps, bow tightener, 7/3.15mm dia G.I. stay wire and strain insulator etc incement concrete 1:3:6 (1 cement: 3 coarse sand: 6graded stone aggregate 40 mm nominal size)foundation including excavation and refilling etc. asrequired.

Supplying and drawing following sizes of FRLS PVCinsulated copper conductor, single core cable in theexisting surface/recessed steel/PVC conduit asrequired 2 x 6 Sq.mm

Supply & fixing of Single phase copper lightningArrester

Earthing with copper earth plate 600 mm X 600 mm X 3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required. Forearthing of 16 meter pole in continuation with lightning arrester.

Providing and making steel pole collar with cement concrete (1.cement: 3 coarse sand: 6 stone aggregate 20 mm) of specified size and shape12 including form work, plastering if required,curing etc as required. (volume of pole/ pipe not to bededucted)Nos of poles 6,collar size(0.6 X 0.6 X 0.8 M = 0.288 CUM/Pole

Cutting of 6" dia damaged or spare pipe in suitable 3 meter size by gas / electric welding M/C, (3x51.75=155.25) for 6 meter 6" inch dia pipe jointing.

Welding of 6" dia pipe to pipe for jointing by 14 gas/electric welding M/C, (6x51.75 =310.5) for 6 meter 6" inch dia pipe jointing.

XLPE Aluminium Armoured 4 core 16 Sq.mm CABLE15 650/1100 v,Grade confirming to IS: 7098 (Part-1)1988

Laying of one number PVC insulated and PVCsheathed / XLPE power cable of size not exceeding35 sqmm direct in ground including excavation, sand16 cushioning, protective covering and refilling thetrench etc. As required

Supplying and fixing following way, single pole andneutral, sheet steel, MCBdistr.bution board, 240volts, on surface/ recess, complete with tinnedacopper busbar, neutral bus bar, earth bar, din bar,17interconnections, powder painted including earthingetc. as required. (But without MCB/RCCB/Isolator)6way, for Junctioning of cables from Led Lights tomain Distribution MCCB box

Sheet Steel Enclosure For MCCBs in IP30 Protection, With Louvers for better Heat Dissipation, Inbuilt Neutral Link,size suitable for 160 A to 250 A MCCBS, 50 Ka

100 Ampere Mccb with Thermal Magnetic Release, High Electrical & Mechanical Life,ON-TRjp. OFF indication,Suitable for Isolation,Conforms toIS/IEC 60947-2,IEC 60947-2 & EN 60947-2

Residual current circuit Breaker 63 Ampere 4 pole,30 milli Amp,Suitable for AC+ Pulsating DC/Type A)+Harmonics

4 pole Isolators 63 A Conforms to lEC 60947-3

Fixing Charge of item number (18 to 21)at 15% ofmaterial cost.

Total impact of GST for the purpose of CTC

M/s KASHYAP ENTERPRISE