REPAIR/MAINTENANCE OF MISC ARTICLES OF FURNITURE UNDER GE (WEST) DELHI CANTT-10

Amount

TABLE DRESSING GENTS : FD-31(M) / 230 / 379 Dismantle, take out carefully & replace old components of table dressing gents Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. : Qty - 288

Replacement of old existing broken top of table dressing gents of any description with S&F new top of table dressing gents with 12mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 3mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE).

Replacement of side with S&F new side with 12mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE).

Replacement of bottom with S&F new bottom with 12mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE).

Replacement of drawer with S&F new drawer made to shape fixed in position.

Replacement of back frame with S&F new back frame with 6mm thick commercial ply grade I BWR grade made to shape fixed in position. (Make of Ply :- Greenply/ Century/ Duro)

Replacement of knob with S&F new chromium plated knob 25mm dia, 24mm length as approved by the Engineer-in-Charge of best quality.

Replacement of mirror with S&F new mirror of size 380mm x 760mm x 5.5mm thick made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge/GE (make - Modi gurard/Saint Gobin)

Polishing one coat to old and two coats to new surfaces to table dressing gents with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture.

TABLE DINING FOR 6/4 PERSONS : FD/MAP-II/03 Dismantle, take out carefully & replace old components of table dining. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. : Qty - 100

Replacement of old existing broken top of table dining 6 persons of any description with S&F new top of table dining 6 persons with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE.

All as per Srl item No. 3.01 here-in-before but top of table dining 4 persons.

L-Shape wooden corner of size 4" x 4" x 1" to the Table between legs and rail to be fixed with screw.

Replacement of leg with S&F new teak wood leg made to shape

Replacement of long rail of table dining 6 Persons with S&F new teak wood long rails made to shape

Replacement of long rail of table dining 4 Persons with S&F new teak wood long rails made to shape

Replacement of short rails with new teak wood short rails made to shape

S & F new Nylon Buffer of superior quality with suitable screws for fixing.

Polishing one coat to old and two coats to new surfaces to table dining 6 persons with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture.

All as per Srl item No 3.09 here-in-before but table dining 4 persons.

CHAIR EASY: FD-17(M) / 201 / 229 / 281, FD-1108 : Dismantle, take out carefully & replace old components of chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.: Qty - 140

Dismantling, taking out carefully old existing broken back leg of the chair easy of any description & replacement of the same with S&F new back leg of Ist class HW (TW) made to shape, fixed in position.

Replacement of front leg with S&F new front leg made out of Ist class HW (TW).

Replacement of side rail with S&F new side rail for seat made out of Ist class HW (TW) with holes for weaving. The spacing of holes shall match with the existing rail on other side.

Replacement of front & back rail for seat with S&F new front & back rail made out of Ist class HW (TW) with holes for cane weaving. The spacing of holes shall match with the existing rail on other side.

Replacement of side rail for back frame with S&F new side rails for back frames made out of Ist class HW (TW) with holes for cane weaving. The spacing of holes shall match with the existing rail on other side.

Replacement of top and bottom rail for back frame with S&F new top and bottom rail made out of Ist class HW (TW) with holes for cane weaving. The spacing of holes shall match with the existing rail on other side.

Replacement of front support rail with S&F new support rail made out of Ist class HW (TW).

Replacement of Arm rest with S&F new Arm rest made out of Ist class HW (TW).

Provn of new angular bracket with 04 Nos steel screws of suitable size of Ist class HW (TW) of size 75mm x 75mm x 25mm.

Recanning of Chair Easy of sorts with 2mm wide new plastic cane in Godrej pattern.

S & F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed.

Polishing one coat to old and two coats to new surfaces to Chair easy with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture.

TABLE BEDSIDE STEEL : FD/E6/MAP/15(R) S & F following components of table bed side including dismantling taking out carefully & replace old components of table bed side. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 495

Replacement of old existing broken top of table bed side of any description with S&F new table top of 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE.

All as per item 5.01 here in but for sides of table bedside.

S & F new legs to table bed side steel made of 18mm MS square pipe placed in position as shown in drg.

S & F new CP steel 100mm long handle to the drawers of the table bed side steel placed in position as shown in drg.

S & F new 6mm commercial ply at back of the table bed side steel fitted with screws as shown on drg.

Replacement of Upper drawer made out of 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:-Century or equivalant as approved by GE).

Replacement of Lower drawer made of 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:-Century or equivalant as approved by GE).

S & F new telescopic channel (Make :- Hettich/ Ozone/ Epco).

S & F new rubber shoes 18mm square of high quality placed in position as shown in drg.

Welding work wherever required as directed by EIC and GE.

M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the table bed side, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac).

TABLE WRITING : FD-33 / 249 / 275 Dismantle, take out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 90

Dismantling, taking out carefully & replacement of old existing broken top of Table of any description & replacement of the same with S&F new top of table with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE (Make:- Century or equivalant as approved by GE).

Replacement of shutters (complete) with S&F 18mm thick Rosewood/ Rosewood Prelaminated MDF exterior grade (Grade I, Type-II) ISI marked with 3mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE).

Replacement of TOP long rails with S&F new TOP long rail made out of Ist class Hard Wood (teak wood) complete all as shown on drgs, specified and directed by the Engr-in-Charge.

Replacement of TOP short rail with S&F new TOP short rail of made out of Ist class Hard Wood (teak wood) complete as shown on drgs, specified and directed by the EIC/GE

Replacement of drawer with knob Chromium plated 40mm dia with S&F complete new drawer made out of Ist class hard wood (teak wood) with knob Chromium plated 40mm dia as approved by GE complete all as shown on drgs, specified and directed by the EIC/GE

Replacement of Leg with S&F new Leg with made out Ist class MP (teak wood) complete all as shown on drgs, and directed by the Engr-in-Charge.

Replacement of bottom centre stiffener with S&F new bottom centre stiffener made out of Ist class Hard Wood (teak wood) complete all as shown on drgs, specified and directed by the Engr-in-Charge.

Replacement of bottom side stiffener with S&F new bottom side stiffener made out of Ist class Hard Wood (teak wood) complete all as shown on drgs, specified and directed by the Engr-in-Charge.

S & F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed.

Polishing one coat to old and two coats to new surfaces to Table Writing with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture.

CHARPOY IP HARD TOP : FD/MAP-II/01 S & F following components of charpoy including dismantling taking out carefully & replace old components of charpoy. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 300

S & F new 12mm thick commercial BWR Plywood of size 1916mm x 836mm fixed with nut and bolt (10 Nos). All as shown on drgs. (Make of Ply :- Greenply/ Century/ Duro)

Replacement of Long rails with S & F New Long rails of size 1980mm x 65mm x 25mm rectungular of 16 Gauge MS pipe

Replacement of short rails with S & F New short rails of size 900mm x 65mm x 25mm rectungular of 16 Gauge MS pipe

Replacement of leg with S & F New leg of size 440mm x 32mm x 32mm rectangular of 16 Gauge MS pipe

Replacement of Stiffner with S & F New Stiffner of size 836mm x 25mm x 25mm square of 16 Gauge MS pipe

Replacement of center Stiffner with S & F New center Stiffner of size 836mm x 25mm x 25mm square16 Gauge MS pipe

MS Clips for fixing of plywood size 60mm x 25mm x6mm thick and welded with frame of charpoy. All as shown on drgs.

Removing old UNSV 32mmx32mm rubber shoes from the legs of charpoy, S & F new 32mmx32mm rubber shoes to the legs of charpoy

Welding work wherever required as directed by EIC

M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chapoy IP hard top, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/ Berger/ Nerolac).

TEAPOY VERANDAH : FD/E6/MAP/17 S & F following components of Teapoy Verandah including dismantling taking out carefully & replace old components of Teapoy Verandah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 80

Replacement of old existing broken table top of any description with S&F new table top of 18mmthick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 3mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE).

S & F new 18mm sq MS pipe for legs of teapoy welded to adjacent part as shown in drg.

S & F new 5mm dia MS bars at base tray with proper welding with frame of tray as shown in drg.

Replacement of rubber shoe with S & F new hard rubber shoe of superior quality.

Welding work wherever required as directed by EIC and GE.

M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Teapoy Verandah MAP, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac).

TABLE COMPUTER : FD/E6/MAP/03 S & F following components of table computer including dismantling taking out carefully & replace old components of table computer. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 80

Replacement of old existing broken top of table computer of any description with S&F new table top of 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE).

All as per srl item No. 9.01 here-in-before but bottom shelf of Table computer.

All as per srl item No. 9.01 here-in-before but vertical board on side of Table computer.

All as per srl item No. 9.01 here-in-before but keyboard tray of Table computer.

All as per srl item No. 9.01 here-in-before but drawer of Table computer.

All as per srl item No. 9.01 here-in-before but pull out mouse tray of Table computer.

Removing of old U/S telescopic channel of key board and S & F new stainless steel telescopic channel to Table computer. (Make :- Hettich/ Ozone/ Epco)

S&F new knobs to Table computer.

S&F new handles to Table computer.

S&F new Nylon buffers to Table computer.

Welding work wherever required as directed by EIC and GE.

M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Table Computer paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac).

TABLE COMPUTER : FD/E6/MAP/03 S & F following components of table computer including dismantling taking out carefully & replace old components of table computer. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 80

Removing U/S damaged Seat & back of Chair writing. S & F new seat & back made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic mtr on Hampden machine. (Make of Ply :- Greenply/ Century/ Duro)

Removing old U/S arm rest of chair writing officer and S&F new arm made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed.

Taking out U/S /broken frame and S&F new frame as per drg duly painted as per drg and as directed by EIC.

Welding work wherever required as directed by EIC

Replacement of shoe with steel screws where required with S&F new rubber pads of superior quality with suitable Steel Screws complete all as shown on drgs specified & directed by the Engr-in- Charge.

M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chair Writing Officers (MAP) paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac).

SOFA SET TO SEAT 5 (3 seater +1 seater +1 seater) : (FD/MAP-II/02) : Dismantle, take out carefully & replace old components of sofa. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/ GE. Qty - 10 set

Taking out U/S rear legs and provn of new rear legs made of 1st class HW for sofa single/ three seater.

Taking out U/S front legs and provn of new front legs made of 1st class HW for sofa single/ three seater.

Taking out U/S short rails and provn of new rails made of 1st class HW for sofa single/three seater.

Taking out U/S long rails and provn of new long rails made of 1st class HW for sofa three seater.

Taking out U/S seat frame and provn of new seat frame made of 1st class HW including the horizontal wooden battens duly fixed with 12mm thick plywood BWR for sofa three seater. (Make of Ply :- Greenply/ Century/ Duro)

Taking out U/S seat frame and provn of new seat frame made of 1st class HW including the horizontal wooden battens duly fixed with 12mm thick plywood BWR for sofa single seater. (Make of Ply :- Greenply/ Century/ Duro)

Taking out U/S back frame and provn of new back frame made of 1st class HW including the horizontal wooden battens duly fixed with 12mm thick plywood BWR for sofa three seater. (Make of Ply :- Greenply/ Century/ Duro)

Taking out U/S back frame and provn of new back frame made of 1st class HW including the horizontal wooden battens duly fixed with 12mm thick plywood BWR for sofa single seater. (Make of Ply :- Greenply/ Century/ Duro)

Taking out U/S arm and provn of new arm made of 1st class HW.

Removing u/s cushion and provn of new cushion made of 100 mm thick 'PU' foam, 40 density, ISI marked (Make- Sleepwell/Godrej/Kurlon) of size 530mmx560mm and covered with best quality tapestry cloth of approved quality and colour (not less than Rs. 300/- per RM) duly wraped with long cloth of existing pattern. Rest as specified by Engineer-in-Charge/ GE.

Polishing one coat to old and two coats to new surfaces to Sofa three seater with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture.

All as per item No. 11.11 here-in-before but Sofa single seater.

S & F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed.

TV TROLLEY : FD/E6/MAP/04(R) Dismantle, take out carefully & replace old components of TV Trolley. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. Qty - 42

Removing of old/broken swivel type castors from bottom of TV trolley and S & F of new 50 mm dia swivel type castors wheel to TV trolley all as specified and directed. (Each set contain 04 dual wheels )

Removing of old U/S/broken top of TV Trolley and S&F new top of TV Trolley with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE).

All as per srl item No. 12.02 here-in-before but bottom of TV Trolley.

All as per srl item No. 12.02 here-in-before but side of TV Trolley.

All as per srl item No. 12.02 here-in-before but back of TV Trolley.

Removing of old broken glass shutters from TV trolley and S & F of new 5.5 mm thick glass shutters duly fixed with stainless steel fitting for fixing of glass shutters including magnetic catcher to existing TV trolley. All as per size and design shown on drg and as directed/approved. (make - Modi gurard/Saint Gobin)

Polishing one coat to old and two coats to new surfaces to TV Trolley with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture.

HAT STAND WITH MIRROR : FD-23(M) / 233 / 361 / 206 / 1110 Dismantle, take out carefully & replace old components of hat stand. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 60

M & L for replacement of Base made of 18/19mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 6mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE).

Brass pegs with screws size and shape as per drg.

Mirror 5.5 mm thick size as per drg (Make - Modi gurard/Saint Gobin)

Polishing one coat to old and two coats to new surfaces to hat stand mirror with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture.

BIN LINEN MULTIPURPOSE : FD/E6/MAP/09 Dismantle, take out carefully & replace old components of bin linen multipurpose. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. Qty - 150

Removing of old U/S top from bin linen multipurpose and S&F new top of bin linen multipurpose with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE).

Removing of old and U/S door shutters of bin linen multipurpose S&F new door of bin linen multipurpose with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE).

Removing of old U/S hingses and S & F new hinges to bin linen multipurpose as per size and design shown on drg complete all as specified and directed.

Removing of old broken handles and S & F of new chromium plated steel handles to bin linen multipurpose as per shown on drg and as directed.

Removing of old magnetic catcher and S & F of new magnetic catcher to bin linen multipurpose as per size and design shown on drg complete all as specified and directed. (Make:- Ebco/Hettich).

Removing of old U/S side and S & F new side made out of S&F new top of table with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE).

Removing of old U/S back ply of bin linen multipurpose and S & F new back ply of same size made out of 12mm thick commercial plywood (ISI marked) all as shown in drg and as directed. (Make of Ply :- Greenply/ Century/ Duro)

Replacement of U/S drawer with new drawer of same size and shape. Front of the drawer shall be made out of 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked as approved by EIC/GE and including handle Sides, base and back of drawer made out of 12mm thick ply wood (ISI marked) and fixing all as shown in drg including one coat of lacquer polish to old and two coats to new surfaces. (Make:- Century or equivalant as approved by GE).

Removing of old U/S leg from bin linen multipurpose and S & F new Ist class hard wood teak leg to side board all as shown on drg and as directed.

Polishing one coat to old and two coats to new surfaces to bin linen multipurpose with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture.

SIDE BOARD: FD-26(M) / 241 / 371 / 1112 Dismantle, take out carefully & replace old components of side board. Complete all as shown on drg, specified and directed by the Engineer-in-Charge/GE. Qty - 94

Removing of old U/S top from Side board and S&F new top of Side board with 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 3mm thick PVC edging of Make-Rehau/Pegasus/Kynex fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE).

Replacement of bottom & S & F new bottom

Replacement of side & S & F new side

Replacement of shelf with S&F 12mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked. Rest as specified in drg and directed by Engineer-in-Charge/ GE. (Make:- Century or equivalant as approved by GE).

Replacement of partition.

Replacement of back ply with S & F new 6mm thick plywood commercial both side Grade I (with BWR Resin). (Make of Ply :- Greenply/ Century/ Duro)

Replacement of Bottom long Stiffner with S & F new M.P. Teak Wood Stiffner

Replacement of Bottom short Stiffner with S & F new M.P. Teak Wood Stiffner

Replacement of Legs with S & F new M.P Teak Wood Legs

Replacement of knobs with S & F new 25 mm dia brasic CP complete.

Replacement of locks with S & F new locks brass (Make :- Godraj/ Harrison/ Nova)

Replacement of complete drawers with S & F new complete drawers (as per shown on drg) made of 1st class teak wood

Replacement of Piano type hinges with S & F new Piano type hinges light weight

Polishing one coat to old and two coats to new surfaces to Side Board with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture.

CHAIR DINING : FD-16(M) / 203 / 228 / 279: Dismantle, take out carefully & replace old components of chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 1560

Dismantling, taking out carefully of old existing broken back leg of the chair of any description & replacement of the same with S&F new back leg of Ist class HW (TW), made to shape, fixed in position.

All as per item 16.01 here in before but replacement of front leg with S&F new front leg made out of Ist class HW (TW).

All as per item 16.01 here in before but replacement of side rail with S&F new side rail made out of Ist class HW (TW) with holes for weaving. The spacing of holes shall match with the existing rail on other side.

All as per item 16.01 here in before but replacement of front or back rail with S&F new front or back rail made out of Ist class HW (TW) with holes for weaving. The spacing of holes shall match with the existing rail on other side.

All as per item 16.01 here in before but replacement of stiffener with S&F new stiffener made out of Ist class HW (TW) complete all as shown on drgs.

All as per item 16.01 here in before but replacement of back strip with S&F new back strip made out of Ist class HW (TW) complete all as shown on drgs.

Provn. of new angular bracket with 08 Nos steel screws suitable size of Ist class HW (TW) of size 75mm x 75mm x 25mm complete as approved and all as shown on drgs.

Recanning of chair Dining with 2mm wide new plastic cane in Godrej pattern.

S & F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed.

Polishing one coat to old and two coats to new surfaces to Chair Dining with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture.

NOTES FOR ALL ITEMS:-1). Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned, Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, welding, gluing, providing hinges, applying putty for leveled surface, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge. All furniture items is to be painted /poilshed only after making the entre item intact by tightening the joints.2). Work will be executed inside Barrack Store yard of GE West and at various sites/accommodations as per requirement.t is the responsibility of the contractor to lift the furniture from store godowns/sites/accommodations for repair and to keep it back in store godowns/sheds in a systematic manner. It is the part of CA and to be included in the quoted rates by contractor.4). All Timber shall be of 1st class fully seasoned hard TW free from knots and cracks.5). Prelaminated MDF board shall be exterior grade of approved make/brand and shall be confirm as per latest IS sepecifications.6). Commercial ply shall be BWR grade of approved make/brand and shall confirm to IS-303. 7). All other material to be incorporate in the work shall be of latest IS standard specification.8). Anti-termite and anti-bug treatment shall be done before polishing the wooden item.9). The Contractor has to submit purchase voucher and a manufacturer certificate for all the purchased materials while bringing materials to the site for execution of works.

SMS Enterprises

M P TYAGI ENGINEERS AND CONTRACTORS

M/s Krishna Construction Co.