For Water Proofing, Renovation of Door/Window, Plaster, Painting Other Misc Civil Work of Departmental Residence for Office of The EDSD Sandi at 33/11 k.v. Sub Station Sandi District Hardoi

Amount

Excavation in foundation in ordinary soil (Loam clay or sand) including lift upto 1.5 mtr. and lead upto 30 m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation trenches or in to the plinth and removal and disposal of surplus earth as directed by the Engineer-in-Charge upto a distance of 30 m from the foundation trenches.

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers (Asian,cico,durabuild or equivelent Brand as approved by E/I) having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge with 7 years Warranty NSI

Ist class brick work in 1:6 cement & coarse sand (F.M. 1.8 to 2.5) mortar in foundation & plinth including supply of all materials, labour and T&P etc. required for proper completion of work.

Ist Class brick (class 150) work in 1:6 cement & coarse sand (FM1.8 to 2.50) mortar but in supper structure but for wall of one brick thick including supply of all materials, labour T&P etc required for proper completion of work.

Supply and Laying 6 mm thick glazed tiles of size 300x450 mm in skirting / dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete,including supply of all materials, labour and T&P etc. completion required for proper completion of the work.

Supply and Laying 8 mm thick white glazed floor tiles of Somany, Johnson or equivalent make, of size 300x300 mm, laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T&P etc. completion required for proper completion of the work.

Repair to 2.5 cm (1") cement concrete floor in patches including up to 10 cm.(4") depth renewing 8 cm.(3") base concrete consisting of one part cement, 4 parts aproved coarse sand and 8 parts of 4 cm.(1.5") gauge brick ballast as in C.C.floor consisting of one part cement 2 parts approved coarse sand and 4 parts approved stone grit including supply of all materials.labour and T&P etc. required for proper completion of the work.

6 mm. thick plaster with 1:3 cement & coarse sand including labour, materials & T&P etc. required for proper completion of the work.

3 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work. (cement consumtion 0.044 bag/Sq.m.)

Concrete with 4cm gauge I class brick ballast (class 150) , coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion.

Cement concrete with 2 cm. gauge approved hard stone ballast, coarse sand (F.M. 1.8 to 2.5) & cement in proportion 4:2:1 including supply of all materials, labour, side shuttering if required and T&P etc. required for proper completion of work.

Dismantling existing plaster including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M.

12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.

Engaging of Mazdoor

Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work.

Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work.

Supply and fixing of 110 mm dia PVC pipe 4 Kg./ Sq.cm for water supply mains & rain water pipe of Tirupati or equi. Make with special such as Tee, bend, socket, elbow etc. including cutting of pipe where necessary and including excavation of trenches for laying the pipe line of approved size (600 x 900 mm) and including its back filling after testing the pipe line , watering, ramming etc complete including disposal of surplus earth from the sides upto 100 mtr as per direction of Engineer incharge as required for proper completion of work.

RCC work with cement approved coarse sand (F.M. 1.8 to 2.5) and 2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion 1:1.5:3 in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P.

One priming coat and one coat oil bound distemper on new work including supply of all materials,labour and T&P etc. required for proper completion of the work.

As in item 13.08 but for every coat on previously old oil bound distemper surface.

TMT/Tor steel in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor)

Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface, complete with 14 SWG copper earth continuity wire,GP Box ,piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect, as directed .

Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm. thick phenolic laminated backelite sheet etc, complete in all respect.

Wiring Point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface,complete with 14 SWG copper earth continuity wire , GP Box and piano type switch and socket etc. complete in all respect

Wiring point for exhaust fan/Power Plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe on surface complete with14 SWG copper earth continuity wire, 15 A piano type switch & ceiling rose on 3 mm.thick henolic laminated backelite sheet etc, complete in all respect.

Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect.

Providing and fixing steel glazed window and ventilators of standard rolled Mann or Mahavir steel sections conforming to IS 7452-1974 as per drawing joints metered & welded with 100x14x3.15 mm holdfast embedded in cement concrete block 15x10x10 cm. Size of 1:3:6 proportion I.E. First part of cement 3 part of approved coarse sand & 6 part of graded stone (aggregated 20mm. Nominal size) S/F of glass panes of plain pin headed 4mm. Thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. The fabrication should conform to I.S.1038-1975. (Aluminum beading with rubber packing included).

Mild Steel or Iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor.

Renewing panes of 4.8 t0 5.7 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.(a) glass of 5 mm thick.

Finishing walls with water proof cement paint of approved made like "Super Snowcem" or equivalent quality on new work with two coats to give an even shade including supply of all materials, labour etc. required for proper completion of work.

Same as in item 13.17 but for each coat of water proof cement paint. on previously treated surface.

Painting two coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including thorough washing with water including cost of all materials, labour, T&P required for proper completion of work

Providing and Fixing 16 mm dia PVC Pipe PPR Plumbing System, Non Resting, Anti Microbial, PPR Pipe PN 16/SDR, ISI Marked including supply of all material, labour and T&P etc. required for proper completion of work

Providing and Fixing 25 mm dia PVC Pipe PPR Pipe PN 16/SDR, ISI Marked including supply of all material, labour and T&P etc. required for proper completion of work

Providing and Fixing 25 mm dia PVC full way gate valve, ISI Marked including supply of all material, labour and T&P etc. required for proper completion of work

P/FBRASS BIB COCK, 15 mm dia (200 gms) ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

Supply and fixing P.V.C. cistern Hindustan or equivalent make 10 litres. Capacity complete with all accessories (Low level) including all materials, labour and T&P etc. complete.

Providing and fixing 100 mm dia PVC "P" or "S" trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.)

Supply and fixing Syntex or equivalent make water storage tank including all materials, labour and T&P etc. required for the proper completion of the work.

Providing and fixing flat back 465 mm.x 355 mm x 265 mm. size lipped front urinal basin of white glazed earthern ware first quality (Hindutan, Neycer make) I.S.I. marked including supply of all materials,labour and T&P etc. required for proper completion of the work.

Providing and fixing white glazed earthen ware W.C. "Orissa" Pan Hindustan make of size (58×44)cm including supply of all materials, labour and T&P etc. required for proper completion of the work.

Providing and fixing 450x300 mm wash hand basin of white glazed earthern ware first quality I.S.I. marked (Hindustan,Neycer / Cera make) including supply of all materials, labour and T&P etc. required for proper completion of the work.

Supply and fixing of Bajaj Fresh/Exhaust fan including cost of all materials, labour, T&P etc. for proper completion of the work.

Providing and fixing 100 mm dia C.P. grating over Nahani Trap or drain holes including cost of all materials, labour and T&P etc. required for proper completion of the work.

Supply and fixing Nahani Trap India make of heavy approved quality complete with C.P. brass grating, Nahani Trap laid over base cement concrete 1:6:12 including cost of cement supply of all materials, labour and T&P etc. required for proper completion of the work.

Supply and fixing galvanised mosquito proof jali (16x24 gauge) with M.S. flat of 20 x 3 mm. size, on both sides screwed or welded to window or door frame.

First class bricks on edge floor laid dry, joints sand filled, including preparation of base to proper slope and its ramming including supply of all material labour & T&P etc. required for proper completion of the work.

Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other aluminium fittings including their supply including all materials, labour & T&P etc. required for proper completion of work.

Note :- 1 GST Will paid only extra as applicable. 2 Quantity of individual item may increase or decrease to any extent as per site condition 3 Dismantling item work if recovery required it deducted from contractor bill’s 4 All the item rates including labour cess, no extra payment shall be done.

innovative enterprises