Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹2.6 L
EMD Value
₹3,000
Closing Date
10 Nov 2023, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer, EDC, Hapur
Superintending Engineer, EDC, Hapur
Various works in buisness plan phase 1 and II One crore under EDC-Hapur
2023_PVVNL_854932_1
89(W)/EDCH/2023-24
Open Tender
Electrical Works
Lump-sum
Hapur
enclosed
3 documents required · 3 mandatory
₹1,180
SE, EDC, Hapur
₹3,000
10 Nov 2023
23 Oct 2023
10 Nov 2023
23 Oct 2023
10 Nov 2023
23 Oct 2023
Amount
Increasing Capacity of 10 to 25 KVA at Mohalla-Jasroopnagar, emanating from 33/11KV Sub-Stations, Modinagar Road Hapur of EDD-I Hapur, as per sanctioned estimate.
Carriage of line material (Like: clamps, channel, conductor etc.) from Electricity Store Center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road.
Carriage of ST Pole 11 mtrs. Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road.
Opening of the Jumper of LT & HT side at Double Pole.
Safely Removal of old 10KVA Transformer from Existing Pole and opening of all accessories.
Carriage of old 25KVA transformer from JE Store/CTR/ESC, Hapur to site of work and safley unloading the same.
Fabrication, erection and fixing of double pole on ST Pole 11 mtr. long (01No. Pole Existing) with fixing of M.S. Top & Dropper Channel, M.S. S/S Angle, E-Bracket, 11 KV Pin insulator with Pin, Disc Insulator with Disc fitting as per RESPO Drawing/Norms by providing top and dropper clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts.
Mounting, Placing and connecting from LT/HT side of 11KV, 25KVA T/F as per RESPO Norms.
Laying of Lead 1X100Sqmm and completion work properly as per RESPO/Norms.
Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops.
Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts.
Grouting of ST/PCC supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials.
Laying , Stringing and final sagging of ACSR Weasel Conductor after binding from Insulator, as per RESPO/Drawing Norms.
Carriage of old 10KVA transformer from site of work to JE Store/CTR/ESC, Hapur and safley unloading the same.
Increasing Capacity of 100 to 250KVA at various places as per sanctioned estimate. (in village-Chhapkoli of EDD-I Hapur)
Opening of the Jumper of LT & HT side at Double Pole.
Safely Removal of old 100KVA Transformer from Double Pole and loading of the same, with the help of Manual Labour & Chain Tackle etc.
Safe Loading of New 250KVA transformer at JE, Store/CTR/ESC, Hapur, with the help of Crane.
Carriage of New 250KVA transformer from JE Store/CTR/ESC, Hapur to site of work.
Construction of T/F plinth suitable for 250KVA T/F (size of 2 x 2 x 1.5 mt.) as per drawing, cc work in foundation in ratio 1:4:8 (Cement, Sand & Brick ballast). Ist class brick work in side walls cc ratio of 1:4 (cement & fine sand). 12mm thick plaster in ratio 1:4 (cement & fine sand). The RCC work on top of plinth in ratio 1:2:4 after duly filling of brick ballast inside the plinth & ramming the same, including cost of all material & labour.
Safe Unloading of New 250KVA transformer from vehicle, with the help of crane at LT Sub-Station and installing of the same on Double Pole/Plinth.
Connecting of the Jumper of LT & HT side and fixing all required accessories at Double Pole/Plinth.
Laying of ABC Cable (various) Sqmm., and completion of work properly as per RESPO/Norms.
Providing & Fixing Chemical earthing of Transformers Equipment the ground surface where it will be bolted to the M.S. earth strip for connection the earth strip will be welded to the earthing and neutral support, as per RESPO/Norms.
Providing fixing and fabrication of fencing (MS 5mp 5x6mm fencing, 6 feet hight including civil welt 2x4x3) around the T/F plinth upto 6 fit height on top of T/F plinth, including cost of all material and labour as per drawing
Carriage of old 100KVA transformer from site of work to JE Store/CTR/ESC, Hapur and safley unloading the same.
Fixing of Aluminum Lugs 400Sqmmm and completion work properly including cost of lugs and required materials as per RESPO/Norms.
Construction of New 250KVA Double pole due to overload existing 1000KVA and 400KVA Transformers in area of EDD-II Hapur, as per sanctioned estimate.
Carriage of line material (Like: channel, conductor etc.) from Electricity Store Center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road.
Opening of the Jumper of LT & HT side at Double Pole.
Safe Loading of New 250KVA transformer at JE, Store/CTR/ESC, Hapur, with the help of Crane.
Carriage of New 250KVA transformer from JE Store/CTR/ESC, Hapur to site of work.
Construction of T/F plinth suitable for 250KVA T/F (size of 2 x 2 x 1.5 mt.) as per drawing, cc work in foundation in ratio 1:4:8 (Cement, Sand & Brick ballast). Ist class brick work in side walls cc ratio of 1:4 (cement & fine sand). 12mm thick plaster in ratio 1:4 (cement & fine sand). The RCC work on top of plinth in ratio 1:2:4 after duly filling of brick ballast inside the plinth & ramming the same, including cost of all material & labour.
Errection of Chair type Structure on ST Pole/Rail/R.S. joists after digging of pits and fabrication of branching, top channel and structure for placing of 11.4 KV T/F. carriage of T/F from store to site of work, including loading and unloading at both ends, placing and mounting of T/F on chair type Structure by providing Nuts and Bolts Clamps and labour etc.
Safe Unloading of New 250KVA transformer from vehicle, with the help of crane at LT Sub-Station and installing of the same on Double Pole/Plinth.
Connecting of the Jumper of LT & HT side and fixing all required accessories at Double Pole/Plinth.
Laying of LT ABC Cable (3.5x240)Sqmm., and completion of work properly as per RESPO/Norms.
Laying, Stringing and final sagging of ACSR Weasl Conductor after binding from Insulator, as per RESPO/Drawing Norms.
Providing & Fixing Chemical earthing of Transformers Equipment the ground surface where it will be bolted to the M.S. earth strip for connection the earth strip will be welded to the earthing and neutral support, as per RESPO/Norms.
Providing fixing and fabrication of fencing (MS 5mp 5x6mm fencing, 6 feet hight including civil welt 2x4x3) around the T/F plinth upto 6 fit height on top of T/F plinth, including cost of all material and labour as per drawing
Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops.
Grouting of ST/PCC supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials.
Erection & Fixing of 11KV. D.O. Fuse set on STP/PCC by providing all required materials, including cost of 11KV Fuse set.
Construction of New 100KVA Double pole due to overload existing 100KVA Transformers in area of EDD-II Hapur, as per sanctioned estimate.
Carriage of line material (Like: channel, conductor etc.) from Electricity Store Center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road.
Carriage of PCC Pole 8.5 mtrs. Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road.
Carriage of old 100KVA transformer from JE Store/CTR/ESC, Hapur to site of work and safley unloading the same.
Fabrication, erection and fixing of double pole on PCC 8.50 mtr. long with fixing of M.S. Top & Dropper Channel, M.S. S/S Angle, E-Bracket, 11 KV Pin insulator with Pin, Disc Insulator with Disc fitting as per RESPO Drawing/Norms by providing top and dropper clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts.
Mounting, Placing and connecting from LT/HT side of 11KV, 100KVA T/F as per RESPO Norms.
Laying, Stringing and final sagging of ACSR Weasel Conductor after binding from Insulator, as per RESPO/Drawing Norms.
Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts.
Errection of Pole in long span and replacment of jarjar wire, in area of EDD-I/II Hapur and Garh as per sanctioned Estimate.
Carriage of line material (Like: channel, conductor etc.) from Electricity Store Center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road.
Carriage of PCC Pole 8.5 mtrs. Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road.
Erection & fixing of PCC pole 8.5 mtr. in L.T. Line after digging of suitable pits including fixing of all accessories by providing L.T. Pin Clamp made of M.S. Flat of size 50x6mm & Shackle Insulator of size 90x75 mm & proper size nuts and bolts as per RESPO Drawing/Norms.
Erection & Fixing of PCC Pole in 11 KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, Cross Arm holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts.
Laying of ABC Cable (3x120+1x95+1x16) Sqmm., and completion of work properly as per RESPO/Norms.
Laying of ABC Cable (3x50+1x35+1x16) Sqmm., and completion of work properly as per RESPO/Norms.
Laying, Stringing and final sagging of ACSR Weasel Conductor after binding from Insulator, as per RESPO/Drawing Norms.
Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops.
Grouting of ST/PCC supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials.
Providing and fixing of Dead Engd Clamp with Eye Hook and completion work properly as per RESPO/Norms.
Removal of GI wire scrap 45kg. and weasel conductor scrap 594kg and bundling of the same.
Carriage of old and scrap GI Wire and weasel condcutor from site of work to JE Store/CTR/ESC, Hapur and safley unloading the same.
M/S YASH TRADERS HAPUR
A.A.ENTERPRISES
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .