Providing additional 3rd 5 MVA, 33/11kV power transformer at 33/11kV sub-station Tadavalaga in Indi Taluk, Vijayapur District in 33KV S&L Division Vijaypur on PTK basis (5 MVA Power Transformer will be supplied by departmentally)

Tender Capacity Format

Details of work Executed during last 05 years ( To asses the value of A)

Sl No Year Work Executed Other related Electrical Works if any Cost of executed work in Rs Lakhs

New substations / Augmentation in Nos HT line in Rkms(11KV & above) DTC in Nos

Details of existing commitments and on-going works to be completed during next '13 months ( To asses the value of B) Attached in the next sheet

SL No Details of On Going works Award amount Rs in Lakhs Amount of work to be completed during next "13 months" Rs in Lakhs Completion period as per award Completion period remaining

Tender Capacity Formula= A*N*1.5-B

Where 'N'=13months of completion period for above subject work

Seal and signature of the Bidder

A= Maximum value of Distribution network work executed in any one year during the last 5 years i.e 2020-21,2021-22 ,2022-23,2023-24,2024-25 ( UP dated to __________________ price level) taking into account the completed as well as works in progress

N= Number of years/months prescribed for completion of the works for which Tenders are invited

B= Value,at________price level, of existing commitments and on-going works to be completed during the 'N'

Note: 1) The available tender capacity shall be more than the total tender value 2) Documentary Proof in support of value ‘A’, the Total value of works executed and payments received annually in the last 5 years shall be uploaded in the form of certificates issued by Chartered Accountant. In case if the same is not uploaded, then the maximum value of annual payments received towards the works executed which is indicated in the audited balance sheet in any one year during the last five years will be considered.

Tender Capacity Format

Details of existing commitments and on-going works to be completed during next "13 months ( To asses the value of B)

SL No Details of On Going works Award amount Rs in Lakhs Amount of work to be completed during next "13 months" Rs in Lakhs Completion period as per award Completion period remaining

Where 'N'= 13 months of completion period for above subject work

Note: The statement showing the value of existing commitments and ongoing works as well as the stipulated period of completion remaining for each of the works listed shall be countersigned by the Employer in charge, not below the rank of Executive Engineer or equivalent.( Note: L-1 in any of the recently called tender amount is also be considered as value of B along with the above)

Seal and signature of the Executive Engineer(Ele)

HUBLI ELECTRICITY SUPPLY COMPANY LIMITED

Self-Declaration statement of Bidder/Contractor for works Done…as on date of Bid submission.

Note: Please fill all required data and upload the signed copy in e-procurrement portal.

Bid Indent No: HESCOM/2025-26/EL/WORK_INDENT1109 Format-I

Work done certificate details as per QR.

Sl.No. Year of Completion Name of the Department Work Done Certificate No.& Date. Work Done Certificate issued by (Executive Engineer, Superintending Engineer .,.etc.,) Station voltage Class (220kV, 110kV, 66kV, 33kV) Station Capacity (MVA) 33 KV Line in R.Kms 33KV ROC in R.Kms 11 KV & above in R.Kms Others Cost of the work/project Rs.in Lakhs

Note:Works completed during the period from (i.e.,2019-20, 2020-21,2021-22,2022-23 and 2023-24) shall only be furnished, others will not be accepted.

I/We hereby declare that I/We had carried out above works and completed in all respects and are in successful operation for the last 1 (One) year i.e.,as on date of Bid submission. Further notice for defects in executed works is not received from concerned Department/recieved and same have been attended within the time. Any information, if found to be incorrect, wrong, misleading or misrepresenting , I/We am/are aware that I/We may be held liable for it.

HUBLI ELECTRICITY SUPPLY COMPANY LIMITED

Estimate for Providing additional 3rd 5 MVA, 33/11kV power transformer at 33/11kV sub-station Tadavalaga in Indi Taluk, Vijayapur District in 33KV S&L Division Vijaypur on PTK basis (5 MVA Power Transformer will be supplied by departmentally).

Sl. No Particulars Material Labour Civil Total

1 Materials cost (Exclusive of GST) 9261049.91 9261049.91

2 Labour charges+ Decommissioning (Exclusive of GST) 598855.79 598855.79

3 Civil Engineering Charges (Exclusive of GST) 3145566.98 3145566.98

5 Area Specific Loading @ 3% on SI No 4 0 0 0 0.00

7 Cost of the Estimate /APT (Without GST) 9261049.91 598855.79 3145566.98 13005472.69 12372521.449

% age of tender compenents included

Executive Engineer (EL), Superintending Enginner (El),

Projects - 1 , HESCOM, Hubli PMC, HESCOM, Hubli

HUBLI ELECTRICITY SUPPLY COMPANY LIMITED

Estimate for Providing additional 3rd 5 MVA, 33/11kV power transformer at 33/11kV sub-station Tadavalaga in Indi Taluk, Vijayapur District in 33KV S&L Division Vijaypur on PTK basis (5 MVA Power Transformer will be supplied by departmentally).

Part : A Electrical S/S Portion

Sl. No. Particulars Unit Qty Unit rate Total Material Cost in Rs.

1 Power Transformers:

33/11KV, 5MVA, DELT/STAR, DY 11, 3Ph, 50Hz,Core type winding with OLTC, panel etc., complete filled with Transil Oil and 10% spare Oil in Non Returnable Drums. As per HSCR-2021-22, Sl.No:1 Item No:1.1. (Supplied Departmentally) Nos 0 8381013.60 0.00 6284178 CommonSR2023-24 Schedule of Rate for Standard Stock Materials in Common SR 2023-24 (33kV System) Sl No:02, Item No:1.02 Page No:99

2 33KV SF-6/ VCB Breakers: 0.00 CommonSR2023-24 PART-I: Rates for Major Works Materials/Equipment Sl No/Item No:3.5 Page No:99

66 kV, 40 kA class, SF-6 Circuit Breaker with terminal connector suitable for Al. tube/conductor with spring/semi-pneumatic/pneumatic type operating mechanism and mounting structure etc., as per technical specification. Nos 1 730000 730000.00

3 33 KV Current Transformers 0.00 CommonSR2023-24 PART-I: Rates for Major Works Materials/Equipment Sl No/Item No:5.2.14 Page No:103

a) 33 kV Class : -200-100/1-1-1 A Oil filled Current Transformer 0.2s class with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technical specification. Nos 3 45000 135000.00

b) 11 kV NCT : 600-300/1-1-1 A Oil filled Current Transformer 0.2s class with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technical specification. Nos 1 50000.00 50000.00

4 33 KV Isolators : 0.00 CommonSR2023-24 PART-I: Rates for Major Works Materials/Equipment Sl No/Item No:9.14.2 Page No:109

a) 33 kV, 800 A, 25 kA Isolators, double break with manual operating mechanism, with solid core insulator, terminal connector suitable for Al. tube/Coyote ACSR conductor, marshalling box etc., complete as per technical specification Upright without Earth Switch (Live Point Height 4750 mm) Set 2 95590.00 191180.00 CommonSR2023-24 PART-I: Rates for Major Works Materials/Equipment Sl No/Item No:9.14.3 Page No:109

5 11kV Announciator Panels 0.00

a) 11kV Annunciator Panel for the following combinations (for both MCVCB & PCVCB), 2I/c + 10F + 1BC Panel 1.00 314083.00 314083.00

6 11 KV Isolators 400A with manually operated isolators with Pad connectors suitable for Lynx ACSR Conductor, as per technical specification with cylindrical post insulators 0.00 Schedule Of Rate For Standard Stock Material in Common SR 2023-24 (11kV System)

a) 11 kV, 400 Amps Special Roaster GOS Set 4 15005.00 60020.00 (11kV System) Sl No:169, Item No;24.04, Page No:441

b) 11 kV, 400 Amps Double Break with H Fram for mounting structure GOS (Dwg No. BESCOM/GM/QS&S/22 Dtd 24.11.2018) Two extra for bus coupler set 10 23135.00 231350.00

c) Earth Bond 300 mm Long Nos 16 469.00 7504.00

7 Surge Arrestors, Metal Oxide, as per Technical Specification. 0.00 CommonSR2023-24 PART-I: Rates for Major Works Materials/Equipment Sl No/Item No:8.7 Page No:106

a) 30 kV Metal Oxide with surge counter Arrestor class : Discharge Class 2 (Station Low Duty (SL)) - for Overhead Line Nos 3 11918.00 35754.00

b) 9 KV class, 10KA Metal Oxide type As per HSCR-2021-22, for General works, Pg No:4 of 4, Sl.N: XXXIII (a) Nos 18 1786.00 32148.00 CommonSR2023-24 Standard Stock Material in Common SR 2023-24 (11kV System) Sl No:138, Item No:19.02 Page No:106

8 Fabrication, Galvinisation and Supply of Station Structures: I beam for 33kV ODS As per KPTCL SR-Part-I, Sl.No:.3.1 MT 3 124000.00 372000.00 CommonSR 3rdQtr2023-24 Sl No/Item No:15 Page No:4

9 11KV ODS: 0.00

Beam out of Channel 100 x 50 with arrangements for stringing power conductor on 11 kV side 0.00

b) 1B2 4.00 metre Long (0.038 MT/length x1,35,520/-)= 5149.76 2 No's of extra provision for Bus coupler Nos 16 4712.00 75392.00 5149.76 3328.3255 0.0092

c) RCC Pole - 9.5 M Long, 300 Kg WL for 33kV & 11kV ODS. Nos 16 12018.00 192288.00 CommonSR2023-24 Page No:339 838.9204

d) RCC Pole - 9 M Long, 145 Kg WL for out going GOS DP. Nos 10 7531.20 75312.00 CommonSR2023-24 Page No:339

d) RCC Pole - 8 M Long, 115 Kg WL for Street light. Nos 4 5647.20 22588.80 CommonSR2023-24 Page No:339 680kg 750Ltr

d) D P Structure with hardware consisting of duble X arms, horizontal cross braces, crossbraces etc for 11KV. As per HSCR-2021-22, Pg No:8 of 27, Sl.N:194 Item No: 26.01 Set 4 8700.00 34800.00 600

e) 11kV H-Frame for mounting GOS for 400 A Double Break GOS. Set 4 4296.20 17184.79 CommonSR2023-24 Page No:412

10 Mounting structures for equipment made out of fabricated galvanised angle iron for GOS / CT's / PT's / LA's / NCT / HI PI etc as per approved drawing including the weight of Nut & Bolt 0.00 CommonSR2023-24 STATION STRUCTURES AND MOUNTING STRUCTURES

a) 33kV Isolator Mounting Structure - 0.257 MT Nos 2 31868.00 63736.00 CommonSR2023-24 STATION STRUCTURES AND MOUNTING STRUCTURES Sl No: II E v 9

b) 33kV CT Mounting Structure - 0.093 MT Nos 3 11532.00 34596.00 CommonSR2023-24 STATION STRUCTURES AND MOUNTING STRUCTURES Sl No: II E i 107600.66 21884.88 4.06

c) 33kV LA Mounting Structure - 0.087 MT Nos 6 10788.00 64728.00 CommonSR2023-24 STATION STRUCTURES AND MOUNTING STRUCTURES Sl No: II E iii 6383.09

d) 33kV PI Mounting Structure - 0.087 MT Nos 6 10788.00 64728.00 CommonSR2023-24 STATION STRUCTURES AND MOUNTING STRUCTURES Sl No: II E iv 6383.09

e) 11kV NCT Mounting Structure - 0.157 MT Nos 1 19468.00 19468.00 CommonSR2023-24 STATION STRUCTURES AND MOUNTING STRUCTURES Sl No: II C viii 12948.554 3.045

f) For High Pedestal Insulator 33 kV (with bolted type foundation) - 0.231 MT Nos 6 28644.00 171864.00 CommonSR2023-24 STATION STRUCTURES AND MOUNTING STRUCTURES Sl No: II E vii 12948.554

g) For High Pedestal Insulator 11 kV (with bolted type foundation) Nos 3 28644.00 85932.00 CommonSR2023-24 STATION STRUCTURES AND MOUNTING STRUCTURES Sl No: II E viii

h) S.M. Rail and M.S. angle iron for Transformer plinth ( 2 nos. of 3m long) SM rail and 65x65x6 mm angle iron 8mtr long 0.2 MT each. Set 1 10000.00 10000.00

11 Conductors 0.00 CommonSR 3rdQtr2023-24

a) Coyote ACSR (26/2.54 mm Al + 7/1.90 mm St), Std Wt: 521 Kg/KM As per HSCR-2021-22, Pg No:3 of 27, Sl.N:62, Item No: 7.03 km 0.6 155000.00 93000.00 Sl No: 24

b) Lynx Conductor, As per KPTCL SR-Part-I, Sl.No:8.2 km 0.4 213000.00 85200.00 Sl No: 23

12 Insulators and Hardware 0.00 4305

a) 33kV 70 KN Polymer Insulator (Ball & socket type) Nos. 130 519 67470.00 CommonSR2023-24 (33kV System) SL No 12 Item No 6.03 page no 499

b) Solid Core Bus Post Insulator 33 kV Nos 6 3663 21978.00 CommonSR2023-24 Rates for Major Works Materials/Equipment Sl No 21 Item No 21.4.5 page No:117

c) 33kV Polymer Pin Insulator Nos 9 854.40 7689.60 CommonSR2023-24 (33kV System) SL No 12 Item No 6.04 page no 499 3700

d) Bolted Type Tension Clamp Single Coyote ACSR Conductor 70/90 kN, 16 mm Nos 130 1394.00 181220.00 CommonSR2023-24 Rates for Major Works Materials/Equipment Sl No 47 Item No 47.1.11 page No:140

f) T Clamps for Coyote to Coyote As per KPTCL SR-Part-I, Sl.No:13.8.11 Nos 24 576 13824.00 CommonSR2023-24 Rates for Major Works Materials/Equipment Sl No 47 Item No 47.7.11 page No:141

g) T Clamps for Lynx to Lynx As per KPTCL SR-Part-I, Sl.No:13.8.8 Nos 6 606 3636.00 CommonSR2023-24 Rates for Major Works Materials/Equipment Sl No 47 Item No 47.7.8 page No:141

h) T Clamps for Lynx to Coyote As per KPTCL SR-Part-I, Sl.No:13.8.10 Nos 15 606 9090.00

i) Post Insulator Clamps Single Coyote ACSR Conductor 127/76 mm, 66/33 kV Nos 6 991 5946.00 CommonSR2023-24 Rates for Major Works Materials/Equipment Sl No 45 Item No 45.5.7 page No:141

j) Power Connectors, Terminal Connector Clamps for ACSR Conductor Single Coyote Nos 6 836.00 5016.00 CommonSR2023-24 Rates for Major Works Materials/Equipment Item No 47.8.4 page No:142

k) Eye Bolts No 100 102.00 10200.00

13 a) LTAC Panel (Indoor), 415 V as per technical specification comprising of voltmeter and ammeter, 1 I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU, + 2 nos. 3 Phase 32A O/G SFU 100A + 14 O/G SFU, 6 nos. 3 Phase 16A SFU etc., complete as per technical specification. Nos 1 85910.00 85910.00 CommonSR2023-24 Rates for Major Works Materials/Equipment Item No 11.2.2 page No:111

b) DC Distribution Panel (Indoor) as per technical specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete as per technical specification. Nos 1 52030.00 52030.00 CommonSR2023-24 Rates for Major Works Materials/Equipment Item No 11.2.3 page No:111

14 11KV Kiosks 0.00

11KV, 350MVA, 800A outdoor type Kiosks comprising of 1I+4F+1CB+1AP3 PCVCBs with mounting structures, terminal connectors for Lynx, etc.complete. As per KPTCL SR-Part-I, Sl.No:1.2.2.1(a)(b)(c) &1.2.2.6(d) Set 1 3603856.00 3603856.00

15 Control and relay panels Simplex type as per technical specifications (Control Voltage 110V DC) 5MVA, 33/11KV Transformer Panel. As per KPTCL SR-Part-I, Sl.No:2.3.12. Set 1 648560.00 648560.00

16 COPPER Control Cable with Accessories: (With glands/lugs/ferruels) 0.00

b) 14 core 2.5 Sq.mm. As per KPTCL SR-Part-I, Sl.No:1.12.15 Mtrs 0 461.00 0.00

c) 4 Core 6 Sq.mm. As per KPTCL SR-Part-I, Sl.No:1.12.8 Mtrs 300 247.00 74100.00

d) 4 core 2.5 Sq.mm. As per KPTCL SR-Part-I, Sl.No:1.12.6 Mtrs 200 153.00 30600.00

e) 2 core 2.5 Sq.mm. As per KPTCL SR-Part-I, Sl.No:1.12.1 Mtrs 600 99.00 59400.00

17 A16 11 kV, 3 Core, XPLE HTUG Cable 0.00

1 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 120 Sqmm, (57 GI Wires - 2.5 mm Dia). 400 Sqmm,. 24,96,468 Km 0.1 2990892 299089.20

2 Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable, 3x400 Sqmm set 4 5591 22363.20

18 Providing, laying and jointing PVC pipes conforming to IS 4085-1960 and approved makes with necessary specials such as collars, bends, elbows, Tee, Nipples, plugs etc., complete, whereever necessary as per the directions of the Field Engineer. 0.00

a) i) 63 mm dia (outer), 2 to 2.5 mm thick, As per HESCOM SR, SI NO:389, Item No:48.06 Mtrs 200 136.00 27200.00

b) ii) 75 mm dia (outer), 2 to 2.5 mm thick, As per HESCOM SR, SI NO:389, Item No:48.06 Mtrs 200 160.00 32000.00

19 Supply & Erection 0.00

a) Danger Boards. As per HSCR-2021-22, Sl.No:660 Item No:67.20 Nos 12 157 1886.40

b) Phase Plates Nos 20 528.00 10560.00

c) Name plates for equipments Nos 20 318.00 6360.00

d) Name plates for feeders and bank Nos 15 318.00 4770.00

20 a) Station yard lighting/Street light (outdoor): including Civil works complete: Supply of LED Streetlight with pressure die cast aluminium housing body with optimal heat sink for better thermal dissipation. Diffuser with Injection moulded & is made of polycarbonate material with high transmission index, delivering superior light output. Rated life Burning Hrs 50000 hr & Lumen Mainanance of 70%. CCT > 5500K, IP 66 optiical and electrical compartment & impact resistance of complete luminare > IK08. Power Factor > 0.9 with mains Current should not be greater than 0.1A to 0.7A & Surge Protection - Min 4KV along with over Voltage / Overload, short circuit / miswiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60 Hz application. Overload & Short circuit protection ensures reliable operation in spite of problem in output side. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence tiwh RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintananceat the sight location with minimized minimal tools. LED light fixture with 65 W System Power Consumption. LED Efficiency>130lm/w at 1W & Fixture Efficiency > 80lm/w with nominal CRI . 75. LImunaire manufacturer should have in-house facilitty accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing / Body part. warranty of 5 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED source manufacture. Suitable for B1/B2 Roads as per IS 1944 PArt I & part II. and Supplying and fixing of 40 mm dia class A GI pipe bracket upto 2 mtrs long bent at suitable angle and fixing to this bracket 1x40/2x40 watts fluorescent tube street light fitting of all capacities to GI or CI or rail or RCC pole / wall using suitable clamps, bolts, nuts and wiring using suitable capacity wires. Using 40/50 mm dia GI pipe(As per KPWD SR-2014-15, Page No,108, Sl No, 17.1.1) Nos 4 8860.00 35440.00

b) 2 core , 6 Sq. mm, 1.1KV class armoured Al. Cable including PVC pipes, for Yard Lighting complete. Mtrs 150 155 23206.92

c) Metal, Clad DP Switch for Yard Lighting complete. Nos. 4 715.00 2860.00

d) ICDP 250X30 Amps for Yard Lighting complete. HESCOM SR, SI.No:134, Item No: 15.01 Nos. 1 0.00

21 Fire fighting equipments with necessary mounting stand: 0.00

a) Foam type extinguisher(Mech) 9.00 Ltr. Capacity. (MW SR 17.01.2) Nos 4 4118.00 16472.00

b) Carbon dioxide type 4.5 Kg/6 Litr. Capacity (MW SR-17.3.1) Nos 6 8691.00 52146.00

c) G.I Bucket 9 Ltr. Capacity. (MW SR- 17.5.1) Nos 6 603.00 3618.00

d) Steel Mounting stand for above buckets.(Each stand for 3 buckets) (MW SR 17.5.2) Nos 2 2362.00 4724.00

Total 9261049.91

HUBLI ELECTRICITY SUPPLY COMPANY LIMITED

Estimate for Providing additional 3rd 5 MVA, 33/11kV power transformer at 33/11kV sub-station Tadavalaga in Indi Taluk, Vijayapur District in 33KV S&L Division Vijaypur on PTK basis (5 MVA Power Transformer will be supplied by departmentally).

Sl No Description of work Unit Qty Labour Portion

Unit Rate Amount

1 ERRECTION OF POWER TRANSFORMERS CommonSR2023-24Volume-6(KPTCL,ESCOMs&PWDEle) Rates for Labour of Major Works SL No:9 to 11 Page o.190

a)Moving the Transformer to the plinth. Maximum allowable distance is 50 metre (More than 50 metre, approval of D(T) has to be obtained) (15MTX30Mtrs=450 MT/Mtr) Mt/mtr 450 80.00 36000.00 450

b) i) Assembly of 5 MVA. Power transformers parts like bushing, radiators, conservators, tank, filling oil into transformer for total weight of the transformer. As per MW SR, Part-II- Pg No:12, Si.No:14.b.i MT 15 1134.00 17010.00

ii) Filtration of oil using filter set of the contactor to bring the insulation value to IE specifications. As per MW SR, Part-II- Pg No:12, Si.No:14.b.iii Ltr 4000 7.00 28000.00

C) Wiring of transformer marshalling box, Bucholtz relay, fixing thermometer, OLTC upto control panel and assisting in testing and commissioning by RT/MT/firm Engineers. As per MW SR, Part-II- Pg No:12, Si.No:14.c.i. LS 1 6708.00 6708.00

d)Fabrication of Transformer railing and embedding in Transformer plinth. (Rails to be supplied by the HESCOM) As per MW SR, Part-II- Pg No:12, Si.No:15 LS 1 1626.00 1626.00 0.00 0.00 0.00

2 ERECTION OF CIRCUIT BREAKERS 0.00

a)Erection, assembly, alignment and inter pole wiring of breakers with its inter connected equipments including movement from the point of unloading to the point of erection i) 66kV OR 33KV Circuit Breakers. Per Set 1 5934.00 5934.00 CommonSR2023-24Volume-6(KPTCL,ESCOMs&PWDEle) Rates for Labour of Major Works SL No:13 Page o.191

Assisting in testing and commissioningi) 33KV Circuit Breakers. Per Set 1 1938.00 1938.00 CommonSR2023-24Volume-6(KPTCL,ESCOMs&PWDEle) Rates for Labour of Major Works SL No:13 b Page No.191 8737010

3 ERECTION OF 33KV CT's 0.00 9361082

a) Erection of CTs and wiring including movement from the point of unloading to the point of erection. Set 1 2199.00 2199.00 CommonSR2023-24Volume-6(KPTCL,ESCOMs&PWDEle) Rates for Labour of Major Works SL No:14 a Page No.192 7.142855508

b) Assisting in Testing and Commissioning i) 33KV CTs As per MW SR, Part-II- Pg No:12, Si.No: 19.b. Set 1 768.00 768.00 CommonSR2023-24Volume-6(KPTCL,ESCOMs&PWDEle) Rates for Labour of Major Works SL No:14 b Page No.192 9173860.5

4 Erection of NCT 0.00 187221.5

a) Erection of NCT with grounding connections including movement from point of unloading to the point of erection. Set 1 733.00 733.00 CommonSR2023-24Volume-6(KPTCL,ESCOMs&PWDEle) Rates for Labour of Major Works SL No:15 a Page No.192 9261230.6

b) Assisting in Testing and Commissioning. Set 1 99.00 99.00 CommonSR2023-24Volume-6(KPTCL,ESCOMs&PWDEle) Rates for Labour of Major Works SL No:15 b Page No.192 99851.4

5 Erection of Isolators 0.00 9304915.65

a) Assembly, Erection, Alignment and wiring including movement from point of unloading to the point of erection i) 33KV Class Upright isolators. Set 2 1319.00 2638.00 CommonSR2023-24Volume-6(KPTCL,ESCOMs&PWDEle) Rates for Labour of Major Works SL No:17 A i Page No.193 56166.35

b)Assisting in Testing and Commissioning Set 2 191.00 382.00 CommonSR2023-24Volume-6(KPTCL,ESCOMs&PWDEle) Rates for Labour of Major Works SL No:17 E I Page No.193

ii) 11KV Class isolators (11kV 400 Amps Special Roaster GOS-4 N's + 11kV, 400 Amps Double Break GOS-5 No's) Set 14 1298.40 18177.60 CommonSR2023-24Volume-6(KPTCL,ESCOMs&PWDEle) COST DATA SHEET - 15 page 361

Earth Bonds Copper - GOS handle 300 mm long Nos 16 469.00 7504.00

6 33kV ODS 0.00

Station structures for 33kV ODS . As per MW SR, Part-II- Pg No:12, Si.No: 13.b.. MT 3 2400.00 7200.00

7 Erection of Lighting Arrestors: 0.00

Erection of Lightning Arrestor and wiring including movement from the point of unloading to the point of erection. Insulation resistance test, leakage current test, surge counter operation test a) 33KV Class Set 1 333.00 333.00 CommonSR2023-24Volume-6(KPTCL,ESCOMs&PWDEle) Rates for Labour of Major Works SL No:18 Page No.193

b) 9KV 10KA Class Fixing of 3 Nos lightning arrestors including wiring. (COMMON SR 2021-22. 33kV Labour. SL No139.It.No 28) Set 4 111.00 444.00

c)Fixing of Solid Core insulator As per MW SR, Part-II- Pg No:12, Si.No: 23 Per stack 6 111.00 666.00 CommonSR2023-24Volume-6(KPTCL,ESCOMs&PWDEle) Rates for Labour of Major Works SL No:20 Page No.193

Bus Bar formation: Formation of Main/cross bus in each individual bay using Lynx/Coyote - Single/Double conductor with fixing of insulators, spacers, levelling the strung conductors to the required height above the equipment including providing jumps to inter-connect different segments of the main bus. As per MW SR, Part-II- Pg No:12, Si.No: 28. viii Per Bay 5 7364.00 36820.00

9.5/9/8 Mtr. Long, RCC pole for ODS. As per MW SR, Part-II- Pg No:12, Si.No:42.a. Nos 30 2266.00 67980.00

i) 1B1-14.775 mtrs long (with one joint) Nos 18 5675.70 102162.64

ii) 1B2-4 Mtrs long Nos 16 5675.70 90811.24

8 Mounting Structures: 0.00

Erection alignment & assembly of fabricated steel Lattice Structure, pedestal Structures & Mounting Structures for GOS, CTs, PTs LA’s, Pl’s etc. As per MW SR, Part-II- Pg No:12, Si.No: 13.b. MT 2.77 5723.00 15852.71 0.72

9 D.P.Structures: 0.00 0.426

D.P. Structures hardware consisting of double power X-arms, horizonontal cross brace, cross braces, back cleat, strain plate, bolt & nuts, painted with two coats of metal primer and aluminium paint, etc as per drawing .(G.I). As per MW SR, Part-II- Pg No:21, Si.No: 42.b. Set 4 4418.40 17673.60 0.21

10 Coyote ACSR Conductor Kms 0.35 8000.00 2800.00

Lynx Conductor Kms 0.4 8000.00 3200.00

11 11 KV Switchgear Erection, alignment and fixing to the foundation, indoor/outdoor 11KV switchgear Panel/unit (1I+4F+1CB) including movement from the point of unloading to the point of erection. As per MW SR, Part-II- Pg No:12, Si.No: 27.a.ii. Nos. 6 0.00 0.42

Assisting in Testing & Commissioning: As per MW SR, Part-II- Pg No:12, Si.No: 27.a.ii. Nos. 6 2081.00 12486.00 0.142

Wiring: Identification of wires, Ferruling Crimping & Termination of wires for annunciation, etc., Testing of Relays, CTs & Breaker for operation. As per MW SR, Part-II- Pg No:12, Si.No: 27.c.v. Nos. 6 941.00 5646.00 0.852

12 Control and Relay Panels: 9486.00 0.00

a) Erection of control panels, auxilary panels, carrier cabinets etc., alignment and fixing properly to foundation base including movement from the point of unloading to the point of erection. i) 5MVA, 33/11KV transformer. As per MW SR, Part-II- Pg No:12, Si.No: 26.a Panel 1 4191.00 4191.00

b) Wiring and assisting in testing and commissioning of Panels i) 5MVA, 33/11KV transformer. As per MW SR, Part-II- Pg No:12, Si.No: 26.b. Panel 1 7612.00 7612.00

Test & Commissioning: i) C & R Panels Wiring & Testing, Wiring:Identification, Ferruling, Crimping, termination of wires in C&R panels. Testing: Testing for insulation level, Testing of relays, control operations for closing tripping etc., interlocks Alarm, Annunciation and Indication Checks. As per MW SR, Part-II- Pg No:12, Si.No: 26.c.i. Each 1 34463.00 34463.00

13 Laying of 11 kV UG cables in existing trench/G.I. pipe/stoneware pipe/RCC hume pipe using wooden/aluminium rollers as directed by KPTCL staff Cables of sizes 3C x 95 to 3C x 400 Sq mm 0.00

Laying of cable in trench wherever necessary Mtr 100 72 7200.00

Making of cable termination No 4 2658 10632.00

Laying of RCC Hume pipe No 120 69 8280.00

Laying of GI Pipe Mtr 12 93 1116.00

Laying of Route and Joint indicating stone No 20 116 2320.00

14 Laying of Control Cables: 0.00

Laying of control cables from equipments to control panels/Annunciation desk, Necessary termination at both ends with ferrules, lugs etc., as per the instructions of Engineer incharge of work. As per MW SR, Part-II- Pg No:12, Si.No: 25.d. Rmts 1950 15.00 29250.00

Total Labour Portion 598855.79

HUBLI ELECTRICITY SUPPLY COMPANY LIMITED

Estimate for Providing additional 3rd 5 MVA, 33/11kV power transformer at 33/11kV sub-station Tadavalaga in Indi Taluk, Vijayapur District in 33KV S&L Division Vijaypur on PTK basis (5 MVA Power Transformer will be supplied by departmentally).

Sl No Description of work Unit Qty Civil Portion

Unit Rate Amount

1 EXCAVATION:Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work.In all kinds of soils Depth upto 3 m in all kinds of soils Depth upto 3 mm³ (KPWD SR 2023-24, V-1, P-08, I.No.1.14.1) m³ 81.77 102.00 8340.03

2 CONCRETING: a2.1 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.2.1.3 Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates (KPWD SR 2023-24, V-1, P-15, I.No.2.1.3) As per3rd Qtrs Rate. m³ 6.23 5918.00 36839.55 45 36 36.00

3 Foundations: Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technicalspecifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (KPWD SR 2023-24, V-1, P-15, I.No. 2.2.3) As per3rd Qtrs Rate.(5% formwork included) m³ 55.43 7070.70 391937.74 75 45.00

3 i Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification.h. All other type of structures Ton 3.26 69749.00 227626.90

4 BACK FILLING: Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (KPWD SR 2023-24, V-1, P-07, I.No. 1.9) m³ 262.00 266.00 69691.87

5 INSPECTION CHAMBERS: 16.9 Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover..(KPWD SR 2023-24, V-3, P-191, I.No.16.9) No 5.00 5454.00 27270.00

6 Ground Mat: a) Supplying and laying of 50x6mm MS flat, welding and applying ACB paint to welded portion as per the drawing/standard specification and consolidated. All materials by the contractor (COMMON SR . 33Kv Labour. SL.No. 146.It.No.34.c) Mtrs 240.00 404.00 96960.00

b) Providing 25 mm dia M.S. Rod 1.05 metre long earthmat spikes including heating, bending top 50 mm overlap flattening and making spike edge at one end driving into the earth below the ground level and welding the rod with ground mat flat. Each 12.00 453.00 5436.00

c) Supplying and grounding of equipment’s with 50x6mm GI Flat and connecting equipment to the Earth mat/Ground Pit. Each point of earthing with all formation works like bending, twisting and connecting by welding (Inclusive of all T&P and consumables) to the earth mat/ground pit, carrying out the work as detailed above but all the materials supplied by the contractor Mtrs 200.00 335.00 67000.00

d) Supplying and Grounding of equipment by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metre long with 2 partclamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron welding electrodes as per drawing including the cost of excavation (All materials to be supplied by the contractor) Set 18.00 16283.00 293094.00

7 Supplying & Providing 450mm dia 450mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc., (COMMON SR 2023-24.) No 18.00 1499.00 26982.00

8 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) . Pipe: i) 10.1.4 PVC pipes 63mm dia., 6 kg/sqcm & class 3.(KPWD SR 2023-24, V-1, P-113, I.No.10.1.4) Mtrs 200.00 161.00 32200.00

PVC pipes 75mm dia., 6 kg/sqcm & class 3 .(KPWD SR 2023-24, V-1, P-113, I.No.10.1.5) Mtrs 50.00 220.00 11000.00

PVC pipes 25mm dia, 10 kg/sqcm & class 5.(KPWD SR 2023-24, V-1, P-113, I.No.10.1.1) Mtrs 25.00 48.00 1200.00

9 PAINTING: a) Painting of MS structural parts with 2 coats each of approved quality metal primer and 2 coats of aluminum paint (with paints IS approved ) after duly cleaning and scraping the surface with wire brush , complete Sq. Mts 200.00 120.00 24000.00

b) letter writing for labeling of equipment (the cost includes the cost of paint and Labour Charges Complete) Nos 50.00 50.00 2500.00

Sub Total-I 1322078.08

C1 Site levelling

a)Supplying all labour , Machineries, tools, plants etc., and levelling the switchyard area to the required RL , line ,grade & cross section. Work includes cutting in all types of soil and rock including hard rock & hard laterite by blasting /chisteling and wedging in areas above FGL and filling in the areas lower than FGL with excavated soil in layers not exceeding 250mm loose thickness , spreading , breaking clods , removal of roots , and other organic materials , compacting to 96% proctors density using PRR duly adding water and disposing the surplus soil & rock within station premises or outside to any notified areas of the local bodies , etc., complete as per specification , drawings, and directions of engineer in charge of the work. CUM 125.00 448.00 56000.00 0.00

C2 Cable trenches

a)Construction of RCC (grade M20) cable trenches and RCC hume pipe trenches for required section /size including the cost of excavation in all types of soil/rock back filling with available approved earth or borrowed/new earth , disposal of surplus earth to the places directed , concrete ( RCC M20 grade )& lean concrete (1:4:8), precast RCC covers , form work , curing , brick works wherever required , reinforcement steel, steel angles , flats, plates cable trays , RCC hume pipes NP2 class of required size , sundries and other items not mentioned herein but required for completion of work as per technical specification , approved drawings and directions of the engineer in charge of the work .Scope of work also includes arrangements for disposal of rain water from cable ducts .

i) SSY Type-2 RCC cable duct Rmt 40.00 16100.00 644000.00

ii) SSY Type-3 RCC cable duct (With double rows of 150mm dia NP2 class RCC hume pipe including required size of PVC/GI pipe for taking cable from equipments to hume pipes etc) Rmt 10.00 2700.00 27000.00

iii) SSY Type-4 RCC cable duct (With single row of 150mm dia NP2 class RCC hume pipe including required size of PVC/GI pipe for taking cable from equipments to hume pipes etc) Rmt 10.00 1320.00 13200.00

C3 Road Works 0.00

Formation of approach road ( Concrete road) 0.00

a)Providing and forming 5Mtrs wide Concrete road including providing walk ways, within sub station or out side the station premises as per technical specification , layout and sectional detailed drawing etc ., complete in all respect . Rmt 22.00 17800.00 391600.00

C4 Jelly Spreading : 0.00

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineer in-charge of works as per the standard procedure. Cum 216.70 2196.59 476000.00

C5 Providing and laying the switch yard fencing including execavation, pcc(1:3:6), SSM(1:6) with pointing(1:6) and Painting,Concreting for copping and fondation for poles(M20), concreting for poles(M25), including curing, labour machinary. Steel work , fencing work, barbend wire and GI flats works etc, as per the drawing specification. Rmt 25.00 8480.00 212000.00

C6 Miscellaneous & unforeseen works 3688.90 #REF! Providing water supply for the substation including drinking water and water for fire fighting system and earthing pits with borewell, sinking and erection of submersible pump set and drawing pipe line from bore well to Sintex tank to install synthetic tank and providing distribution system inside the station yard servicing the pump set etc., complete EACH 1 569000.00 569000.00

Sub Total-II 1823488.90 1645000

Grand Total 3145566.98