Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.2 LAccepted-AOC 1010 NANDANPURA BABINA CANTT DIST JHANSI 284401 | BABINA CANTT | JHANSI | UTTAR PRADESH | 284401 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹23.0 L+₹6.7 L (41.5%)Rejected-AOC NEAR PUMP HOUSE ROAD NEAR RED ROSE SCHOOL BABINA CANTT JHANSI DISTT UP 284401 | JHANSI | UTTAR PRADESH | 284001 | L2 | Rejected-AOC Rejected |
Tender Value
₹25.8 L
EMD Value
₹51,500
Closing Date
15 Dec 2022, 6:00 pmClosed
CWE JHANSI
HQ CWE JHANSI
SPL REPAIR TO 100 MTR ROAD DRONA TO JCOs MESS, ZONE-06 AND 200 MTRS ROAD OFFRS MESS GUEST ROOM TO OFFRS MESS REAR GATE ZONE-11 AND PROVN OF BLACK TOP ROAD CONNECTING GARAGE OF BDE UNDER GE BABINA
2022_MES_563649_1
CWE/JHA/BAB/TOKEN/55 OF 2022-23
Open Tender
Civil Works - Roads
Item Rate
180 days
BABINA
As per tender documents
9 documents required · 9 mandatory
₹500
GE BABINA
₹51,500
Yes
20 Jan 2023
17 Nov 2022
21 Dec 2022
17 Nov 2022
15 Dec 2022
3 Dec 2022
Amount
M&L, Scarifying or picking graveled macadam or bituminous macadam surface in area n.exc 400 Sqm and depth n.exc 75 mm deep and removing n.exc 50 mtr and complete all as specified and directed.
M&L,7.5cm thick (compacted thickness) WBM with coarse aggregate of granite, trap or basalt grading 2(63 to 40mm) or of grading 3(50 to 20mm) spread, rolled and consolidated to gradient material and camber required with 8 to 12 tonne power roller complete all as specified and directed.
All as per item No 2 but except material (Material obtained from Sl No 01 shall be used) complete all as specified and directed.
M&L, Preparing unsurfaced WBM by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally faning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.
M&L, applying evenly a tack coat of bitumnous primer at 10 Kg per 10 Sqm with using bitumen VG-10 and M&L for providing bituminious premix asphaltic semi dense concrete (40mm thick) consolidated thickness with 5.5% binder content by wight of total mix , with using paving bitumen VG-30 laid / spread uniformly by means of pavers over primed WBM surfaces, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and directed.
M&L for preparing old black top surface of road by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning to cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming / tack coat @ 5 kg per 10 sq m with using paving bitumen VG-10 and M&L for providing bituminious premix asphaltic semi dense concrete (30mm thick) consolidated thickness with 5.5% binder content by wight of total mix , with using paving bitumen VG-30 laid / spread uniformly by means of pavers over primed black top surfaces, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and directed.
M&L for premix bituminous macadam laid / rolled and compacted to required gradient and hcamber and (consolidated thickness 75mm or less) using 4% paving bitumen by weight or total mix complete all as specified and directed.
M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n.exc 10cm wide on roads pavements with hot allied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.
Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.
S&F for solar delineator size 1000x47mm is made of polycarbonate and toughened aluminium alloy body and height 145mm, dia 80mm comprises of 4 super bright LEDs which give 360 degree viewing incl solar panel 2.5V, 120mm (approx) 1.25V rechargeable battery - 1 No incl surface dressing and PCC 1:2:4 using 12.5mm graded aggregate complete all as specified and directed.
S&F sand stone patties in edging of rough squared stones of size 50mm thick, 300mm depth and 60cm long each pattie, length of stone patti shall be laid parallel to the road length, jointed struck flush including necessary excavation, earthwork, returning filling and removal complete all as specified and directed.
Demolition of PCC in any description and in any position etc complete all as specified at site complete all as specified and directed.
M&L for PCC 1:4:8 type D2 using 40 mm gdd stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
M&L 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in sub floor, sub base, floor paving etc complete all as specified and as directed.
M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L 80 mm thickness M-40 Grade,machine pressed precast concrete Inter locking paver blocksany shape & size with grey cement and pigment conf to IS-15658-2006 laid dry over sand cushion complete all as specified and directed. (Sand cushion shall be measured and paid separately)
M&L moorum/red bajri for berms including spreading, levelling, watering and complete all as specified and directed.
Rolling and consolidating formation surfaces in cutting with power roller exceeding 8 Tonne and not exceeding 12 Tonne capacity to required camber and gradient complete all as specified and directed.
Suface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose of soil complete all as specified and directed.
M & L for soling (or sub base) 150mm thick (spread thickness) with broken boulders or quarried stone broken to size ranging 100mm to 50mm inter stices fitted surfaces formed and rolled and consolidated to reqd gradient and comber with 8 to 12 tonne including Rolling & consolidating formation surfaces in cutting/filling with 8 to 12 tonne power roller complete all as specified and directed.
M&L,15cm thick (compacted thickness) WBM with coarse aggregate of limestone, sand stone grading 2 (63 to 40mm) or of grading 3 (50 to 20mm) spread, rolled and consolidated to gradient material and camber required with 8 to 12 tonne power roller complete all as specified and directed.
M/S Ritu Tandon
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .