Annual Repair to various Residential Buildings in P- II, Kurukshetra for the year 2020-21 under Head 2216.

Amount

Scraping(a) white wash and colour wash (HSR-8.32 (a)

Providing and applying one coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete (JK/Birla Make) (NS)

(G) Reinforced Cement Concrete Cement concrete 1:1 /2: 3 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel-reinforcement but including centring and shuttering, laid in position complete in all respects. (HSR 10.81 + 10.95)

(A) Brick Work in Cement Mortar First class brick laid in cement sand mortar 1:5 in foundation and plinth.(HSR 11.3)

First class brickwork laid in cement sand mortar 1:5 in first storey upto 4 meters above plinth level.(HSR 11.8)

Cement Concrete Flooring Conglomerate floor 50 mm thick cement concrete topping 1:2:4 (HSR-14.10)

Plastering on walls 12 mm thick cement plaster 1:4 (HSR-15.5)

(A) Plastering on walls 12 mm thick cement plaster 1:6 (HSR 15.7)

15 mm thick cement plaster 1:6 on the rough side of single or half brick wall (HSR 15.12)

Plastering on under side of Ceiling 10 mm thick cement plaster 1:4 (HSR-15.52)

Pointing Cement pointing 1:2 deep variety on brick and tile work. (HSR-15.60)

(A) Painting of wooden surface etc. Painting one coat with synthetic enamel paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint.(HSR 16.7)

(i)Distempering Distempering with washable oil bound distemper ( of approved manufacture ) one coat excluding priming coat on new work (HSR 16.59)

Providing One coat of exterior acrylic emulsion paint. (a) 2nd Quallity (NS)

Supplying and fixing glass panes including special metal sash putty of approved make (HSR 18.30 b) glass panes 4 mm thick, exceeding 40 sq dm areas.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS;733 and IS;1285 fixed with rawlplugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. aluminum sections shall be smooth, rust free straight mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/panelling C.P brass /stainless steel screws, etc. complete. Shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC/ neoprene gasket required including aluminum fitting. (HSR 17.96)

Providing and fixing vitrified tiles of size 600 x 600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JOHNSONS. (HSR 14.89)

Pdg & fixing ceramic tiles/anti skid tiles of size 400mm x 400mm or above size of approved make in floors, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JOHNSONS. (HSR 14.91)

Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. (HSR 14.92 b) b) Size of ceramic Glazed tiles 300 X 450mm

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, lock notch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete (HSR 18.34 a ) door and window frame of size 89 mm x 50 mm with 40 mm wide single rebate

Factory manufactured wire gauze door and window shutters of commercial hard wood such as hollock, champ, chikrassy and chaplash,etc.,(non-coniferous timber other teak, conforming to I.S.specification No.1003, kiln-seasoned),with 100 mm wide vertical styles, 150 mm wide lock rail, 200 mm wide bottom rail, and wire gauze of 140G or 120G designation including cost of iron hinges, screws,chocks/cleats,stops nail etc.,complete fixed in position (excluding the cost of any fitings,other than specified above,but including labour for fixing the same in position)-(style and rails of windows shutter shall be 75 mm wide) (HSR 17.92) (i) 30 mm thick

(ii) 35 mm thick

Factory –manufactured panelled door shutters,of teak wood,kiln-seasoned, as per I.S.specification no.401,with 100 mm wide vertical styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 12 mm thick veneered,particle board, or plywood of B.W.R.grade hot-pressed including the cost of iron hinges,screws,chocks/cleats,stops and nails etc., complete fixed in position (excluding the cost of any fittings, other than specified above but including labour for fixing the same in position). (a) Panel of decorative plywood, one side teak faced, and other side commercial faced (HSR 17.94) (i) 30 mm thick

(ii) 35 mm thick

Wrought iron and mild steel (using angles, flats, square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors open able or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR 18.12)

PROVIDING AND FIXING of poly carbonasted sheet 1.25 mm thick, heat resistence heaving life 10 years PC Lite Make (NS)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (as approved by the Engineer-in-charge) EUROPEAN TYPE WATER CLOSET SUIT, SYPHONIC TYPE, consisting of-VITREOUS CHINA WARE SYPHONIC SUITE WITH 15 LITRES CAPACITY MATCHING CHINAWARE CISTERN and all internal brass fittings COMPLETE WITH ‘P’ or ‘S’ TRAP with or without vent; (as approved by the Engineer-in-charge (HSR-30.5) (b) (ii)

EXTRA OVER Item nos. 30.1 to 30.4 and 30.6 FOR PROVIDING AND FIXING 15 LITRES CAPACITY LOW LEVEL VITREOUS CHINA WARE CISTERN complete with flush bend all other necessary fittings instead of C.I. high level cistern complete with fittings.White (HSR-30.12) (i)

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the engineer-in-charge).Bib cock long body (HSR-30.75) (a)

Providing and fixing HDPE water storage tanks of Sintex, Diplast, O.K. make with covers/lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Engineer-in- Charge. (except civil work). (HSR-30.119) 1000 capcity water tank

Providing and fixing in position glass shelf fixed in with Rawal plugs with C.P. brass screws complete including cutting and making goods the walls etcWith C.P. brass brackets and guard rail 600 mm X 125 mm (HSR-30.69) a (i)

Soap dish large C.P.BRASS Providing and fixing in position best Indian make Soap dish fixed into wall with C.P. brass screws and complete in all respects including cutting and making good the wells etc. (HSR-30.70) a (i)

600mm X 450mm INDIAN MAKE PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall of chromium plated brass clamps with C.P. brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (HSR-30.71) a (i)

Note: In case of any difference in the unit & nomenclature of any of the HSR items depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable.

MATA MANSA DEVI CO-OP L/C SOCIETY LTD