GE 861 EWS-47 (T)/2025-26

Amount

Surface excavation n exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Hard/Dense soil complete all as specified and as directed by Engineer-in-Charge.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed by Engineer-in-Charge.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-Charge.

M&L for Hard core of gauge exceeding 63mm but not exceeding 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, broken stone or boulders watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.

M&L for PCC type D2 (1:4:8) (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L for Reinforced cement concrete (Design Mix) M-25 as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L for Reinforced cement concrete (Design Mix) M-25 as in Columns, pillars, piers, posts and struts complete all as specified and directed by Engineer-in-Charge.

M&L for Reinforced cement concrete (Design Mix) M-25 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engineer-in-Charge.

M&L for Reinforced cement concrete (Design Mix) M-25 as in slab complete all as specified and directed by Engineer-in-Charge.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat fair finished surface of concrete complete all as specified and directed by Engineer-in-Charge.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions flat fair finished surface of concrete complete all as specified and directed by Engineer-in-Charge.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc flat and rough finished surface of concrete complete all as specified and directed by Engineer-in-Charge.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat and rough finished surface of concrete complete all as specified and directed by Engineer-in-Charge.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks built in cement 1:4 complete, in walls complete all as specified and as directed by Engineer-in-Charge.

M&L for 100 mm thick PCC type D2, (1:4:8) (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for Rendering 15mm thick in cement mortar 1:4 using liquid waterproofing compound as per manufacturer instruction on fair faces of brick work or concrete surfaces of wall finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note:- Water proofing compound to be measured and paid separately.

M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces of wall finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Supply only Liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge.

M&L for Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry over and including screed bed or bedding layer of 15 mm thick with cement mortar 1:4 and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge.

M&L for Glazed ceramic tiles in vertical surfaces 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry over 10 mm thick rendering in cement mortar 1:4 and pointed in white or colour cement to match the colour of tiles complete all as specified and as directed by Engineer-in-Charge.

M&L including preparation of newly plastered surfaces of walls and applying with two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed by Engineer-in-Charge.

M&L including preparation of newly plastered surfaces of wall with and applying three coats white wash complete all as specified and as directed by Engineer-in-Charge.

S&F for Mild Steel works as in framed roof trusses, purlins, rails and fastenings including distances pieces, cleats etc conforming to Fe 410 W (Gde-E250) Quality 'A' complete all as specified and as directed by Engineer-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

M&L including preparation of new steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and as directed by Engineer-in-Charge.

S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane complete all as specified and as directed by Engineer-in-Charge.

S&F factory made solid PVC door frame of size 50mmx47mm made out of 5 mm wood grain printed PVC sheet with mild steel square tube complete as per manufacturer specification & drawing complete all as specified and as directed by Engineer-in-Charge.

S&F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of mild steel tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement fixing in the frame at site as per specification, drawing complete all as specified and as directed by Engineer-in-Charge.

Supply and fix butt hinges 100MM, medium weight complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 150 mm aluminium handle cast type, anodised, complete all as specified and as directed by Engineer-in-Charge.

Removing excavated material/soils to a distance not exc. 50 mtr and depositing where directed at a level not exc.1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Vitreous China wash down water closet (Squat pattern) white complete as fixed in repair excluding flushing cistern and flush pipe "Orissa" pattern size 580x440 with integral footrest inlet connection to trap anti-syphonage etc complete including joint between flushing pipe and closet of WC complete all as specified and as directed by Engineer-in-Charge.

S&F 10 Ltr capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed by Engineer-in-Charge.

Supply only Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern etc complete all as specified and as directed by Engineer-in-Charge.

Supply & fix vitreous China wash basin, white, flat back, size, 550X400mm including bracket for fixing 32 mm waste coupling, waste pipe etc complete all as specified and as directed by Engineer-in-Charge.

S&F Vitreous China bowl urinal flat back, size of 430x370x340 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT or COLD' with long screwed shanks and fly-nuts, screwed for iron pipe or for connection pipe complete all as specified and directed by Engineer-in-charge.

S&F Bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-Charge.

S&F stop valve of 15mm bore, chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for brass ferrule complete all as specified and as directed by Engineer-in-Charge.

S&F PVC connection 15 mm size PTMT nuts of length 600 mm complete all as specified and as directed by Engineer-in-Charge.

S&F soap dish vitreous China white size 160x160x90mm approx complete all as specified and as directed by Engineer-in-Charge.

S&F Brass chromium plated shower rose 125mm size complete all as specified and as directed by Engineer-in-Charge.

S&F tubular towel rail 20mm dia D type 60cm long aluminium anodised between two flange including bracket complete all as specified and as directed by Engineer-in-Charge.

S&F 15 mm bore steel tubing medium grade galvanised with all fittings and connection complete all as specified and as directed by Engineer-in-Charge.

S&F 20 mm bore steel tubing medium grade galvanised with all fittings and connection complete all as specified and as directed by Engineer-in-Charge.

S&F 20mm bore gun metal glove or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and as directed by Engineer-in-Charge.

S&F 500 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layers hoisted and fixed in position complete all as specified and as directed by Engineer-in-Charge.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall, laid in trenches or in floors complete all as specified and as directed by Engineer-in-Charge.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-Charge.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/wall or in floors complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed by Engineer-in-Charge.

S&F PVC (SWR) junction double, (double T), equal or unequal complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm PVC (SWR) vent cowl complete all as specified and as directed by Engineer-in-Charge.

M&L for providing RCC precast cement concrete type B-0 (1:2:4) (using 12.5 mm graded crushed stone aggregate) as in cover slab for manhole and similar article with plain face set in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. Note : Reinforcement shall be measured and paid separately.

M&L for Concrete bed to 150 mm dia drain pipes including packing under and hunching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate complete all as specified and as directed by Engineer-in-Charge.

M&L RCC pipes class NP-2 with socketed ends laid and jointed complete of 150mm bore complete all as specified and as directed by Engineer-in-Charge.

Construction of 1.2 M dia and 3m depth Soakage well including excavation, in any type of soil, foundation in PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonry in CM, RCC cover slab in M25/ SFRC cover, inter-connecting pipes of RCC/DWC complete filled with brick bats of size complete all as specified and as directed by Engineer-in-Charge.

M&L for on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate in foundation, Vent shaft, connection etc., complete for 20 users complete all as specified and as directed by Engineer-in-Charge.

S&F for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size, & as directed by Engineer-in- Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and as directed by Engineer-in-Charge. NOTE: a) Colour coding shall be followed as given below:- (i) Phase - Red/Yellow/Blue (ii) Neutral - Black ( iii) Earth - Green (a) One light point/ Fan point/ point controlled by one 5A switch.

Description All as per item No-67 here in above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and as directed by Engineer-in-Charge.

Description all as per item No 67 above but for 3 pin socket outlet 15 Amps independent board with 2.5 Sqmm complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal 240 volt complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement Switch socket combination 2 in 1, 3 pin, 15 Amp flush type universal 240 volt complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and as directed by Engineer-in-Charge.

S&F of lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and as directed by Engineer-in-Charge.

S&F decorative ultra slim linear LED 1x20 Watt lighting fixture wall mounted with extruded aluminium heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up three copper flexible cable from ceiling rose to fittings including connecting up and fixed on including two Nos PVC square box of required size complete all as specified and as directed by Engineer-in-Charge.

S&F of LED Lamp 9 W complete all as specified and as directed by Engineer-in-Charge.

S&F of LED Lamp 10 W complete all as specified and as directed by Engineer-in-Charge.

S&F of Bulkhead light fitting PVC waterproof 6W IP 65 complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing MCB, SPN (Single Pole Neutral), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing MCB, SPN (Single Pole Neutral), AC, 240 volts, B series capacity 32 Amps 10kA and making connections complete all as specified and as directed by Engineer-in-Charge.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m complete all as specified and as directed by Engineer-in-Charge.

S&F, laying of 10X2 sqmm 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire, one twin core cable flat or circular 10Sqmmx2core complete all as specified and as directed by Engineer-in-Charge.

Supply and laying or fixing or passing through pipe or binding with fencing/pole etc, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 Sqmm nominal cross section 2 core solid conductor complete all as specified and as directed by Engineer-in-Charge.

Supply and laying Galvanized iron pipe medium grade 25mm bore size laid in trenches including all accessories complete all as specified and as directed by Engineer-in-Charge.

Supply and laying Galvanized iron pipe medium grade 20mm bore size laid in Floor/wall including all accessories complete all as specified and as directed by Engineer-in-Charge.

S&F 25mm bore gun metal glove or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and as directed by Engineer-in-Charge.

M&L for cutting into existing CI/GI pipe line of 50mm to 100mm bore and inserting tee and tapping new connection with all accessories complete all as specified and as directed by Engineer-in-Charge.

M&L for cutting into existing CI/GI pipe line of 20mm to 50mm dia and inserting tee and tapping new connection with all accessories complete all as specified and as directed by Engineer-in-Charge.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm centre to centre both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and as directed by Engineer-in-Charge.

S&F LED Bldg security light fitting 35Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engineer-in-Charge.

Supply and install water heater vertical type ,stationary storage type of 25 ltr capacity having stainless steel inner vessel, five star rating , ISI Marked close/vented type (star marked) , 240 volts with heating element and auto cut thermostat, maximum output of hot water is 60 degree celsius, including fixing arrangement nut bolts, washer/fasteners and finishing work etc complete as per existing surface complete all as specified and as directed by Engineer-in-Charge.

M/S SHAH RAOUF (BID ID -3476200)

JANDOO AND CO (BID ID -3480431)

Asian Marketing Co (BID ID -3481381)