Repair Maintenance of Ceiling fan/Exhaust fan of OTM and MD Accn under AGE EMII of GE(N) Mamun.

Amount

Taking down carefully Ceiling fan / Exhaust fan of any rating / capacity from site (as directed by JE/Engr-in-Charge) and after repairing complete again refixing in same position complete. ( Note-:Spares parts will be measured and paid separately under respective items).

Dismantling and taking out burnt winding wire by cutting, cleaning slots and re-winding of AC ceiling fan motor 1200mm/1400mm sweep any make with super enameled colour copper winding wire of existing gauge and size weight not less than 200gms and not more than 350 gms including, sleeve work, varnishing with F class insulation paper with threading, ensure the all blede screws of existing size before issuing to concern unit complete all as specified and directed (Note :- (i) Doctor brand or equivalent ISI brand varnish shall only be used. (ii) Motor shall be wound with machine only. (iii) BIC/HTP or DEVIDYAL, make super enameled copper winding wire shall only be used.

All as per Srl item No 02 here-in-above but weight more than 350 gms but less than 500 gms complete all as specified and directed.

All as per Srl item No 02 here-in-above but weight above 500 gms complete all as specified and directed.

Replacement of old unserviceable gun metal bush as per existed size of ceiling fan complete all as specified and directed.

Replacement of old unserviceable capacitor AC 230 volts 2.5 mfd complete all as specified Make:Havells/Epcos/Matrix.

All as per Srl item no 06 here-in-above but 3.15 mfd complete all as specified.

All as per Srl item no 06 here-in-above but 4.0 mfd complete all as specified.

Replacement of old unserviceable ball bearing suitable for ceiling fan. Make -SKF complete all as required or directed

Replacement of old unserviceable shackle assy kit (rubber real -01, MS split clamp two Nos, nuts and bolts washers 2 Nos & split pin -02 Nos) suitable for ceiling fan 1200/1400mm sweep of any make complete all as specified and directed.

Replacement of old unserviceable fan blades made of MS sheet duly powder coated ,of type make and colour as of ceiling fan suitable for 1200mm sweep ceiling fan of any make complete all as specified.

All as per Srl Item No 11 here-in-above but suitable for ceiling fan 1400mm sweep ceiling fan of any make complete all as specified.

Replacement of old unserviceable down rod of ceiling fan made of MS tubing 15 mm heavy duty of length 45 cm complete with split pin, hanging clamp and rubber real complete all as specified.

Replacement of old unserviceable down rod of ceiling fan made of MS tubing 15 mm heavy duty of length 60 cm complete with split pin, hanging clamp and rubber real complete all as specified.

Replacement of old unserviceable down rod of ceiling fan made of MS tubing 15 mm heavy duty of length 90 cm complete with split pin, hanging clamp and rubber real complete all as specified.

Servicing of ceiling fans of capacity 1200/1400mm including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws and refixing to the existing site after servicing complete all as directed by Engr-in-Charge. (Unserviceable parts other than specified in this item if any will be measured seperately).

Servicing of Exhaust fans of capacity 450/350/300/250mm including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws and refixing to the existing site after servicing complete all as directed by Engr-in-Charge. (Unserviceable parts other than specified in this item if any will be measured seperately).

Supply and Fix cable PVC insulated and overall sheathed with flexible copper conductor 3 core of size 0.5 sqmm,cut to size all as required at site for connection from ceiling rose to connector block of ceiling fan.

Dismantling and Re-winding of exhaust fan motor 250-300mm sweep any make of fan with super enameled copper winding wireof same size as of existing SWG including cutting and getting out old brunt winding, sleeve work, varnishing with E class insulation varnish, threading, connections with twin core copper flexbile wire of size 23/0.0076mm of length not more than one mtr with each fan complete all as specified and directed. (Note :- (i) Doctor brand or equivalent ISI brand varnish shall only be used. (ii) Motor shall be wound with machine only. (iii) BIC/HTP or DEVIDYAL, make super enameled copper winding wire shall only be used. (iv) Copper winding shall be weight not less than old existing repaired fan

All as per Srl item No 19 here-in-above but above 300mm-450mm sweep and weight upto 500 gms complete all as specified and directed..

Removing old paint by scraping with sand paper including washing and filling cavaties with filler and applying two coats of super enamelled synthetic paint to ceiling fan of size 1200/1400mm sweep at site as directed by Engr-in-Charge .

Removing old paint by scraping with sand paper including washing and filling cavaties with filler and applying two coats of super enamelled synthetic paint to exhaust fan of size any size upto 450mm sweep at site as directed by Engr-in-Charge .

Replacement of old unserviceable fan blades made of MS sheet duly powder coated ,of type make and colour as of existing exhaust fan suitable for fans up to 300mm sweep any make complete all as specified.

Replacement of old unserviceable fan blades made of MS sheet duly powder coated ,of type make and colour as of existing exhaust fan suitable for fans above 300mm and upto 450mm sweep any make complete all as specified.

Supply & Fixing in Replacement of old unserviceable fan blades made of polycarbonate high grade plastic/MS sheet duly powder coated ( as requirement at site), type make and colour as of existing exhaust fan suitable for fans up to 300 mm sweep any make complete all as specified.

Supply and Fixing in replacement of Venti air exhaust fan 230 mm sweep meatallic body with lowers with fame and all accessories connecting from ceiling rose to connector by PVC flaxeble copper conductor 0.50 sqmm 3 core and all as specified and directed. Make Havells Model No-Ventil Air-DSP or Bajaj Model-SKU070000 or Khaitn Model-Euro metal.

S & F Electronic fan regulator , step type , hum free socket type suitable to control speed of fan 0-100%, 230 v , 100 watt etc complete all as specified and directed

Taking down carefully geyser 35 to 50 ltrs capacity from wall after unscrewing nuts/bolts etc and again refixing in position after repair & replacement of spare-parts, descaling of rust and rubbish material from the inner tank testing complete after replacing the unserviceable spare parts all as specified. Note:- 1.Spare parts/ items required will be measured and paid separately under respective items.2. Service will be povided 7 days incl .sunday / Holidays

All as per Srl Item No 28 here-in-above but capacity upto 25 ltrs.

Supply & Fix in replacement of thermostat ISI marked suitable for geysers upto 50 Ltrs Capacity. The adjustable range shall be 0 - 75 degree celsius complete all as specified.

Supply & Fix in replacement of fusible plug made brass with fusible lead suitable for geyser of capacity upto 50 ltrs.

Supply & Fix in replacement of air release valve ISI marked suitable for geysers upto 50 ltrs capacity.

Supply & Fix in replacement of safety valve dead wt. type ISI marked suitable for of capacity upto 50 Ltrs.

Supply & Fix in replacement of old unserviceable syphon assembly made out of brass suitable for 50 ltrs capacity geyser including necessary studs, screws and rubber gasket/washers complete all as specified and directed.

Supply & Fix in replacement of old unserviceable syphon assembly made out of brass suitable for 25 /35 ltrs capacity geyser including necessary studs, screws and rubber gasket/washers complete all as specified and directed.

Supply & Fix in replacement of heating element titanium coated of 1.5 KW rating suitable for water heater storage type any make and type as required at site including rubber washers (ISI marked)(as per sample)

Supply & Fix in replacement of heating element titanium coated of 2.0 KW rating suitable for water heater storage type any make and type as required at site including rubber washers (ISI marked)(as per sample)

Supply & Fix in replacement of old unserviceable Internal tank of geyser 25/35 Ltr capacity made of stainless steel weight not less than 4.5kg complete all as specified and directed. Notes: (i) The tank shall be tested at site and shall be able to with stand requisite pressure make as approved.

All as per Srl item No. 38 here-in-above but 50 Ltr capacity wight not less than 5.5 kg complete all as specified make as approved.

Supply & Fix in replacement of old unserviceable PTMT connection pipe with brass hexagonal adopters/nuts both sides, 15mm bore (300 mm long) complete ISI marked, suitable for cold & hot water upto 0-80 degree celcius all as specified and directed make as approved.

Supply & Fix in replacement of old unserviceable PTMT connection pipe with brass hexagonal adopters/nuts both sides, 15mm bore (450 mm long) complete ISI marked, suitable for cold & hot water upto 0-80 degree celcius all as specified and directed make as approved.

Supply & Fix in replacement of non return valve 15mm dia of brass ISI Marked all as specified and directed make as approved.

Supply & Fix in replacement of old unserviceable thermal insulation material non hygroscopic, fire resistant fiber glass wool for 25-50 ltrs capacity geyser complete all as specified and directed by Engineer-in-Charge make as approved.

S & F in replacement Outer container made out of 14 guage CRCA sheet duly painted for water heater storage type of capacity 25 ltrs and all as specified and directed make as approved.

All as per Srl Item No 44 here-in-above but for 50 ltrs cap.

Supply & Fix in replacement of neon indicator lamp as per sample for geyser of cap upto 50 Ltrs any make and type (Green & Red)

Supply & Fix in replacement PVC insulated and PVC sheathed cable 3 core 2.5 Sq.mm flexible stranded all as specified and directed.Make : Plaza/Grandlay/Finolex.

Supply & Fix in replacement 3 Pin Plug Top stranded all as specified and directed.Make : Havells/GM/Anchor.

Supply and Fix in Replacement of single phase metal clad socket with cape of 20 Amp Capacity and 2 pole with earth stud and all as specified and directed.Make : Anchor/Legrand/Schneider.

Supply and Fix in Replacement of MCB SP 20 Amps . Make Hager/Legrand/Schneider.

Removing old paint by scraping with sand paper including washing and filling cavaties with filler and applying two coats of super enamelled synthetic paint to Geyser of make any size upto 50 Ltr capacity at site as directed by Engr -in- Charge.

Supply and Fix in Replacement of switch socket combination 5 pin Multipurpose 6/16 Amps . Make Anchor/Legrand/Schneider.

M&L 15mm bore bib taps fancy type, chromium plated cast copper alloy long body with capstan heads, screwed for iron pipe or brass ferrule fixed in repairs complete all as specified and directed. Make : Marc Cat part No MOR-1030 or equivalent of Hindware/Jaquar.

M&L 15mm bore Stop valve cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union fixed in repair, etc complete all as specified and directed.

S&F carbon steel anchor bolt, Nut & washer of size 12mm dia & 80 mm length for fixing of Gesey capacity 25/50 ltrs complete all as specified & directed

GOLDEN CONSTRUCTIONS

Paramjit Singh and Co

vivek and co

INDIA ELECTRIC WORKS

KULBHUSHAN AGGARWAL