Construction of SDO civil C...

Amount

[11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand) [Through Rate]

[15.1.1.1]Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material as per clause 304 of MORTandH specifications Ordinary soil 1.1. Manual Means Depth up to 3 m [Through Rate]

[24.1.7]EARTHING AND LIGHTENING ARRESTOR 7. Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required. [Through Rate]

[24.15.4]HT CABLES (Aluminium Conductor, Armoured and Unarmoured) Providing and erection/ laying of XLPE (E) 11 KV HT Aluminium Conductor Armoured Cable ISI Mark Laid in 1 per meter below ground level with sand and bricks with all labour and material including digging and refilling of trench as required to complete the job in all respect upto the entire satisfaction of the Engineer-In-Charge of the Works 4. 95 Sq mm 3 core [Through Rate]

[24.2.8.11]LT CABLE 8.11. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 150 sqmm [Through Rate]

[24.2.8.14]LT CABLE 8.14. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work.300 sqmm [Through Rate]

[24.3.3.1]HT CABLE 3.1. Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm [Through Rate]

[24.7]RCC FOUNDATIONS FOR DG SET "Providing RCC foundation of M20 grade (1 Cement:1.5 Stone aggregate: 3 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 50 kg/cum of concrete contents, concrete cover 50mm, over a bed of 75mm thick PCC 1:5:10, of required dimensions as per OEM recommendations to provide levelled surface for placement of the DG set complete in all respects and as per directions of Engineer-in-charge (Size of foundation assumed = 5.0x1.8x1.0m)" Unit: per cum [Through Rate]

[7.23.1]Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor four level in cement mortar 1:6 (1 cement : 6 coarse sand) : 1. With non-modular bricks [Through Rate]

S/E of G.I. Half Clamps Wt. 1.47 kg. HVPN Drg. No. 2380 complete the job in all respect upto the entire satisfaction of Engineer-in-Charge.

S/E of G.I. Full Clamps Wt. 2.325 kg. HVPN Drg. No. 2349 complete the job in all respect upto the entire satisfaction of Engineer-in-Charge.

S/E of stay sets 8` long complete with X-Plate 460mm of Angie 65x65x6 Elbow and complete the job in all respect upto the entire satisfaction of Engineer-in-Charge.

S/E of Stay wire 7/8 SWG complete the job in all respect upto the entire satisfaction of Engineer-in-Charge.

S/E of G.I. nut and bolt off sizes complete the job in all respect upto the entire satisfaction of Engineer-in-Charge.

SITC of 11 KV indoor HT metering panel complete with C.Ts P. Ts. Cubical and electronic meter with accurancy class as per requirment/approved by DHBVN at he time of installation, consisting of the following. Cubical panel free standing floor mounting type made out of sheet steel 14 SWG CRCA sheet with chanel iron base frame spray painted with strong synthetic light grey enamel paint as per size and design approved by the DHBVN 3 Nos. 11 KV CTS of ratio as approved by DHBVN for indoor installation of appd. Make of 1 Nos. 11 KV PTs 11000/110 Volts Oil filled suitable for indoor installation of approved make of DHBVN. Digital Electronic Meter 3 phase 4 wires recording in KWH and rating and accuracy as by DHBVN with push button display operating system of different kind of readings. The cubical panel will be complete in all respect including intter connection, internal wiring with PVC copper cable, its testing and approval of all item by DHBVN including cost of all testing/ approval charges of all items of DHBVN including cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the engineer in charge of the work. (Rates already approved in sanctioned estimate for the work Construction of SDO civil Complex non Residential at Bawal in Distt. Rewari (Pdg. 315KVA CSS only) )

Virender Singh prop. Balaji electric company (BID ID -1287666)