REPAIR MAINTENANCE TO BOUNDARY WALL DRAIN CULVERTS AND FENCING WORKS IN THE AREA OF AGE B/R-I UNDER GE (WEST) JABALPUR

Amount

M&L for precast cement concrete blocks 1:2:4 Type B-I (20mm graded stone agg) as in kerb stone set in CM 1:6 etc all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation etc complete all as specified and directed.

M&L for Machine made pressed precast cement concrete inter locking paver block any shape and size made of M-35 grade concrete (with grey cement and no pigment) of 60mm thickness with 6mm top layer of anti abrasive material laid over and including 25mm thick (compacted) fine sieved sand complete all as specified and directed.

Demolition of brick work built in cement mortar incl all quoins, arches, pillar etc complete all as specified and directed by Engineer in Charge

M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4, etc complete all as specified and directed by Engineer in Charge.

-Ditto- all as per above item but except bricks

Demolition reinforced cement concrete of any description and in any position not otherwise specifically provided for slab of culvert etc complete all as specified and directed by Engineer in Charge

M&L for Reinforced cement concrete 1:2:4 type B-1 (20mm graded stone agg) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, desk slabs and in shelves and the like, complete all as specified and directed by Engineer in Charge

Form work to soffits of shelves,lintels,beams etc. for rough finish surface etc complete all as specified and directed by Engineer in Charges.

M&L for PCC type B1, 1:2:4 (20 mm graded agg ) as in coping including necessary formwork etc all as specified and directed.

M&L for Preparation of new plastering surfaces of walls and applying three coats of white washing etc complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exc 15 cm thickness (above or below GL) etc complete all as specified and directed.

M&L for plain Cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in foundation, filling and mass concrete etc all complete.

S&F in repairs 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints , laid in trenches/ floor etc all complete.

Supply only Intergral water proofing compound etc complete.

Fixing only chain link fencing, including line wires, any mesh, size and any type of standard, rails, straining bolts etc incl provission of binding wire etc complete all as specified and directed

Supply only Chain link fencing MS Galvanised fencing any type or size etc complete all as specified and directed

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straning and fixing to any type of standard rails straining belts including securing or tying at crossings with and provision of galvanised mild wire staple.

Excavation in post holes (or similar holes) each not exc. 0.50 cum in soft/Loose soill getting out, and removing surplus soil to a distance not exc. 50 mtr and making to good disturbed surfaces etc all as specified and directed by Engineer in Charge

M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregate in precast fencing posts, struts for fencing average sectional area exc 100 Sq cm but n exc 250 Sq cm with or without chamfered angles and flat, spalyed rounded or mitered tops,surface finish even and fair including use and waste of form work including fixing of bolts and nibs in posts during casting as shownin TD drawing No CEJZ/TD/19 sheet No 1/2 & 2/2 dated 05.05.00 complete etc all as specified and directed. Note : - Reinforcement, bolts & nuts shall be measured and paid for separately.

S&F TMT bars 6 to 8 mm dia cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Ditto all as per above items but 6 to 8 mm dia and over upto and including 10mm dia as in stirrups spacers and binders

Dismantling posts or struts (RCC) embedded in concrete, brick work masonry etc any section, including taking out embedded portion and making good disturbed ground complete etc all as specified and directed.

Dismantling fencing wire mesh, any type and size etc all complete

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F 16 to 20mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

S & F MS works for flat iron, angle iron as in post and struts including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, ornamental gate etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe-410-0 or 310-0 complete all as specified and directed.

M&L for preperation of steel surfaces of any description over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

M&L for 15mm thick cement plaster on fair faces of brick walls or concrete surfaces in cement mortar 1:4 finishin g the surfaces even and smooth with or without using water proofing compound complete all as specified and directed. (WPC where required shall be masured and paid seperately)

M&L for Preparation of new plastering surfaces of walls and applying two coats of cement base paint over a one coat of primer etc complete all as specified and directed.

M&L for providing Broken glass coping on top of wall in cm 1:3 etc all complete

Taking down steel gate exc 6 Sqm but n.exc 12 Sqm any weight and refixing the same opening on bearing after repairing , painting of gate and making good distrurbed portion etc complete all as specified

M&L for 20 mm thick granite (of any type) work (table rubbed and polished. In steps, jambs, pillars window cills and cooking platform and like in cement mortar in cm 1: 4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 20mm thick screed bed in CM 1:4 etc complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exceeding 1.5mtr depth for foundation in soft/loose soil and getting out etc all complete.

Returning filling in including, spreading, levelling, watering and well ramming in layer not exc. 25 cm in any type of soil etc completed all as specified and directed .

Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exceeding 1.5mtr above the starting point etc complete all as specified and directed.

Taking down cement or cement lime plaster at any position including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

S&F Welded steel wire fabric etc complete to wood or steel members weight not exceeding 4 kg per sqm etc all complete.

S&F 35 mm thick, precast cement concrete 1:2:4, Type B-0 using 12.5mm graded stone aggregate as in louvers and jallies, (measured solid) including all mouldings and precast cement concrete 1:2:4 type B-0, pillars/supports to jallies, set in cement mortar 1:4 complete including taking down old Jallies all as specified and directed.

Supply and laying reinforced cement concrete pipes, class NP-2 laid, cut in half round full length jointed with collars of 300 mm bore of pipe etc complete all as specified and directed.

M&L for concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid & tested for 300 mm bore of pipe with cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate complete etc all as specified and directed.

M&L for PCC 1:3:6 type C2 (40 mm graded stone agg) as in surface channel and drains etc complete all as spd

M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl forms, moulds mitered/stopped ends etc

Dismantling of cast iron or reinforced drain pipes, 200 to 300mm dia jointed in cement mortar and taking out of trenches complete all as spd

Dismantling Asbestos cement (corrugted, semi corrugated etc) sheets in roof covering etc complete all as specified and directed.

S&F fibre glass reinforcement translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall complete etc all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving exc 15 cm thickness (above or below GL) etc complete all as specified and directed.

MAYOOKH CONSTRUCTION

M/s Om Infracon

M/S BHARTI ENTERPRISES

SR ASSOCIATES

DEEPAK CONSTRUCTION

Tiki Water proofing Co