Construction of Building of New I.T.I at Khera (Siwani) in Distt. Bhiwani (Pdg. Power Wiring only).

Amount

1: - Molded case Circuit breakers: Supply and erection of molded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections.(HSR 31.12 (C). i) 15 amp. to 63amp. 415 V ,10 KA 3-phase.

: - ii) 100 amp.to 220 amp.415 V,10 KA 3-phase.

: - vi) 250 amp 415 Volt 35 KA 3 Phase

2: - Sheet steel enclosures: Supply and erection of sheet steel enclosures distribution boards suitable for MCBs etc. on wall/existing boards / pedestal with rag bolts including bonding to earth. (HSR 31.12 (D) iii) SPN Distribution board 4-way.

3: - Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. (HSR 31.13). ii) Size 40 mm x 40 mm x 6 mm

4: - M.S.Sheet (HSR 31.14) i) Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

5: - Miniature Circuit Breaker and Isolator: Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. (HSR 31.17) Miniature circuit breakers of 9 KA breaking capacity. vi) TPN MCB 6 amp. to 32 amp.

: - x) TPN MCB 40 amp. to 63 amp.

6: - (Q) Earthing (HSR 31.22) iv) Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

: - v) Extra for charcoal or coke and salt for GI. Plate or copper plate earth electrode.

: - xiv) Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material.

7: - Supply and erection of underground cable ,loose in existing pipe or trenches complete with necessary connections. (HSR 31.26) xxvi) 35 Sq. mm 3.5 Core Ard. Cable.

: - xxviii) 70 Sq. mm 3.5 Core Ard. Cable.

: - xxxiv) 300 Sq. mm 3.5 Core Ard. Cable.

: - xl) 16 Sq. mm 4 Core Ard. Cable.

8: - Supply and erection of suitable compression type brass cable glands for underground Cable. (HSR 31.28) ii) 10 Sqmm to 16 Sqmm Cable 2 to 4 Core .

: - iii) 25 Sqmm to 50 Sqmm Cable 2 to 4 Core.

: - iv) 70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core .

: - vii) 300 Sq mm to 400 Sqmm Cable 3 to 3.5 Core .

9: - Supply and erection of MS stand made of 50mmx50mmx6mm angle iron frame and 150cm long, 30cm wide with MS sheet covering size 30cmx30cm 3.15mm thick fixed on the top of board & legs duly embedded in 1:2:4 cement concrete block 30cm below ground level including cost of cement sand welding, painting & fabrication charges etc upto the entire satisfaction of Engineer-in-Charge of the work. (HSR 31.51)

10: - Supply and fixing of rotary handle for on/off operation of existing MCCBs in the L.T panel including fixing the same in position with all labour and material required to complete the job in all respect. (HSR 31.66). ii) Rotary handle above 125 A MCCB

12: - Supply & erection of factory manufactureed cable tray cover made of 16g GI Sheet complete with Fastoner Nuts bots and in position including all petty material required to complete the Job in all respect upto the Entire statisfaction of Engineer-in-Charge of the work. (HSR 31.82). i) Size for 40 x 100 mm

: - ii) Size for 50 x 150 mm

: - iii) Size for 50 x 300 mm

13: - Non Schedule items Supply & erection of MCCB Box suitable for upto 100 amp MCCB of Havell's make complete with all accessories complete in all respect upto to the entire satisfaction of the Engineer-in Charge of the work.

M/s JSB Enterprises

J.B.S.Electrical Co.