REPAIR AND MAINT OF WOODEN FURNITURE UNDER BSO OF GE (EAST) JABALPUR

Amount

Bed Plywood Top (Drawing No FD-247) : Removing old damaged/unserviceable head rest of bed plywood top and supply & fixing new head rest (of suitable size),4.0 mm thick one side teak faced and other side commercial plywood including prepration of surface complete all as specified and directed by GE/E-in-Charge.

ditto all as per item No 1 above but unserviceable foot rest complete all as specified and directed by GE/E-in-Charge.

ditto all as per item No 1 above but removing old damaged/unservice-able long rails of bed plywood top. Supply and fixing new long rails made of Ist class hard wood (MP teak) minimum size 1920x100x35 mm surface complete all as specified and directed by GE/E-in-Charge.

ditto all as per item No 1 above but removing old damaged plywood top and supply and fixing new ply wood of suitable size, 12 mm thick BWR type, ISI mark Make of ply wood Archid /Green Ply/Centure (minimum size 6’ x 3’) as per drawing all as specified and directed by GE/E-in-Charge.

ditto all as per item No 1 above but removing old damaged stiffner 40mmx60mm and supply and fixing new stiffner of teak wood Ist class suitable size as per drawing all as specified and directed by GE/E-in-Charge.

ditto all as per item No 1 above but removing old damaged Leg and supply and fixing of new leg of length 660mm of section 60mm x 30mm from 400mm to 660mm and section 60 x60 at 400mm and 30 x30 at bottom of the leg of teak wood Ist class suitable size duly fixed and fixing of one side teak face ply wood 4 mm on B/S after reparing all as specified and directed by GE/E-in-Charge

ditto all as per item No. 1 but removing old damaged leg at the foot and supply and fixing new leg of length 500 mm of section 60mm x30mm from 500mm to 400mm and section 60x60 at 400mm and 30x30at bottom of the leg of teak wood Ist class suitable size as per drawing all as specified and directed by GE/Eng-in-Charge.

M&L for Painting of the MNF set with two coats of synthetic enamel paint of superior quality of black colour after preparation of the surface of MNF set as specified and diected by GE/E-in-Charge.

ditto all as per item No. 1 but supply and fixing new corners of suitable size at the point of joining rail with legs teak wood Ist class so that all joints be stiff/tighten and play be stopped as specified and directed by GE/Eng-in-Charge.

Chair Dining (Drawing Nos FD-16, 279, 228, 203 & Fd/Map-II/05): Taking out old broken unserviceable front leg of chair dining and supply & fixing new front leg of suitable size, made of Ist class hard wood (MP teak) including preparation of surfaces complete all as specified and directed by GE/E-in-Charge.

ditto all as per item No 10 above but rear legs complete.

ditto all as per item No 10 above but side rails complete.

ditto all as per item No 10 above but rear rails complete.

ditto all as per item No 10 above but front rails complete

ditto all as per item No 10 above but side stiffeners complete

ditto all as per item No 10 above but center stiffeners complete.

ditto all as per item No 10 above but Back Rest stiffeners.

ditto all as per item No 10 above but removing old damaged PVC seat and supply and fixing of new PVC Seat complete

Replacement of old unserviceable PVC buffers of item no 10 and supply and fixing PVC buffers/rings as per existing size of suitable for chair dinning size as directed by GE/E-in-Charge

Chair writing (Drawing No FD-250, 280) :- Taking out old broken unserviceable front leg of chair writing and supply and fixing new front leg of suitable size, made of Ist class hard wood (MP teak) complete.

ditto all as per item No 20 above but rear legs complete

ditto all as per item No 20 above but side rails complete

ditti all as per item No 20 above but rear rails complete.

ditto all as per item No 20 above but Front rails complete

ditto all as per item No 20 above but side or center stiffeners complete

ditto all as per item No 20 above but adjustment and tightening of chair to make all joints stiff as specified and directed by GE/E-in-Charge.

ditto all as per item No 20 above but Back Rest complete

ditto all as per item No 20 above but arm rest complete.

Replacement of old unserviceable PVC buffers of item no 20 and supply and fixing PVC buffers/rings as per existing size to chair writing as directed by GE/E-in-Charge.

Chair Wooden Bottom (Drawing No FD- 56, 225, 285): Taking out old broken u/s front leg of chair, supply & fixing new front leg of suitable size, made of Ist class hard wood (MP Teak) as specified and directed by GE/E-in-Charge.

ditto all as per item No 30 above but rear leg complete.

ditto all as per item No 30 above but side rails complete.

ditto all as per item No 30 above but rear rail complete.

ditto all as per item No 30 above but front rail complete.

ditto all as per item No 30 above but side stiffeners complete

ditto all as per item No 30 above but centre stiffeners complete.

ditto all as per item No 30 above but supply & fixing with suitable wood screws new seat of 6 mm thick BWR grade plywood complete in replacement of old broken specified and directed by GE/E-in-Charge.

ditto all as per item No No 30 above but back rest complete.

Replacement of old unserviceable PVC buffers item no 30 and supply and fixing PVC buffers/rings as per existing size to chair wooden bottom as directed by GE/E-in-Charge

ditto all as per item No 30 above but adjustment and tightening all joints as specified and directed by GE/E-in-Charge.

Chair Easy (Drawing No FD-229):- Taking out old broken unserviceable front leg of chair easy and supply & fixing new front leg of suitable size made of Ist class hard wood (MP Teak) specified and directed by GE/E-in-Charge.

ditto all as per item No 41 above but rear leg complete.

ditto all as per item No 41 above but front or rear rail of seat complete.

ditto all as per item No 41 above but adjustment and refixing so as to make stiff all joints as specified and directed by GE/E-in-Charge.

ditto all as per item No 41 above but top rail of back complete

ditto all as per item No 41 above but bottom rail of back complete.

ditto all as per item No 41 above but arm complete.

ditto all as per item No 41 above but side rail of seat complete.

Replacement of old unserviceable PVC buffers of item no 41 and supply and fixing PVC buffers/rings as per existing size to chiar easy as directed by GE/E-in-Charge

Table Peg (Drawing No FD- 25, 236, 277):- Taking out old broken unserviceable leg of table peg and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) complete all as specified and directed by GE/E-in-Charge.

ditto all as per item No 50 but taking out broken/unserviceable table top of table peg and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated MDF board, exterior grade of suitable size, one side with teak shade and balancing white lamination on other side with and including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and headless pins complete.

ditto all as per item No 50 above but top side rail complete.

ditto all as per item No 50 above but bottom rail complete.

Replacement of old unserviceable PVC Buffers/Rings item no 50 and supply and fixing PVC buffers/rings as per existing size to table peg as directed by GE/E-in-Charge

Table Centre (Drawing No FD-29, 274, 235): Taking out old broken unserviceable leg of table centre and S&F new suitable leg made of 1st class hard wood (MP Teak) of suitable size complete all as specified by GE/E-in-Charge.

ditto all as per item No 55 but taking out broken/un-serviceable top of table centre and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated MDF board, exterior grade of suitable size, one side with teak wood shade and balancing white lamination on other side including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and headless pins complete all as specified.

ditto all as per item No 55 but broken long rail complete.

ditto all as per item No 55 above but short rail complete.

ditto all as per item No 55 above but broken side stiffener complete.

ditto all as per item No 55 above but supply and fixing of center stiffner 20 mm x 50 mm joining the two side stiffner to make joints stiff irrespective of what is shown in the drawing and as directed by GE/E-in-Charge.

Replacement of old unserviceable PVC buffers and supply item no 55 and fixing PVC buffers/rings as per existing size to table center as directed by GE/E-in-Charge

Teapoy (Drawing No FD- 64, 232, 278, 682) : Taking out old unserviceable leg of teapoy and S&F new suitable leg made of 1st class hard wood (MP Teak) of suitable size including preparation of new surfaces complete all as specified.

ditto all as per item No 62 but taking out broken/un-serviceable top of teapoy and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated MDF board, exterior grade of suitable size, one side with teakwood shade and balancing white lamination on other side with and including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins complete all as specified.

ditto all as per item No 62 but unserviceable top long rail.

ditto all as per item No 62 but unserviceable bottom rail.

Replacement of old unserviceable PVC buffers and S & F PVC buffers/rings as per existing size to Teapoy as directed by GE/E-in-Charge

Table Dining 6/8 Person (Drawing No FD- 30, 239, 273, 376):- Taking out old unserviceable leg of table dining and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size complete all as specified and directed by GE/E-in-Charge.

ditto all as per item No 67 but unserviceable long rail of suitable size complete.

ditto all as per item No 67 but unserviceable short rail of suitable size complete.

ditto as per item No 67 but taking out un-serviceable table top of table dining (6/8persons), supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated MDF board, exterior grade, one side with teakwood shade and balancing white lamination on other side including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins as specified and directed by GE/ E-in-Charge.

ditto all as per item No 67 but unserviceable 100mm x 25mm stiffners below the top and supply and fixing the new stiffner of suitable size in dovetail joint between long rails size complete as directed by GE/Engr-in-charge.

Supply and fixing in replacement of teak wooden coners of 50'x50'x40' size joining legs with top rails to make stiff joints complete all as specified and directed by GE/E-in-Charge.

Replacement of old unserviceable PVC buffers and S & F PVC buffers/rings of size 20mm dia and 15mm height to table dinning 6/8 person as directed by GE/E-in-Charge

Table Dining 4 Person (Drawing No FD/Map-II/03 ):- Taking out old unserviceable leg of table dining and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of surface and applying high gloss all as specified and directed by GE/E-in-Charge.

ditto all as per item No 74 but unserviceable long rail of suitable size complete.

ditto all as per item No 74 but unserviceable short rail of suitable size complete.

ditto as per item No 74 but taking out un-serviceable table top of table dining (6/8persons), supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated particle board, exterior grade, one side with teakwood shade and balancing white lamination on other side including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins directed by GE/ E-in-Charge.

Replacement of old unserviceable PVC buffers and S & F PVC buffers/rings of size 20mm dia and 15mm height to table dinning 6/8 person as directed by GE/E-in-Charge

Table 3' X 2' with Drawer (Drawing No FD- 283, 224): Replacement of leg of table 3’X2’ with drawer and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size complete all as specified and directed by GE/Engr-in-Charge.

ditto all as per item No 79 but unserviceable long rail complete.

ditto all as per item No 79 but unserviceable short rail complete.

ditto all as per item No 79 but unserviceable bottom rail complete.

ditto all as per item No 79 but unserviceable bottom of drawer with 6mm plywood BWR of suitable size complete.

ditto as per item No 81 above but replacement un-serviceable table top of table 3’X2’ with drawer and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated MDF board, exterior grade, one side with teak wood shade and balancing white lamination on other side with and including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins duly given directed by GE/E-in-Charge..

ditto as per 81 above but S & F in replacement of 25mm x 25mm section track rail with grooves of 12mm x12mm in section complete all as specified and directed by GE/E-in-Charge.

ditto as per 81 above but S & F in replacement of front of drawer of suitable size with 18mm thick prelaminated MDF board exterior grade teak wood shade complete with knob duly fixed complete all as specified and directed by GE/Engr-in-Charge..

ditto as per 81 above but S & F in replacement of drawers made to size as per drawing complete all as specified and directed by GE/Engr-in-Charge.

Replacement of old unserviceable PVC buffers and S & F PVC buffers/rings of size 20mm dia and 10mm height to Table 3'x2' with drawer as directed by GE/Engr-in-Charge

Table 3' X 2' without Drawer (Drawing No FD- 284, 223): Taking out old unserviceable leg of table 3’X2’ without drawer and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of surface complete all as specified and directed by GE/E-in-Charge.

ditto all as per item No 89 but unserviceable long rail complete.

ditto all as per item No 89 but unserviceable short rail complete.

ditto all as per item No 89 but unserviceable short stiffner/bottom rail complete.

ditto as per item No 89 above but replacement un-serviceable table top of table 3’X2’ without drawer and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated MDF board, exterior grade, one side with teak wood shade and balancing white lamination on other side with and including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins directed by GE/E-in-Charge..

Replacement of old unserviceable PVC buffers and S & F PVC buffers/rings of size 20mm dia and 10 mm height for Table 3'x2' without drawer as directed by GE/E-in-Charge

Table Dressing Ladies (Drawing No FD- 32, 251,378 & Map): Taking down old unserviceable looking mirror of table dressing ladies and S&F new looking mirror 5 mm thick of suitable size complete all as specified. (Make:-Modi Guard/Saint Gobain).

Dittto as per item no 95 but the complete box with drawer of table dressing ladies of size and specification as directed by E-in- charge.

Ditto as per item No 95 but S&F in Replacement of old and unserviceable teak wood beanding & 6mm thick ply at the back of the mirror of dressing table with 6mm thick ply BWR suitable size fixed with teak wood beadiang screws as specified and directed by GE/E-in-Charge.

Table Dressing Gents (Drawing No FD-31, 230, 278, DB- 3980 & Map):- Taking down unservicable looking mirror of table dressing gents and S&F new looking mirror 5 mm thick of suitable size complete all as specified. (Float glass Make:-Modi Guard/Saint Gobain).

ditto all as per above item No 98 but supply and fixing in replacement of knob as approved by GE/Eng-in-Charge

Dittto as per item no 98 but the complete box with drawer of table dressing gents of size and specification as directed by E-in- charge.

Ditto as per item No 98 but S&F in Replacement of old and unserviceable beading & 6mm thick ply at the back of the mirror of dressing table with 6mm thick ply BWR suitable size fixed with teak wood beading and screws as specified and directed by GE/E-in-Charge.

Table Bed Side (Drawing No FD- 28, 276, 210, DB- 3956, 4049&Map) : Taking out old unserviceable side of table bed side and S&F new side of suitable size made of 18 mm thick pre- laminated MDF board, exterior grade, one side with teak shade fixed with 4mm x18mm teak wood beading to the front side and bottom of side. Further fixing two PVC rings at the bottom of each side. All as specified and directed by GE/E-in-Charge.

Ditto all as per item No 102 above but taking out old unserviceable bottom and S&F new bottom of suitable size made of 18 mm thick pre- laminated MDF board, exterior grade,one side with teak shade and bottom shall be covered with 4mm size teak wood beading fixed with panel pins on front sides complete all as specified and directed by GE/E-in-Charge.

ditto all as per item No 102 above but S&F in replacement of top made of 18 mm thick pre- laminated MDF board, exterior grade of suitable size, one side with approved shade of suitable size complete all as specified and directed by GE/E-in-Charge.

ditto all as per item No 102 above but taking out old unserviceable Center shelf of table bed side and supply and fixing new center shelf of suitable size, made out of 12 mm thick pre- laminated MDF board, exterior grade, one side with teakwood shade fixed with 4mm thick beading on the front complete.

ditto all as per item No 102 above but taking out old U/S back of table bed side and supply and fixing new back made out of 6 mm thick BWR (Boiled water resistance) grade plywood of suitable size complete.

Table Writing/Table writing JCO Modified (Drawing No FD- 249, 275 DB 3959):- Taking out old unserviceable leg of table writing and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size complete.

ditto all as per item No 107 but unserviceable side stiffener complete.

ditto all as per item No 107 but unserviceable centre stiffener complete.

ditto all as per item No 107 but taking out un-serviceable table top of table writing and S&F new table top of suitable size, made of 18 mm thick pre-laminated MDF board, exterior grade teakwood shade and including all round teak wood beading of 4 mm x 18 mm fixed with adhesive specified by GE/Engr-In-Charge.

ditto all as per item No 107 but Taking out old unserviceable top long rails of table writing and supply & fixing new long rail of suitable size made of Ist class hard wood (MP Teak) including preparation of new surfaces complete. as as directed and specified by GE/Engr-In-Charge.

ditto all as per item No 107 but unserviceable lock and S & F of SS locks 50 mm four levers ISI marked as approved by GE/E-in-Charge.

ditto all as per item No 107 but replacement shutter of table writing and S&F new shutter of suitable size complete on all respect , made of 18 mm thick pre-laminated MDF board, exterior grade teakwood shade and including fixing of teak wood beading of 4 mm x 18 mm with adhesive and panel pins on three sides and 10mm x 18mm on the fourth wherein shutter is to be fixed with piano hinge of medium quality to the cabinet directed by GE/E-in-Charge. .

ditto all as per item No.107 but S&F in replacement of side of cabinet with 18mm thick prelaminated MDF board of suitable size as directed by GE/Eng-in-Charge

ditto all as per item No.107 but S&F in replacement of shelf with 18mm thick prelaminated particle board of suitable size as existing directed by GE/Eng-in-Charge

ditto all as per item No.107 but S&F in replacement of bottom of cabinet with 18mm thick prelaminated mdf board of suitable size as existing directed by GE/Eng-in-Charge

ditto all as per item No.107 replacement of old unserviceable knobs and supply and fixing by teak wood finished knobs with machine screw and washer of approved quality by GE/E-in-Charge

ditto all as per item No.107 replacement of old unserviceable PVC buffers and supply item no 116 and fixing by screw PVC buffers/rings as per existing size for Table writing as directed by GE/E-in-Charge

Sofa Set 5 Seater (Drawing No FD- 373, 281):- Taking out old Unservicable arm of sofa set 5 seater and S&F new arm of suitable size made out of Ist class hard wood (MP Teak) including preparation of new surfaces complete.

ditto all as per item No 119 above but broken front leg complete.

ditto all as per item No 119 above but broken rear leg complete.

ditto all as per item No 119 above but broken long rail complete.

ditto all as per item No 119 above but broken side rail complete.

ditto all as per item No 119 above but unservicable wooden bearers complete.

ditto all as per item No 119 above but S & F in replacement of wooden rail 30mm x 50mm between back legs to support back frame complete as directed by GE/E-in-Charge .

ditto all as per item No 119 above but removing old unserviceable cushion compete as per shape & size ref in drg with coolgels-particle PU foam of size 22''x21''x100/95 mm (Make Sleepwell product Cool Gel-s/Godrej) with upholstery of tapestry cloth of range not less than 450/- meter of shade colour approved by GE/Engr-in-charge and stiched with chain over provided cushion duly stiched with lining cloth shall be provided

Sofa Single Seater (FD-281):- Taking out old Unservicable arm of sofa single seater and S&F new arm of suitable size made out of Ist class hard wood (MP Teak) complete.

ditto all as per item No 127 above but broken front leg complete.

ditto all as per item No 127 above but broken rear leg complete.

ditto all as per item No 127 above but broken front rail of the seat complete.

ditto all as per item No 127 above but unservicable wooden bearers complete.

ditto all as per item No 127 above but broken side rail of the seat complete.

ditto all as per item No 127 above but removing old unserviceable cushion compete as per shape & size ref in drg with coolgels-particle PU foam of size 22''x21''x100/95 mm (Make Sleepwell product Cool Gel-s/Godrej) with upholstery of tapestry cloth of range not less than 450/- meter of shade colour approved by GE/Engr-in-charge and stiched with chain over provided cushion duly stiched with lining cloth shall be provided

ditto all as per item No 127 above but S&F in replacement of wooden 30mm x 50mm between back legs to support back frame complete as directed by GE/E-in-Charge .

Side Board (Drawing No FD- 26, 241, 371, 372):- Taking out old broken unserviceable leg of side board and supply & fixing new leg made of 1st class hard wood (MP Teak) of suitable size including preparation of new surfaces complete all as specified.

ditto as per item No 135 above but front and rear long stiffener complete

ditto all as per item No 135 above but side stiffener complete

ditto all as per item No 135 taking out old unserviceable back ply of side board and supply & fixing new back made out of 6 mm thick BWR grade ply wood of suitable size complete

ditto all as per item No 135 taking out broken/unserviceable top/bottom of side board and supply & fixing new top of side board suitable size, made of 18 mm thick pre-laminated MDF board and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins complete

ditto all as per item No 135 above but S & F in replacement of shutter complete as directed by GE/E-in-Charge

ditto all as per item No.135 replacement of old unserviceable knobs and supply and fixing by teak fancy knobs with machine screw and washers of approved quality by GE/E-in-Charge

ditto all as per item No 135. but S&F in replacement of 75mm butt hinges MS cold rolled "medium grade" butt hinges ISI marked

ditto all as per item No.135 but S&F in replacement of Ball catch spring with magnetic catcher of approved quality by, GE/E-in-Charge

ditto all as per item No 135 above but S&F in replacement of sides as per existing size/specifications complete

Bin Soiled Linen (Drawing No FD-244):- Taking out old unservicable back side of Bin soiled linen and supply & fixing new back made out of 6 mm thick commercial grade plywood suitable size complete all as specified and directed by Engineer-in-Charge.

ditto all as per item No 145 above but taking out old broken unserviceable leg of bin solid and supply & fixing new suitable leg made of 1st class hard wood (MP Teak) of suitable size complete.

ditto all as per item No 145 above but removing all/broken plywood from the top of bin solid linen with out damaging the frame and in lieu of providing / fixing 6 mm thick one side teak plywood surface complete.

Table 3' X 3' (900 X 900 MM) (Drawing No FD-291):- Taking out broken/u/s table top of table 3’X3’ and supply & fixing new table top of suitable size, made of 18 mm thick pre-laminated mdf board, bonded with phenol formaldehyde synthetic resin, exterior grade of suitable size, one side with approved shade and balancing white lamination on other side with and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins complete all and make all joints stiff as specified and directed by Engineer-in-Charge.

ditto all as per item No 148 above but broken side rail complete

ditto all as per item No 148 above but taking out old broken unserviceable leg of table 3’X3’ and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) of suitable size including preparation of new surfaces surface complete.

ditto all as per item No 148 above but S&F in replacement of corners of sides 3"x3" if thickness 25mm underneath the top rails and joining the legs complete to make joints stiff and stable as specified and directed br GE/ Engr-in-Charge.

CHAIR DINNING LONG BACK FD-357 : S&F in Replacement of unserviceable tapestry cloth form seat and back with new tapestry cloth of range not less than 450/- meter of shade colour approved by GE/Engr-in-charge.

diito all as per item No.152 but S&F in replacement of cushion 32 density of 50mm thickness (Make Sleepwell ) of suitable size of seat and back made to size duly upholstered with tapestry cloth all as specified and directed by GE/E-in-Charge.make sleepwell.

diito all as per item No.152 but S&F in replacement of unserviceable front legs teak wood complete all as specified and directed by GE/E-in-Charge

diito all as per item No.152 but S&F in replacement of rear legs teak wood of suitable size complete all as specified and directed by GE/E-in-Charge

diito all as per item No.152 but S&F in replacement of side rails with of teak wood 40mmx20mm made to size as existing all as specified and directed by GE/E-in-Charge

diito all as per item No.152 but S&F in replacement of centre stiffner teak wood 25mm x 40mm all as specified and directed by GE/E-in-Charge

diito all as per item No.152 but S&F in replacement of Back/Front rail of seat with new teak wood rail of 75mmx20mm complete all as specified and directed by GE/E-in-Charge

diito all as per item No.152 but S&F in replacement of Batten with new teak wood batten 70mmx10mm all as specified and directed by GE/E-in-Charge

diito all as per item No.152 but S&F in replacement of side stiffner teak wood 25mm x 40mm all as specified and directed by GE/E-in-Charge

CHAIR EASY WITH CUSHIONED : S&F in Replacement of unserviceable tapestry cloth form seat and back with new tapestry cloth of range not less than 450/- meter of shade colour approved by GE/Engr-in-charge.

diito all as per item No.161 but S&F in replacement of unserviceable foam of seat with coolgels-particle PU foam of 75mm thickness 32 density suitable size Make Sleepwell duly upholstered as directed by GE/Eng-in-Charge

diito all as per item No.161 but S&F in replacement of unserviceable foam of back with coolgels-particle PU foam of 75mm thickness 32 density suitable size Make Sleepwell duly upholstered as directed by GE/Eng-in-Charge

diito all as per item No.161 but S&F in replacement of arm with new teak wood arm of 65x25mm of suitable complete as directed by GE/Eng-in-Charge

diito all as per item No.161 but S&F in replacement of unserviceable front legs teak wood as directed by GE/Eng-in-Charge

diito all as per item No.161 but S&F in replacement of unserviceable rear legs teak wood as directed by GE/Eng-in-Charge

diito all as per item No.161 but S&F in replacement of plywood seat with 6mm thick commercial plywood as directed by GE/Eng-in-Charge

ALMIRAH SMALL SHELVES (W) : S&F in Replacement of front shutter of almirah medium with shelves with new suitable size or complete as existing as directed by GE/Eng-in-Charge

diito all as per item No.168 but S&F in replacement of unserviceable shelves with new of suitable size or as existingas directed by GE/Eng-in-Charge

diito all as per item No.168 but S&F in replacement of unserviceable MS cold rolled (medium grade) butt hinges 50mm long ISI marked as directed by GE/Eng-in-Charge

diito all as per item No.168 but S&F in replacement of hasp and staple of 75mm size with new aluminum hasp and staple of 75mm as directed by GE/Eng-in-Charge

diito all as per item No.168 but S&F in replacement of unserviceable long front stiffner teak wood at the base of almirah of suitable size complete as directed by GE/Eng-in-Charge

BOOK CASE (FD-237) : Taking out existing old unserviceable top and bottom of book case and providing new top and bottom made out of 18 mm thick commercial block board, bottom shall be of 18 mm thick plywood commercial complete all as spceified and directed by Engr-in-Charge

ditto all as per item No 173 but Supply and fixing new shutter double leaf made out of 18 mm thick MDF board one side teak finish and other side commercial fixed with continuous hinges chromium plated (Piano) complete, 6 mm thick teak wood edging shall be provided, 40 mm plastic knob superior quality in each shutter shall be provided.

ditto all as per item No 173 but S&F shelf from book case and providing new shelf made out of 1st class hard wood (Teak) and bottom of 6 mm thick plywood commercial BWR Gde in each drawer complete as directed by Engr -in-Chrage

SAFE MEAT FD-47,369 : S&F in Replacement of unserviceable wire mesh from the safe meat and supply and fixing of wire mesh 20 gauze of quality approved by GE from all sides as existing /directed by GE/Eng-in-Charge

diito all as per item No.176 but S&F in replacement of legs teak wood of with new of suitable size are as existing as directed by GE/Eng-in-Charge

diito all as per item No.176 but S&F in replacement of unserviceable aluminum hasp and staple size 75mm long directed by GE/Eng-in-Charge

diito all as per item No.176 but S&F in replacement of aluminum handle 100mm long directed by GE/Eng-in-Charge

diito all as per item No.176 but S&F in replacement of unserviceable bottom rail of 50mm x 19mm of teak wood complete as directed by GE/Eng-in-Charge

diito all as per item No.176 but S&F top rails complete directed by GE/Eng-in-Charge

diito all as per item No.176 but S&F in replacement of 19mm thick teak wood plank of suitable size at the back as directed by GE/Eng-in-Charge

diito all as per item No.176 but S&F in replacement of teak wood plank 19mm thick of suitable size at the bottom as directed by GE/Eng-in-Charge

diito all as per item No.176 but M&L for painting a coat of white synthetic paint superior quality(glossy) over a coat of preimer to all wooden surface with spray machine as per standard workmanship as directed by GE/Eng-in-Charge. Make asian/berger/nerolac.

HAT STAND FD-46,363,364 :S&F in Replacement of unserviceable mirror of hat stand with new mirror 5mm thickness 300mm x 460mm complete as existing of quality approved by GE and as directed by Eng-in-Charge

ditto as per item No. 185 but S&F in replacement of unserviceable pegs teak wood of hat stand with new peg so as to match the existing pegs of size as existing and quality approved by GE as directed by Eng-in-Charge

ditto as per item No. 185 but S&F in replacement of unserviceable particle board with new mdf board of 18mm thickness of exterior grade with one side teak wood approved by GE as directed by Eng-in-Charge

ditto as per item No. 185 but S&F in replacement of teak wood beading 6mm x 35mm edges round all round complete as specified and directed by Eng-in-Charge

ditto as per item No. 185 but S&F in replacement of unserviceable metal key plates of suitable size as specified and directed by GE/Eng-in-Charge

TABLE 5' X 2' 10" (W) FD-498 : S&F in Replacement of unserviceable legs with new Ist class teak wood legs 50mm x 50mm in section of top 40mm x 40mm in section of bottom complete as specified and directed by GE/Eng-in-Charge

ditto as per item No.190 but S&F in replacement of unserviceable long rail Ist class teak wood 25mm x 100mm as specified and directed by GE/Eng-in-Charge

ditto as per item No.190 but S&F in replacement of short rail 1st class teak wood complete as specified and directed by GE/Eng-in-Charge

ditto as per item No.190 but S&F in replacement of unserviceable top with new top made of 18mm thick prelaminated mdf board of teak vaneer exterior grade fixed with 4mm thick teak wood beading on the edges directed by GE/Eng-in-Charge

ditto as per item No.190 but S&F in replacement of side stiffners 1st class teak wood 25mm x 50mm of suitable size existing complete as specified and directed by GE/Eng-in-Charge

ditto as per item No.190 but S&F in replacement of centre stiffner 1st class teak wood 25mm x 50mm of suitable size as existing complete as specified and directed by GE/Eng-in-Charge

ditto as per item No.190 but S&F in replacement of unservicable wooden plank on the top with new wooden plank of suitable size as existing complete as specified and directed by GE/Eng-in-Charge

BIN SOILED LINEN multipurpose (FD/E6/MAP/09) : Taking out existing old unserviceable top and bottom of bin soiled linen multipurpose and providing new top and bottom made out of 18 mm thick pre-laminated particle board including 4 mm thick teak wood edging all aroung the top complete all as specified.

ditto all as per item No 197 but Taking out unserviceable plywood from bin soiled linen multipurpose back side and providing new 6 mm plywood including 4 mm teak wood deiging complete all as specified.

ditto all as per item No 197 but Taking out old unserviceable drawer from bin soiled linen multipurpose and providing new drawers made out of 18 mm particle board including complete all as specified and directed by Engr-in-Charge.

ALMIRAH LARGE WITH SHELVES (DB-4116) : Supply and fixing shelf made out of 20 mm thick second class hard wood plank of size 1050 mm x 500mm, complete all as specified, shown on drawing and as directed.

Supply and fixing in replacement haps and staple aluminium anodised of size 100mm (as per sample) complete all as specified, shown on drawing and as directed.

TV trolley (Fd/E6/Map/04(R) : Taking out existing old unserviceable top of TV trolley and providing new top of made out of 18 mm thick Pre- laminated particle board including 4 mm thick teak wood edging all aroung the top complete all as specified.

ditto as per item No. 202 but S&F old unsv back of TV trolley and providing new back of made out of 18 mm thick Pre-laminated particle board complete all as specified.

ditto as per item No. 202 but S&F old unsv side of TV trolley and providing new side of made out of 18 mm thick Pre- laminated particle board complete all as specified.

ditto all as per item No.202 but S&F in replacement of Ball catch spring with magnetic catcher of approved quality by, GE/E-in-Charge

Computer table companion C2 Make : Godrej : Taking out existing old unserviceable top of computer table and providing new top of made out of 18 mm thick pre-laminated MDF board, exterior grade of suitable size, one side with teak shade and balancing white lamination on other side complete all as specified.

ditto as per item No. 206 but S&F new side of made out of 18 mm thick pre-laminated MDF board, exterior grade of suitable size, one side with teak shade and balancing white lamination on other side complete all as specified.

ditto as per item No. 206 but S&F new key board of made out of 18 mm thick pre-laminated MDF board, exterior grade of suitable size, one side with teak shade and balancing white lamination on other side with channel complete all as specified.

Side rack 3/4 space (DB 4123): S&F in Replacement of front leg of side rack 3/4 space new suitable size or complete as existing as directed by GE/Eng-in-Charge

diito all as per item No.185 but S&F Replacement of rear leg of side race 3/4 space new teak wood leg suitable size or complete as existing as directed by GE/Eng-in-Charge

diito all as per item No.185 but S&F Replacement of wooden shelf of side race 3/4 space new teak wood shelf suitable size or complete as existing as directed by GE/Eng-in-Charge

Table office clk wooden(Drawing No DB-4120):- Taking out old unserviceable leg of table office clk wooden and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of surface complete all as specified and directed by GE/E-in-Charge.

ditto all as per item No 212 but unserviceable long rail of suitable size complete.

ditto all as per item No 212 but unserviceable short rail of suitable size complete.

ditto as per item No 212 but taking out un-serviceable table top of table office clk wooden, supply & fixing new table top made of teak wood suitable size or complete as existing as directed by GE/Eng-in-Charge

ditto all as per item No 212 but unserviceable stiffners below the top and supply and fixing the new stiffner of suitable size in dovetail joint between long rails size complete as directed by GE/Engr-in-charge.

Replacement of old unserviceable PVC buffers and S & F PVC buffers/rings of size 20mm dia and 15mm height to table as directed by GE/E-in-Charge

Table office officer wooden(Drawing No DB-4119):- Taking out old unserviceable leg of table and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of surface complete all as specified and directed by GE/E-in-Charge.

ditto all as per item No 218 but unserviceable long rail of suitable size complete.

ditto all as per item No 218 but unserviceable short rail of suitable size complete.

ditto as per item No 218 but taking out un-serviceable table drawer of table office office officer wooden, supply & fixing new drawer made of teak wood suitable size or complete as existing as directed by GE/Eng-in-Charge

ditto all as per item No 218 but unserviceable stiffners below the top and supply and fixing the new stiffner of suitable size in dovetail joint between long rails size complete as directed by GE/Engr-in-charge.

Replacement of old unserviceable PVC buffers and S & F PVC buffers/rings of size 20mm dia and 15mm height to table as directed by GE/E-in-Charge

CANNING;- Removing old canning from existing wooden furniture (any type) and supply & re-canning with virgin white plastic cane 2 mm wide and 0.4mm thick for seat and back and 3.00 mm wide and 0.6 mm thick for border, oval shape (half round) as per Godrej pattern complete all as specified.

POLISHING :- Preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfaces with sand paper (mannually/by grinder machine), removing pluck marks with wooden scraper, cleaning of dirt and stopping holes by filling putty by adding colour of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surface with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish of Ist quality as per manufacturer’s instructions till glossy finish is achieved for the following furniture items complete all as specified and directed by GE/Engr-in-Charge. ( TO BE CARRIED OUT AT SITE/FUR YARD OF ALL ITEMS)

Almirah large/medium with shelf (Drg Nos FD-1031/ 351, 350/243)

Bed Newar and Bed Plywood Top (Drawing No FD-21,245,246, 247,214,3970)

Book Shelf open Small

Book Shelf open Large

Book case library pattern

Bin soiled linen small

Book case

Chair Easy Cushioned

Chair Dinning Long Back

Chair Dining (Drawing Nos FD-16, 279, 228, 203)

Chair Easy (Drawing No FD-229)

Chair writing (Drawing No FD-250, 280)

Chair Wooden Bottom Without Arm (Drawing No FD- 56, 225, 285)

Hat stand with mirror

Sofa Chair single

Side Board

Stool Dressing CB (Drawing No 27,252,274)

Sofa Set 5 Seater (Drawing No FD- 373, 281)

Table Peg (Drawing No FD- 25, 236, 277)

Table Centre (Drawing No FD-29, 274, 235)

Teapoy (Drawing No FD- 64, 232, 278)

Table Dining 6/8 Person (Drawing No FD- 30, 239, 273, 376)

Table 3' X 2' with/without Drawer (Drawing No FD- 283, 284, 223, 224)

Table Dressing Ladies (Drawing No FD-251,378)

Table Dressing Gents (Drawing No FD-31, 230, 278, DB- 3980)

Table Bed Side (Drawing No FD- 28, 248, 276, 210, DB- 3956, 4049)

Table Writing (Drawing No FD- 249, 33.275 DB 3959)

Table JCO Modified

Table office clk wooden

Rack 3/4 spaces

Bin linen multipurpose (FD/E6/MAP/09)

Table 900mmx900mm

Table office officer

Table 5'x2'10''

Schedule of credit amount of Rs.78,592.00 to be deducted during AOC

ANAND FURNITURE

Supreme Builders