Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹35.6 L+₹3.4 L (10.7%)Rejected-Finance | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹35.8 L+₹3.7 L (11.4%)Rejected-Finance R O IQBAL MARKET AALI MAJID EIDGAH SRINAGAR KASHMIR | SRINAGAR | JAMMU AND KASHMIR | 190001 | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹35.8 L+₹3.7 L (11.5%)Rejected-Finance HOUSE NO 87 SHAH FAISAL ABAD DHOBI MOHALLA BATAMALOO SRINAGAR 190009 | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190009 | L4 | Rejected-Finance Not being L1 | |
| 5 | L5₹37.1 L+₹5.0 L (15.6%)Rejected-Finance | L5 | Rejected-Finance Not being L1 |
Tender Value
₹43.5 L
EMD Value
₹87,016
Closing Date
21 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 133 WORKS ENGRS
HQ 133 WORKS ENGRS
SPL REPAIR TO BLDG NO P 217 OR OTM OF 7015 EME BN AT BB CANTT SRINAGAR UNDER GE 864 EWS
2023_MES_629187_1
CWEK-49/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE 864 EWS
Class D Category a i and b i
6 documents required · 6 mandatory
₹500
GE 864 EWS
₹87,016
HQ 133 WORKS ENGRS
2 Feb 2024
21 Nov 2023
29 Dec 2023
21 Nov 2023
21 Dec 2023
8 Dec 2023
21 Nov 2023 - 28 Nov 2023
29 Nov 2023
Amount
Dismantling plain or corrugated steel sheeting any gauge, thickness incl nainital or similar pattern roof-covering complete all as specified and directed by Engr-in-Charge.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
S &f Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
Dismantling timber scantlings 40 Sqcm and over in section, in unframed work in any position complete all as specified and directed by Engr-in-Charge.
S&F 2nd class soft wood clean sawn timber fixed in scantling complete all as specified and directed by Engr-in-Charge.
Fixing only 2nd class soft wood clean sawn timber fixed in scantling complete all as specified and directed by Engr-in-Charge.
Dismantling of wall and ceiling boards (fiber pulp, insulation, etc.) or unsulation boards/slabs, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.
S&F 6 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work commercial type as in ceiling fixed with nails complete all as specified and directed by Engr-in-Charge.
S&F 2nd class hard wood sec area exc3 & nexc 6 Sqcm plain fillets, square, rectangular in section, clean sawn, secued with nails or brads complete all as specified and directed by Engr_in_Charge.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engr-in-Charge.
S & F 40 mm thick, second class soft wood boarding clean sawn, planed one side with butt joints and fixed with nails in any situation as in planks etc complete all as specified and directed by Engr-in-Charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) n. exc 1.5 Sq.m each, complete all as specified and directed by Engr-in-Charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 square metre but n.exc 4 square metre each, complete all as specified and directed by Engr-in-Charge.
Taking down shutters of any description exc 1sqm but n. exc 2 sqm each complete all as specified and directed by Engr-in-Charge.
S&F 2nd class hardwood plain solid straight chowkhats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engr-in-Charge.
S&F 35 mm thick 2nd class soft wood plain framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board with commercial face veneers complete all as specified and directed by Engr-in-Charge.
S & F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commericial type on both sides and fixed to chowkat complete all as specified and directed by Engr-in-Charge.
S&F 35 mm thick 1st class soft wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze et (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section -8 , clause 8.24 (a) complete all as specified and directed by Engr-in-Charge.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling and fixing in opening as per specification and drawing complete all as specified and directed by Engr-in-Charge.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitabele PVC sheet beading and joined together with solvent cement suppling and fixing in the frame at site as per specification and drawing, complete all as specified and directed by Engr-in-Charge.
S&F butt hinges, medium weight cold rolled, mild steel of size 75 mm complete, complete all as specified and directed by Engr-in-Charge.
S & F aluminium bow handles, cast type, anodised size 125 mm complete, complete all as specified and directed by Engr-in-Charge.
S & F aluminium anodised barrel tower bolts of size 150 mm extruded section and fixed complete, complete all as specified and directed by Engr-in-Charge.
S & F aluminium anodised barrel tower bolts of size 200 mm extruded section and fixed complete all as specified and directed by Engr-in-Charge.
S & F aluminium bow handles, cast type, anodised size 200 mm complete all as specified and directed by Engr-in-Charge.
S&F butt hinges, medium weight cold rolled, mild steel of size 100 mm complete all as specified and directed by Engr-in-Charge.
S&F Aluminium alloy, anodised, sliding door bolt 300 mm in length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm incl wooden bedding, complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engr-in-Charge.
M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured , incl 15mm thick screed bed in CM 1:6 , complete all as specified and directed by Engr-in-Charge.
M&L for Glazed ceramic coloured tiles in vertical surfaces 450mm x 300mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in Cement mortar 1:3 complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete (unreinforced) in ground floors and in pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.
M & L 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed by Engr-in-Charge.
S & F 20 mm thick, second class soft wood boarding clean sawn, planed one side with butt joints and fixed with nails in any situation as in eaves board, etc complete all as specified and directed by Engr-in-Charge.
S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc. 0.5 Sqm in each pane, complete all as specified and directed by Engr-in-Charge.
Dismantling stone slabs and tiles of any description or thickness in floors/wall etc laid bedded and pointed in any mortar complete all as specified and directed by Engr-in-Charge.
M & L Machine cut kota stone slab flooring 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 15mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry @ 2 Kg per square complete all as specified and directed by Engr-in-Charge.
M & L Machine cut kota stone slab flooring 20 - 25 mm thick in riser of steps, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and including 10mm thick bedding layers in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.
M & L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge.
M & L 75 mm thick PCC 1:4:8 Type D2 ( 40 mm graded aggregate) as in sub base to floors complete all as specified and directed by Engr-in-Charge.
M&L machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade and no pigment complete all as specified and directed and no pigment complete all as specified and directed by Engr-in-Charge.
M&L for preparation of slab and sides of the wall by rubbing washing and removing the loose particles and then applying two coats of DR Fixit roof seal 148 at water tank portion Roof traeat ment complete all as specified and directed per manfacture instruction complete all as specified and directed by Engr-in-Charge.
supply oniy integral waterproofing compound complete all as specified and directed by Engr-in-Charge.
M & L PCC 1 : 4 : 8 Type D2 ( 40 mm graded aggregsate) as in foundation and mass concrete complete all as specified and directed by Engr-in-Charge.
S&F in repair steel water tubing 50 mm dia 'medium grade', galvanised, with all fitting and fixed complete to as spout in sunken portion complete all as specified and directed by Engr-in-Charge.
Demolition of brick work built in cement mortar complete all as specified and directed by Engr-in-Charge.
M & L brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM 1 : 4 in half brick thick walls complete all as specified and directed by Engr-in-Charge.
M&L Rendering 15mm thick in cement mortar (1:6) externally & finishing the surface even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L Rendering 15mm thick in cement mortar (1:4) internally & finishing the surface even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M & L preparing surface of newly plastered walls and applying two coats of oil bond distemper over chalk whitening preparatory to distempering complete all as specified and directed by Engr-in-Charge.
M&L Preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engr-in-Charge.
M & L preparing old surface of walls and applying one coats of oil bond distemper complete all as specified and directed by Engr-in-Charge.
M&L Preparing old surface of walls and applying two coats of cement base paint complete all as specified and directed by Engr-in-Charge.
Taking up or down 15mm dia steel tubing and connection, including cleaning for re-fixing or removal to store complete all as specified and directed by Engr-in-Charge.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20 mm dia complete all as specified and directed by Engr-in-Charge.
S & F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge.
S & F 20 mm dia GI tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge.
S & F lagging and wrapping for pipes 15mm bore used in internal water supply or plumbing all around with 25mm thick bonded mineral wool performed SNAPON pipe sections of density 144kg/cum conforming to is-9842 complete all as specified and directed by Engr-in-Charge.
S & F lagging and wrapping for pipes 20mm bore used in internal water supply or plumbing all around with 25mm thick bonded mineral wool performed SNAPON pipe sections of density 144kg/cum conforming to is-9842 complete all as specified and directed by Engr-in-Charge.
S&F in repairs bib tap cast copper alloy chromium plated fancy type long body with capstan haed handle screwed down high pressure screwed for iron pipe or for brass ferrule of bore 15mm complete all as specified and directed by Engr-in-Charge.
S & F in repair Stop valves, 15mm bore cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engr-in-Charge.
S&F in repairs 500 litres capacity rotational moulded polythene water storage tanks (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I complete all as specified and directed by Engr-in-Charge.
S&F 20mm bore ball brass valves high pressure, with polythene float & fly nuts complete, screwed for iron pipe or brass ferrule complete all as specified and directed by Engr-in-Charge.
S&F in repair CP centre hole single lever basin mixer fancy type for WHB/wall/sink with double action for hot/Cold water complete all as specified and directed by Engr-in-Charge.
S&F in repairs Vitreous China wash basin, size 550 x 400mm, white, flat back, with waste, coupling, chain and plug and porcelean stopper & backets including cutting for and pinning in ends of brackets complete all as specified and directed by Engr-in-Charge.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge.
S&F 10 litre capacity PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed by Engr-in-Charge.
S&F in repairs, vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), with integral foot rest including provision of lime concrete bedding, connection to trap and anti syphonage pipe etc complete including making good to floor complete all as specified and directed by Engr-in-Charge.
Taking down eaves gutter rain water pipes or soil watse and vent PVC pipes including all fittings like shoes, bends, swan necks etc of any dia complete all as specified and directed by Engr-in-Charge.
S&F 75mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or floor fixed as in repair complete all as specified and directed by Engr-in-Charge.
S&F 100mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or floor fixed as in repair complete all as specified and directed by Engr-in-Charge.
S&Fin repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.
S&F in repair 75mm dia PVC (SWR) bends any radius with oval access door complete all as specified and directed by Engr-in-Charge.
S&F in repair 110mm dia PVC (SWR) bends any radius with oval access door complete all as specified and directed by Engr-in-Charge.
S&F 100mm cast iron soil, Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engr-in-Charge.
Demolition and breaking up drain 150mm pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed by Engr-in-Charge.
S&F 150 mm dia reinforced concrete pipes, class NP2 with collar per length of pipe laid in trenches complete all as specified and directed by Engr-in-Charge.
M & L PCC 1 :3:6 Type C2 ( 40 mm graded aggregate) as in bed to drain pipes 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and directed by Engr-in-Charge.
M & L Precast RCC 1 : 2 : 4 Type B1 ( 20 MM graded aggregate) as in cover slab (for manholes etc), chajjas, mangers, shelves etc. set in cm 1 : 6 complete with joints to math complete all as specified and directed by Engr-in-Charge.
S & F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia but in stiroups complete all as specified and directed by Engr-in-Charge.
S & F TMT steel bars 6 to 8 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia complete all as specified and directed by Engr-in-Charge.
S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks & similar work con-forming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-Charge.
M&L for taking down carefully existing old burnt out / unserviceable aluminium / copper point wiring system any type/ size and any description complete for light, fan,bell,socket, power points etc including removing the all type of fittings & fixture alongwith it connected fixing acessories such as all switches, sockets, ceiling roses, holder,regulators,bell etc and removing of all the old materials from the site for to taking as a schedule of credit complete all as specified and directed by Engr-in-Charge.
M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall or concealed in wall (Type of wiring laying work decided by and as directed by EIC) with the help of heavy duty ISI mark PVC casing capping strip / PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of pressed steel terminal sunken boxes 1.6 mm thick or heavy duty PVC box and duly fixed it concealed in wall or surface on wall and overed to top with electro plated 3 mm thick plastic laminated sheet for housing/mounting of switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc complete all as specified and directed by Engr-in-Charge.
Description complete all as per above sr item No 89 but one light point / fan point wiring system controlled by one way switch complete all as specified and directed by Engr-in-Charge.
Description complete all as per above sr item No 89 but one 5 Amp socket outlet point wiring system fixed on same board & controlled by one way switch complete all as specified and directed by Engr-in-Charge.
Description of all as per above sr item No 89 but one 5 Amp socket outlet point wiring system fixed on independent board & controlled by one way switch complete all as specified and directed by Engr-in-Charge.
Description of all as per above sr item No 89 but using PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring system and also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system complete all as specified and directed by Engr-in-Charge.
Supply and fixing of switch paino of 5/6 Amps 220 Volts AC, complete all as specified and directed by Engr-in-Charge.
Supply and fixing of socket of 5/6 Amps 220 Volts AC 3/5 multi pin type complete all as specified and directed by Engr-in-Charge.
Supply and fixing of switch of 15/16 Amps 220 Volts AC complete all as specified and directed by Engr-in-Charge.
Supply and fixing of socket of 15/16 Amps 220 Volts AC 5/6 multi pin type complete all as specified and directed by Engr-in-Charge.
Supply and fixing of ceiling rose three terminals base type made out of polycarbonate isolated body complete all as specified and directed by Engr-in-Charge.
Supply and fixing of fan regulator with having hum free step type alongwith speed control know of capacity 120 watt single phase complete all as specified and directed by Engr-in-Charge.
Supply and fixing of wall mounted slim batten type decorative integrated design LED tube light fitting of rating capacity in 1x 20W/22W ,6500 K 2000with eletronic driver and fitting extruded body made of aluminum housing with high quality polycarbonate diffuser with long life energy saving and required fitting use in both warm/white type colour set all also providing suitable type of flate fexible two/three core cable and making electric connection and including taking down of old fitting complete all as specified and directed by Engr-in-Charge.
M& L for taking down carefully existing ceiling fan / wall fan/Exhaust fan any type sweep and removing fan blade including cleaning all dust particles and filling cavities with filler material, oiling ,greasing including painting fan with blade complete one coat of synthetic enamel white paint by spraying and assemble the same along with all connecting fixing accessories like rubber rell, nut ,bolt ,washer,lock pin etc and hanging the same position along with all electrical wire connection complete all as specified and directed by Engr-in-Charge.
M& L for taking down carefully existing storage water heater any type any size and removing pvc connection including cleaning of inner tank and assembly and filling cavities with filler material, including painting geyser with mounting base complete one coat of synthetic enamel white paint by spraying and assemble the same place along with all connecting fixing accessories like fastner/ nut ,bolt ,washer,PVC connection and Valve etc and hanging the same position along with all electrical wire connection complete all as specified and directed by Engr-in-Charge.
Supply & fixing of ventilating exhaust fan made out of sturdy high quality engineering plastic, complete with louvers,and shutter operational of size 250mm sweep suitable to work on 230 Volts 50 Hz, 1200 RPM, coper winding including making of suitable type /size of hole on wall complete all as specified and directed by Engr-in-Charge.
Supply and fixing of decorative profile wall mounted LED mirror light fitting 20 Watt 6500 K of size 57.5 CM long or 2 fit long with aluminium chanel environmental friendly energy efficient and long life energy saving and required fitting use in both warm/white type colour set all as per make of Havells & model -LHEXARP7IN1W020 or equivalent specification and model & make of Philips /Crompton complete set complete set and including providing of suitable type of flate fexible two/three core cable and makong electric connection and including taking down of old fitting complete all as specified and directed by Engr-in-Charge.
Supply and fixing of sub main wiring system with PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size/type of single core 2 run of 6 Sqmm and 1run of 6 Sqmm FRLS (Nominal area) ISI Marked drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed in wall or surface on wall including and making electrical connection & including taking down old unservicable sub main wiring system complete all as specified and directed by Engr-in-Charge.
Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type for vertical type distribution board of rating VTPN 4 way type 415 volt 3 phase AC supply holding system with IP-43 1K-09 protection rating with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding of MCCB as incommer and MCB as outgoing system alongwith providing in side of box of 01No MCCB TPN 160 Amps with breaking rupting capacity 25 KA and having adjustable setting type and also providing of 12 Nos of MCB SP 63 Amps 10KA 'C' curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical connection including taking down of existing DBs complete all as specified and directed by Engr-in-Charge.
Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 8 way type 220 volt AC supply system with IP-43 protection rating with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical connection including taking down of existing DBs complete all as specified and directed by Engr-in-Charge.
Supply and fixing of MCB SPN 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete including taking down of old MCB complete all as specified and directed by Engr-in-Charge.
Supply and fixing of MCB SP 10 to 32 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete including taking down of old MCB complete all as specified and directed by Engr-in-Charge.
Supply and lay GI pipe 40 mm bore medium grade with all fitting laid in trenches/ under road /floor/ pole/ wall for protection of cable including providing clamping arrangment for holding of pipe on pole/wall in proper size of clamps, nut bolt ,and washer etc complete all as specified and directed by Engr-in-Charge.
Supply , laying and testing of LT cable XLPE insulated screened,PVC bedded galvanized steel strip or wire armoured electric power cable ( heavy duty ) with aluminium conductor 1100 volt grade cross section area of size 50 sqmm 4 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size complete all as specified and directed by Engr-in-Charge.
M&L for excavation in trenches/ under road/ PCC path/hard standing not exc. 1.5 m wide and n. exc. 1.5m depth for laying of pipe / cable in any type of soft /loose soil and getting out etc complete all as specified and directed by Engr-in-Charge.
M&L for sand cushioning for under ground cable provided with a layers of sand before laying cable and sand after laying and stretching the cable complete all as specified and directed by Engr-in-Charge.
M&L for brick covering width equal to length of brick for mechanical protection to cable with well burnt sub class 'B' bricks laid dry flatcomplete all as specified and directed by Engr-in-Charge.
M&L for returning filling in including, spreading, leveling and well ramming in layers not exceeds 25 cm thick in any type of soil complete all as specified and directed by Engr-in-Charge.
M&L for removing excavated material to a distance not exceed 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.
Supply and lay GI pipe 50 mm bore medium grade with all fitting laid in trenches/ under road /floor/ pole/ wall for protection of cable including providing clamping arrangment for holding of pipe on pole/wall in proper size of clamps, nut bolt ,and washer etc complete all as specified and directed by Engr-in-Charge.
Supply and fixing of environmental friendly LED street light fitting of rated capacity 45Watt out door type made out of pressure die cast hosing with glass and high performance polycarbonate optics with LEDs with drives and having IP 65/66 protection and surge to heat resistant sink for better heat dissipation and including to ready for use and required in both warm/white coluor type fixture complete set including providing of suitable size of dia GI pipe light grade bracket and it to match/setting the new fitting fixture hole attechment system of suitable bracket length upto 1.2 mtr long and make to shape / bend of 120 degree angle including duly fixed alongwith existing pole /bldg wall/ roof with the help of 02 Nos of MS fixing clamp alongwith nut bolt and including providing of suitable type of flate fexible two/three core cable and makong electric connection and including taking down of old fitting complete all as specified and directed by Engr-in-Charge.
M&L for earthing work complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil all as shown in Electrical Plate No 3 of SSR part -I. and also making arrangment of 20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh,and also including provision of concrete pit cover framing work in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and outer frame work of angle iron 25x25x6mm with top concrete pit cover and handle for lifting of cover complete all as specified and directed by Engr-in-Charge.
M/S Ghulam Mohammad Shalla
M/S SHIMAR STAR GLACIER
M/s Lal Enterprises
M/S BASHIR AHMAD MIR
M/S Tajamul Ah Buchh
M/S NORTHERN ELECTRICAL WORKS
M/S REDLY ENGINEERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .