SPL REP TO LIGHTING INFRASTRUCTURE AT RSOI AREA AND PROVN OF INVERTER BACKUP AT CENTRAL MI ROOM AT UMROI MIL STN UNDER GE UMROI

Amount

Supply, installation, commissioning and testing of Galvanized steel high mast lighting system of 16 meter height in two section, top section of 150 mm dia made up of 3mm thick sheet and bottom section of 360mm dia made up of 4mm thick sheet designed to withstand wind speed upto 180kmph, with 2/3 wire rope system and its accessories. High mast should be suitable for fittings of 8 Nos. flood light of capacity 200W LED lights, Non flame proof motor,movable lantern carriage, double drum winch 6mm, 316 Grade SS hoisting ropes of 7/19 construction, trailing cable -1 per mast (5 core 2.5 sqmm), lightning finial, anchor plate & template foundation nut, bolts, etc. power supply up to the panel & providing power cable from high mast to panel, crane for installation of high mast, unloading of materials, shifting of material from store to site, accessories like plug and socket, GI nut, bolts with double washer, wiring cable for fixture, flexible conduit, copper lugs, pvc tape, cable tie, etc. complete all as specified and as directed. Notes :- (i) Necessary RCC foundation & bolting required for installation high galvanized mast light shall be provided as per manufacturer's recommendation and the cost for the same shall be deemed to be included in the rate quoted for this item. (ii) The cost of lantern carriage assembly and all other standard accessories shall be deemed to be included in the rates quoted for this item. (iv) Flood light shall be measured and paid separately under respective item catered here-in-after. Make of High mast:- Bajaj/Crompton Greaves Limited/Havells

S&F LED aviation light on high mast complete all as specified and directed. Make: Bajaj/Crompton Greaves Limited/Havells

S&F Feeder Panel for high mast fabricated out of 1.6mm CRCA steel sheet of suitable size, outdoor type, stand mounting, dust & vermin proof, IP-55, powder coated with 7 tank process, stand of size 40x40x3 mm MS angle including following accesorries(Rating of accessories shall be as per manufacturer's recomendation): TP Contactor -03Nos, Time switch -01No, MCB TPN-01No, MCB SP-01No, Glass fuse-01No, Push button-02Nos, Toggle switch -01No, Neutral link-01 No. Terminals aluminium bus bar suitable for incomer cable 70sqmm size and outgoing cable 16sqmm size. Panel shall have Pad locking arrangement, 02 Nos of earthing terminals, Danger plate etc. Note: (i) The cost of PCC(1:3:6 type C2) foundation for panel shall deemed to be inclusive in the quoted rate. (ii) Drawing for panel shall be approved by the GE before procurement.

S & F 200 Watt LED flood light made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with 30-60D beam angle, IP 66 protection system efficiency >110/LPW,10KV SPD, BIS approved for luminaire & Driver to attach LM 79 and LM 80 reports from NABL Lab complete all as specified and as directed. Make: Bajaj/Crompton Greaves Limited/Havells

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation of pole and laying of UG cable and getting out in soft/loose of soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Supply, laying, testing & commissioning UG cable XLPE insulated,armoured heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross sectional area 50 sq mm, 3.5 core complete all as specified and directed.

Supply, laying, testing & commissioning UG cable XLPE insulated,armoured heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross sectional area 16 sq mm, 4 core complete all as specified and directed.

Supply, laying, testing & commissioning UG cable XLPE insulated,armoured heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross sectional area 6 sq mm, 2 core complete all as specified and directed.

Supply & filling sand for cushioning to the under ground cable 8 cm before laying the electric cable and 15 cm after laying the cable complete all as specified and directed. Note: Punned thickness shall be measured and paid under this item.

M&L for common burnt clay building bricks sub-class ‘B’ designation 75 of size 230x115x75 mm to cover LT underground cables, laid dry and flat complete all as specified and directed.

Supply and fixing/laying GI tubing light grade of size 80 mm bore with all fittings laid in trenches or fixed to wall for protection of cable complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 m below normal ground level, connecting to the galvanised iron earth strip of size 36mm x 6mm by means of bolts, nuts, check nuts and washers of galvanised iron, earth strip shall be protected by provision of GI medium grade pipe 40mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agregates with 40mm thick cover of RCC (1:2:4) type B-1 including reinforcement and one handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering, perforated at bottom. 1.75 metre long placed on top edge of earth plate, charcoal and common salt filled 150 mm thick all around the earth plate with fixing arrangement, funnel wire mesh and earth work in any type of soil returning filling in and removal of surplus soil to a distance not exceeding 50 m all as per electrical plate No 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion.

M&L for PCC(1:3:6) type C2 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.

S&F in repair/replacement LED Flood light 100 Watt made up of pressure die cast aluminium housing with toughened glass and high power LEDs and Secondary lenses with IP 66 protection with 10 KV SPD complete all as specified and directed. Make: Crompton/Havells/Phillips/Wipro/Bajaj

S&F in repair/replacement LED Flood light 150 Watt made up of pressure die cast aluminium housing with toughened glass and high power LEDs and Secondary lenses with IP 66 protection with 10 KV SPD complete all as specified and directed. Make: Crompton/Havells/Phillips/Wipro/Bajaj

S&F in repair/replacement junction box out door type comprising of enclosure made out of 3 mm thick CRCA sheet of size 300mmx300mmx200mm powder coated, front opening with locking arrangement including 04 Nos of aluminium busbar of 200 amps 1100 volt grade , busbar duly fixed and including post insulators with provision of 02 Nos cable gland holes suitable for 01 incoming/ 01 outgoing cable with 01 No of 06Amp MCB SP and providing with rubber bushing with provision of earthing connection nuts, bolts,with clamp of suitable size complete all as specified and directed.

M&L Steel Tubular swaged pole complete with cast iron base plate, final taper, bolts, nuts and screws, etc as specified for type 410-SP-31 (9.00 m long) including painting with two coats of aluminium paint over one coat of red oxide primer, duly drilled hole 6 Nos at top portion of pole for fixing and including D clamp insulators complete all as specified and directed.

M & L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of two coats of aluminium paint over a coat of red oxide zinc chrome primer complete all as specified.

S & F energy saving LED spike light of IP66 using COB LED of capacity 12/15 W including taking down of old unserviceable light. Make : Havells Cat No LYCUSSPS15WLED730PSYMBOTG or equivalent make of Crompton/Phillips/Wipro/Bajaj

S&F in repair/replacement LED Flood light 70 Watt made up of pressure die cast aluminium housing with toughened glass and high power LEDs and Secondary lenses with IP 66 protection with 10 KV SPD complete all as specified and directed. Make: Crompton/Havells/Phillips/Wipro/Bajaj

S&F LED decorative Bollard light warm white of 10W, IP65 for new generation, post top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source including taking down old unserviceable bollard light of any capacity , Make : Crompton Cat No. LBLTW-10-WW or equivalent make of Havells/Phillips/Wipro/Bajaj

Supply and fixing all in one comprising of high efficiency LEDs (120 lm/W), solar street Light with luminaire wattage 24/25W, High Efficiency Mono Crystalline Solar PV Module 12V 50W, lithium Ferro phosphate battery 12.8V 24Ah with inbuilt BMS technology, high efficiency LED >93%, MPPT solar charge controller and aluminium extruded body, specially designed intelligent microwave sensor to control the dimming NAD brightness of light leads to extend working time and 5 mtr long octagonal pole (type CPT-5030) top dia 70 mm bottom dia 130 mm sheet thickness 3 mm including base plate of size (L x B x T) 200 x 200 x 12 mm, bolt size 4 x 16 mm dia and bolt length 450 mm, including taking down old unserviceable solar light of any capacity. Make:Crompton/Havells/Philips/Bajaj/Wipro

Supply and fixing of LED street light fittings in aluminium PDC housing, toughened glass cover,individual LEDs with secondary optics,covered with IP66 protection with inbuilt surge protection of minimum 10 kV of capacity 60W suitable to fix in 40 mm dia GI bracket including taking down old unserviceable street light of any capacity. Make:Crompton/Havells/Phillips/Wipro/Bajaj

Supply and fixing of LED street light fittings in aluminium PDC housing, toughened glass cover,individual LEDs with secondary optics,covered with IP66 protection with inbuilt surge protection of minimum 10 kV of capacity 100W suitable to fix in 40 mm dia GI bracket including taking down old unserviceable street light of any capacity. Make:Crompton/Havells/Phillips/Wipro/Bajaj

S&F 32 mm dia GI tubing light grade bracket over all 1.2 mtr length with cutting as required and bend to shape with flat iron clamp of size 32 mmx4mm-02 Nos, suitable size of nut bolts and washers complete for fixing street light fittings on electric poles including taking down old unserviceable/fully rusted existing unserviceable one complete all as specified and directed.

S&F in repair/replacement nature switch in enclosure made out of UV stablized, FR grade special moulding compound, rust proof, electric shock proof, vermine proof outdoor pole mountable with mounting bracket made out of FI and nut, bolts, washers including cable glands, openable door with lock comprising with nature switch sensor,power contactor three phase-03nos rating, 32 amps per phase , 06 nos of MCB for max load 12-15kw including taking down existing nature switch,Ip 66 enclosure complete all as directed. Make:- Kakatiya Energy System Ltd.cat No. SWADEEP-02EC-12kw3p, IP-66 enclosure or equivalent of make Indo Asian/Legrand.

S&F submain wiring with three run 1.5sqmm FRLSH PVC insulated copper conductor, single core cable in non metallic PVC conduit fixed on pole/surface as required complete all as specified and as directed.

Supply, testing and commissioning of tall tubular battery of rated capacity 200 AH, 12 V. Make- Luminous model- LETT20060 or equivalent in Amara raja/ Exide/ Okaya

Supply, testing and commissioning of Sine wave inverter of capacity 3.5 KVA, 48V. Make- Luminous model- Cruze 350048V or equivalent in Amara raja/ Exide/ Okaya

M&L for point wiring with 4.0 sqmm FRLSH PVC insulated and sheathed multi stranded (FRLSH) flexible copper conductor cable drawn in PVC casing and caping on surface wall, ceiling with sunk cast iron/pressed steel terminal boxes of adequate size with suitable thickness plastic laminated sheet, cover for one 3 pin socket outlet 15 Amp on independent board including continuous 4.0 sqmm copper conductor cable (FRLSH) (multistanded) PVC insulated and unsheathed cable as earth wire to common earth dolly complete all as specified and directed.

Supply and fixing switch socket out let combination multipurpose 3 pin, 5/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) complete all as specified and directed.

Supply and fix in repair MCB SPN DB 4 way double door, IP 43 protection, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09, fix with concealed wall including making good wall surface by plastering and civil work to match the existing complete all as specified and directed.

M&L for MCBs double pole (SPN) 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards confirming to IS/IEC 60898-1 (ISI marked) complete all as specified and directed.

M&L for MCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards confirming to IS/IEC 60898-1 (ISI marked) complete all as specified and directed.

Supply and fix sub main wiring with three run of single core (FRLSH) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 4.0 Sqmm drawing into and including PVC casing and caping of adequate size and making electric connections with proper colour coding, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed. Note :- (i) Quoted rate are deemed to be inclusive of cutting chases for sinking for boxes cutting and making holes in wall/floor for passing in or through conduit. (ii) Three run of 4.00 sqmm single core (FRLSH) PVC insulated copper conductor cable and one run of PVC conduit of suitable size will be measured as one run.

Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to earth lead wire 4 mm dia by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar, funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary excavation and earth works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I complete all as specified and directed.

S&F inverter battery stand suitable for 04 Nos of tubular battery and 01 No of 3.5kva inverter all as specified and as directed

Schedule of Credit

M/s Jaiswal and Co (BID ID -3343916)

M/S D.R enterprise (BID ID -3343652)

M/s UB Enterprise (BID ID -3343606)

M/S DIL SINGH BISWA AND CO (BID ID -3338743)

M/S U.K ENTERPRISE (BID ID -3344761)

M/S AKC ENTERPRISE (BID ID -3343789)

HAMZA CONSTRUCTION CO (BID ID -3343069)

M/s SS Engineering (BID ID -3344571)

M/s A L Traders (BID ID -3340539)

M/s M.L Consortium (BID ID -3341966)