REPAIR/RENEWAL/MAINT OF GI/CI/DI WP ALONGWITH CONNECTED ITEM AND MAINT OF PUMP AND MOTOR INCL PANEL BD AT VARIOUS WS INSTL AT GHORPADI,V RD,VM MARG,G RD,QG,SFCA,SCOM,PG RD,KAHUN RD,RS RD,KOHIMA LINE AND OTHER OTM AREA IN AGE E/M (N) UNDER GE N PUNE

Amount

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth for laying pipe line and getting out in soft/ loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soils complete all as specified and as directed.

Removing of excavated material (soil) to distance not exc.50metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as directed.

Taking up or down 25 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as directed.

Taking up or down 40 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as directed.

Taking up or down 50 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as directed.

Taking up or down 80 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as directed.

Relaying only of 15mm dia GI tubes any grade in trenches after cleaning or rerunning the old screw threads with replacement of unserviceable fittings and fixtures complete all as directed. (Note: Materials obtained from Item taking up or down here-in-before)

Relaying only of 20mm dia GI tubes any grade in trenches after cleaning or rerunning the old screw threads with replacement of unserviceable fittings and fixtures complete all as directed. (Note: Materials obtained from Item taking up or down here-in-before)

Relaying only of 25mm dia GI tubes any grade in trenches after cleaning or rerunning the old screw threads with replacement of unserviceable fittings and fixtures complete all as directed. (Note: Materials obtained from Item taking up or down here-in-before)

Relaying only of 40mm dia GI tubes any grade in trenches after cleaning or rerunning the old screw threads with replacement of unserviceable fittings and fixtures complete all as directed. (Note: Materials obtained from Item taking up or down here-in-before)

Relaying only of 50mm dia GI tubes any grade in trenches after cleaning or rerunning the old screw threads with replacement of unserviceable fittings and fixtures complete all as directed. (Note: Materials obtained from Item taking up or down here-in-before)

Supply and laying for 15mm dia galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed.

Supply and laying for 20mm dia galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed.

Supply and laying for 25mm dia galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed.

Supply and laying for 40mm dia galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed.

Supply and laying for 50mm dia galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed.

Supply and laying for 80mm dia galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed.

Supply and fix for 63mm outer dia 3 layered (outer green coloured UV stabalized, middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property ) PP-R ( Polypropyelene random copolymer) ISI marked pipes SDR 7.4 and SDR 11 UV stabalised and antimicrobial fusion welded having thermal stabality for hat and cold water supply all PP-R plain and brass threaded polypropyelene random fittings and laid in trenches complete all as specified and as directed.

Supply and fix for 50mm outer dia 3 layered (outer green coloured UV stabalized, middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property ) PP-R ( Polypropyelene random copolymer) ISI marked pipes SDR 7.4 and SDR 11 UV stabalised and antimicrobial fusion welded having thermal stabality for hat and cold water supply all PP-R plain and brass threaded polypropyelene random fittings and laid in trenches complete all as specified and as directed.

Supply and fix for 32mm outer dia 3 layered (outer green coloured UV stabalized, middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property ) PP-R ( Polypropyelene random copolymer) ISI marked pipes SDR 7.4 and SDR 11 UV stabalised and antimicrobial fusion welded having thermal stabality for hat and cold water supply all PP-R plain and brass threaded polypropyelene random fittings and laid in trenches complete all as specified and as directed.

Supply and fix for 25mm outer dia 3 layered (outer green coloured UV stabalized, middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property ) PP-R ( Polypropyelene random copolymer) ISI marked pipes SDR 7.4 and SDR 11 UV stabalised and antimicrobial fusion welded having thermal stabality for hat and cold water supply all PP-R plain and brass threaded polypropyelene random fittings and laid in trenches complete all as specified and as directed.

Supply and fix for 20mm outer dia 3 layered (outer green coloured UV stabalized, middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property ) PP-R ( Polypropyelene random copolymer) ISI marked pipes SDR 7.4 and SDR 11 UV stabalised and antimicrobial fusion welded having thermal stabality for hat and cold water supply all PP-R plain and brass threaded polypropyelene random fittings and laid in trenches complete all as specified and as directed.

Material and labour for making connection of PP-R distribution branch with PP-R main of bore of pipe 16 to 40mm by providing and fixing tee including and making fusion joint etc. complete all as specified and as directed.

Material and labour for making connection of PP-R distribution branch with PP-R main of bore of pipe 50 to 75mm by providing and fixing tee including and making fusion joint etc. complete all as specified and as directed.

Supply and fix for 32mm outer dia PP-R gate valves (brass insert ) including taking down of existing unserviceable valve complete all as specified and as directed.

Supply and fix for 25mm outer dia PP-R gate valves (brass insert ) including taking down of existing unserviceable valve complete all as specified and as directed.

Supply and laying for 32mm dia HDPE pipe of pressure rating 6 kgf/sq cm , any length with and including all fittings such as bends, elbows, tees, short pieces, union etc lowering in borewell or in trenches including removal of old unserviceable pipe complete all as specified and as directed.

Supply and laying for 40mm dia HDPE pipe of pressure rating 6 kgf/sq cm , any length with and including all fittings such as bends, elbows, tees, short pieces, union etc lowering in borewell or in trenches including removal of old unserviceable pipe complete all as specified and as directed.

Supply and fix for 15mm dia gun metal gate valve with iron wheel head screwed both ends, ISI marked, fixed to GI pipe including removal of old unserviceable valve complete all as specified and as directed.

Supply and fix for 20mm dia gun metal gate valve with iron wheel head screwed both ends, ISI marked, fixed to GI pipe including removal of old unserviceable valve complete all as specified and as directed.

Supply and fix for 25mm dia gun metal gate valve with iron wheel head screwed both ends, ISI marked, fixed to GI pipe including removal of old unserviceable valve complete all as specified and as directed.

Supply and fix for 40mm dia gun metal gate valve with iron wheel head screwed both ends, ISI marked, fixed to GI pipe including removal of old unserviceable valve complete all as specified and as directed.

Supply and fix for 50mm dia gun metal gate valve with iron wheel head screwed both ends, ISI marked, fixed to GI pipe including removal of old unserviceable valve complete all as specified and as directed.

Supply and fix for 80mm dia gun metal gate valve with iron wheel head screwed both ends, ISI marked, fixed to GI pipe including removal of old unserviceable valve complete all as specified and as directed.

Supply and fix for 20mm dia gun metal non return valve horizantal/ vertical type screwed both ends, ISI marked, fixed to GI pipe including removal old unserviceable valve complete all as specified and as directed.

Supply and fix for 25mm dia gun metal non return valve horizantal/ vertical type screwed both ends, ISI marked, fixed to GI pipe including removal old unserviceable valve complete all as specified and as directed.

Supply and fix for 40mm dia gun metal non return valve horizantal/ vertical type screwed both ends, ISI marked, fixed to GI pipe including removal old unserviceable valve complete all as specified and as directed.

Supply and fix for 50mm dia gun metal non return valve horizantal/ vertical type screwed both ends, ISI marked, fixed to GI pipe including removal old unserviceable valve complete all as specified and as directed.

Supply and fix for 15mm dia PVC float valve, ISI marked, high pressure with PVC float nut complete for iron pipe including removal old unserviceble valve complete all as specified and as directed.

Supply and fix for 20mm dia PVC float valve, ISI marked, high pressure with PVC float nut complete for iron pipe including removal old unserviceble valve complete all as specified and as directed.

Supply and fix for 25mm dia PVC float valve, ISI marked, high pressure with PVC float nut complete for iron pipe including removal old unserviceble valve complete all as specified and as directed.

Material and labour for attending the emergent complaint and repairs to leakage/ damage GI pipe of size 15 mm to 25 mm bore including carrying out minor repairs etc as required to make the system in order/ functional and necessary excavation ,returning filling of soils and removal of water by using pump, cutting out GI pipe at both ends and jointing with new fittings, accessories such as union, sockets, Tee, Tee reducer etc complete all as specified and as directed. Note: (i) Rate inclusive of jointing of and earth work (ii) GI fittings will be measured and paid seperately under relevant items).

Material and labour for attending the emergent complaint and repairs to leakage/ damage GI pipe of size 40mm to 50 mm bore including carrying out minor repairs etc as required to make the system in order/ functional and necessary excavation ,returning filling of soils and removal of water by using pump, cutting out GI pipe at both ends and jointing with new fittings, accessories such as union, sockets, Tee, Tee reducer etc complete all as specified and as directed. Note: (i) Rate inclusive of jointing of and earth work (ii) GI fittings will be measured and paid seperately under relevant items).

Material and labour for attending the emergent complaint and repairs to leakage/ damage GI pipe of size 80mm bore including carrying out minor repairs etc as required to make the system in order/ functional and necessary excavation ,returning filling of soils and removal of water by using pump, cutting out GI pipe at both ends and jointing with new fittings, accessories such as union, sockets, Tee, Tee reducer etc complete all as specified and as directed. Note: (i) Rate inclusive of jointing of and earth work (ii) GI fittings will be measured and paid seperately under relevant items).

Supply only GI union of size 80 mm dia.

Supply only GI union of size 50 mm dia.

Supply only GI union of size 40 mm dia.

Supply only GI union of size 25 mm dia.

Supply only GI union of size 20 mm dia.

Supply only GI union of size 15 mm dia.

Supply only GI Socket/ reducer of size 80 mm dia.

Supply only GI Socket/ reducer of size 50 mm dia.

Supply only GI Socket/ reducer of size 40 mm dia.

Supply only GI Socket/ reducer of size 25 mm dia.

Supply only GI Socket/ reducer of size 20 mm dia.

Supply only GI Socket/ reducer of size 15 mm dia.

Supply only GI nipple heavy duty of size 80 mm dia.

Supply only GI nipple heavy duty of size 50 mm dia.

Supply only GI nipple heavy duty of size 40 mm dia.

Supply only GI nipple heavy duty of size 25 mm dia.

Supply only GI nipple heavy duty of size 20 mm dia.

Supply only GI nipple heavy duty of size 15 mm dia.

Supply only GI Elbow/ Tee equal/ Tee reducer of size 80 mm dia.

Supply only GI Elbow/ Tee equal/ Tee reducer of size 50 mm dia.

Supply only GI Elbow/ Tee equal/ Tee reducer of size 40 mm dia.

Supply only GI Elbow/ Tee equal/ Tee reducer of size 25 mm dia.

Supply only GI Elbow/ Tee equal/ Tee reducer of size 20 mm dia.

Supply only GI Elbow/ Tee equal/ Tee reducer of size 15 mm dia.

Supply only GI bend heavy duty both side threaded of size 80 mm dia.

Supply only GI bend heavy duty both side threaded of size 50 mm dia.

Supply only GI bend heavy duty both side threaded of size 40 mm dia.

Supply only GI bend heavy duty both side threaded of size 25 mm dia.

Supply only GI bend heavy duty both side threaded of size 20 mm dia.

Supply only GI bend heavy duty both side threaded of size 15 mm dia.

Supply and fix for in line pressure boosting pump electrically operated 240 volts, 50 Hz fixed to 15/ 20 mm dia conforming to Model No. PB 88 of Make Wilo or equivalent of make Kirloskar/ KSB/ Crompton/ Grandfosc as approved including necessary electrical connections, GI fittings and removal of old unserviceable one complete all as specified and as directed.

Supply and fix for in line pressure boosting pump electrically operated 240 volts, 50 Hz fixed to 20/ 25 mm dia conforming to Model No. PB 200 of Make Wilo or equivalent of make Kirloskar/ KSB/ Crompton/ Grandfosc as approved including necessary electrical connections, GI fittings and removal of old unserviceable one complete all as specified and as directed.

Burning out unserviceable/ leakage lead joint in position, including removing old lead, necessary excavation of soils, returning filling and removal of accumulated water by using pump of 80mm dia pipe complete all as directed. Note : (i) Rate inclusive of earth work (ii) Lead joint will be measured and paid seperately under relevant items.

Burning out unserviceable/ leakage lead joint in position, including removing old lead, necessary excavation of soils, returning filling and removal of accumulated water by using pump of 100mm dia pipe complete all as directed. Note : (i) Rate inclusive of earth work (ii) Lead joint will be measured and paid seperately under relevant items.

Burning out unserviceable/ leakage lead joint in position, including removing old lead, necessary excavation of soils, returning filling and removal of accumulated water by using pump of 150mm dia pipe complete all as directed. Note : (i) Rate inclusive of earth work (ii) Lead joint will be measured and paid seperately under relevant items.

Burning out unserviceable/ leakage lead joint in position, including removing old lead, necessary excavation of soils, returning filling and removal of accumulated water by using pump of 200mm dia pipe complete all as directed. Note : (i) Rate inclusive of earth work (ii) Lead joint will be measured and paid seperately under relevant items.

Material and labour for run lead joint in spigot and socket pipes and fittings of size 80 mm dia including necessary caulking the spun yarn as required complete all as specified and as directed.

Material and labour for run lead joint in spigot and socket pipes and fittings of size 100 mm dia including necessary caulking the spun yarn as required complete all as specified and as directed.

Material and labour for run lead joint in spigot and socket pipes and fittings of size 150 mm dia including necessary caulking the spun yarn as required complete all as specified and as directed.

Material and labour for run lead joint in spigot and socket pipes and fittings of size 200 mm dia including necessary caulking the spun yarn as required complete all as specified and as directed.

Supply and fix for 200mm dia cast iron sluice valve with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos including removing of old unserviceable valve complete all as specified and as directed.

Supply and fix for150mm dia cast iron sluice valve with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos including removing of old unserviceable valve complete all as specified and as directed.

Supply and fix for 100mm dia cast iron sluice valve with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos including removing of old unserviceable valve complete all as specified and as directed.

Supply and fix for 80mm dia cast iron sluice valve with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos including removing of old unserviceable valve complete all as specified and as directed.

Supply and fix for 100mm dia cast iron body and brass gate heavy duty non return valve, ISI marked, (NRV) both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos including removing of old unserviceable valve complete all as specified and as directed.

Supply and fix for 80mm dia cast iron body and brass gate heavy duty non return valve, ISI marked, (NRV) both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos including removing of old unserviceable valve complete all as specified and as directed.

supply and fix for 100mm dia cast iron foot valve, ISI marked, both end flanged with nut bolt washers and rubber gasket conforming to IS 4038, installation, testing complete all as specified and as directed.

supply and fix for 80mm dia cast iron foot valve, ISI marked, both end flanged with nut bolt washers and rubber gasket conforming to IS 4038, installation, testing complete all as specified and as directed.

supply and fix for 50mm dia cast iron foot valve, ISI marked, both end flanged with nut bolt washers and rubber gasket conforming to IS 4038, installation, testing complete all as specified and as directed.

Taking up or taking down CI/ DI pipe of size 100 mm and connections including cleaning for refixing or removal to store complete all as directed.

Taking up or taking down CI/ DI pipe of size 150 mm and 200 mm and connections including cleaning for refixing or removal to store complete all as directed.

Supply, laying, jointing and testing of 200mm bore ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast, class K-9, with cement mortar lining in inner side as per IS:8329/2000 (latest revision) and other relevant standards and metallic zinc coating followed by a finishing layer of epoxy paint in outer side, suitable for push on joint (rubber gasket joint) in any length with inside cement mortar lining laid in trenches complete all as specified an as directed. Note : Excavation and earth work shall be measured and paid separately under relevant item.

Supply, laying, jointing and testing of 150mm bore ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast, class K-9, with cement mortar lining in inner side as per IS:8329/2000 (latest revision) and other relevant standards and metallic zinc coating followed by a finishing layer of epoxy paint in outer side, suitable for push on joint (rubber gasket joint) in any length with inside cement mortar lining laid in trenches complete all as specified an as directed. Note : Excavation and earth work shall be measured and paid separately under relevant item.

Supply, laying, jointing and testing of 100mm bore ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast, class K-9, with cement mortar lining in inner side as per IS:8329/2000 (latest revision) and other relevant standards and metallic zinc coating followed by a finishing layer of epoxy paint in outer side, suitable for push on joint (rubber gasket joint) in any length with inside cement mortar lining laid in trenches complete all as specified an as directed. Note : Excavation and earth work shall be measured and paid separately under relevant item.

Material and labour for connecting pieces one end flanged and other end socket or spigot and bell mouth pieces one end flanged other end tapering as bell mounth, DI Bends tapers, Tees, pieces (Single or double branch) any type and angle/ radius and straight connecting pieces for DI Pipe upto 100 mm bore complete all as specified and as directed.

Material and labour for connecting pieces one end flanged and other end socket or spigot and bell mouth pieces one end flanged other end tapering as bell mounth, CI Bends tapers, Tees, pieces (Single or double branch) any type and angle/ radius and straight connecting pieces for CI Pipe upto 100 mm bore complete all as specified and as directed.

Material and labour for construction of brick masonry valve pit, one brick thick wall in cement mortar (1:4) on 100mm thick PCC (1:4:8) type D2 (40mm graded broken stone aggregate) in foundation, rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS sheet valve pit cover, welded with 40X5mm flat iron frame alround including provision of hinges, handle and locking arrangement and 40 x 40 x 6mm angle iron frame fixed on top of valve pit by means of holdfast 150mm long, embedded in PCC 1:2:4 type B1 (20mm graded broken stone aggregate) block of size 230 x 200 x 100 mm, applying two coats of anti-corrosive paint over a coat of red oxide zinc chrome primer after preparation of all exposed to steel surfaces including necessary earth work in soft/ loose soil and demolition of old unserviceable valve pit of size 900 X 900 X 900mm (internal dimension) complete all as specified and as directed.

All as per serial item No.104 here-in-before but valve pit of size 750 X 750 X 900mm (internal dimension).

All as per serial item No.104 here-in-before but valve pit of size 450 X 450 X 450mm (internal dimension).

Material and labour for taking out pumping sets from foundation, disconnecting the water and electric connnection and transporting to work shop, opening the pump for inspecting all parts to identify defective parts, cleaning/ servicing & greasing including refixing and replacement of unserviceable ball bearings for drive end and non drive end, gun metal bushes, worn out gland packing, gland nut bolt & replacement of damaged foundation bolts, reassembling of pumping set and transporting back to pump house, installing, connecting with water & electric connection and testing for performance for pump of capacity 0.5 HP complete all as directed.

All as per serial item No.107 here-in-before for pump of capacity 5.0 HP.

All as per serial item No.107 here-in-before for pump of capacity 7.5 HP.

All as per serial item No.107 here-in-before for pump of capacity 10.0 HP.

All as per serial item No.107here-in-before for pump of capacity 12.5 HP.

All as per serial item No.107 here-in-before for pump of capacity 15.0 HP.

All as per serial item No.107 here-in-before for pump of capacity 18.5/ 20.0 HP.

All as per serial item No.107 here-in-before for pump of capacity 25.0 HP.

All as per serial item No.107 here-in-before for pump of capacity 30.0 HP.

Material and labour for taking out electric motor by disconnecting from terminal & pump coupling, foundation complete removing of motor, carrying to workshop and return after opening motor removing burnt copper wire, cleaning all parts thoroughly rewinding motor with same gauge and same No. of turns of super enamelled copper wire including insulating materials like varnishing, heating etc and replacement unserviceable ball bearings, terminal plate, foundation bolts and reassembling the electric motor by connecting with pump and electrical connections testing on completion for motor capacity of 0.5 HP complete all as directed.

Material and labour for taking out electric motor by disconnecting from terminal & pump coupling, foundation complete removing of motor, carrying to workshop and return after opening motor removing burnt copper wire, cleaning all parts thoroughly rewinding motor with same gauge and same No. of turns of super enamelled copper wire including insulating materials like varnishing, heating etc and replacement unserviceable ball bearings, terminal plate, foundation bolts and reassembling the electric motor by connecting with pump and electrical connections testing on completion for motor capacity of 3.0HP complete all as directed.

All as per serial item No.117here-in-before but for motor of capacity 5.0 HP.

All as per serial item No.117 here-in-before but for motor of capacity 7.5 HP.

All as per serial item No.117 here-in-before but for motor of capacity 10.0 HP.

All as per serial item No.117 here-in-before but for motor of capacity 12.5 HP.

All as per serial item No.117 here-in-before but for motor of capacity 15.0 HP.

All as per serial item No.117 here-in-before but for motor of capacity 18.5/ 20.0 HP.

All as per serial item No.117 here-in-before but for motor of capacity 25.0 HP.

All as per serial item No.117 here-in-before but for motor of capacity 30.0 HP.

Supply and fix for DOL starter (conforming to IS 13947-4) 230 volts 50 Hz single phase for electric motor of capacity upto 2 HP including removal of old unserviceable one complete all as specified and as directed. Make : L&T/ Siemens/ ABB as approved.

Supply and fix for DOL starter (conforming to IS 13947-4) 415 volts 50 Hz 3 phase for electric motor of capacity upto 3 HP including removal of old unserviceable one complete all as specified and as directed. Make : L&T/ Siemens/ ABB as approved.

Supply and fix for DOL starter (conforming to IS 13947-4) 415 volts 50 Hz 3 phase for electric motor of capacity upto 5 HP including removal of old unserviceable one complete all as specified and as directed. Make : L&T/ Siemens/ ABB as approved.

Supply and fix for fully automatic star delta starter FASD in sheet metal enclouse 415 volts, 50 Hz, 3 Phase for electric motor suitable for 7.50 HP capacity including removal of old unserviceable starter complete all as specified and as directed. Make : L&T/ Siemens/ ABB as approved.

Supply and fix for fully automatic star delta starter FASD in sheet metal enclouse 415 volts, 50 Hz, 3 Phase for electric motor suitable for 10.0/12.5 HP capacity including removal of old unserviceable starter complete all as specified and as directed. Make : L&T/ Siemens/ ABB as approved.

Supply and fix for fully automatic star delta starter FASD in sheet metal enclouse 415 volts, 50 Hz, 3 Phase for electric motor suitable for 15.0 HP capacity including removal of old unserviceable starter complete all as specified and as directed. Make : L&T/ Siemens/ ABB as approved.

Supply and fix for fully automatic star delta starter FASD in sheet metal enclouse 415 volts, 50 Hz, 3 Phase for electric motor suitable for 18.5/20.0 HP capacity including removal of old unserviceable starter complete all as specified and as directed. Make : L&T/ Siemens/ ABB as approved.

Material and labour for brass impeller set suitable for any type and make of centrifugal/ monoblock pump of capacity 3.0 HP including removal of old unserviceable one complete all as specified and as directed. Make: Kirloskar/ KSB/ Becon/ Crompton Greaves as approved.

Material and labour for brass impeller set suitable for any type and make of centrifugal/ monoblock pump of capacity 5.0 HP including removal of old unserviceable one complete all as specified and as directed. Make: Kirloskar/ KSB/ Becon/ Crompton Greaves as approved.

Material and labour for brass impeller set suitable for any type and make of centrifugal/ monoblock pump of capacity 7.5 HP including removal of old unserviceable one complete all as specified and as directed. Make: Kirloskar/ KSB/ Becon/ Crompton Greaves as approved.

Material and labour for brass impeller set suitable for any type and make of centrifugal/ monoblock pump of capacity 10.0 HP including removal of old unserviceable one complete all as specified and as directed. Make: Kirloskar/ KSB/ Becon/ Crompton Greaves as approved.

Material and labour for brass impeller set suitable for any type and make of centrifugal/ monoblock pump of capacity 12.5 HP including removal of old unserviceable one complete all as specified and as directed. Make: Kirloskar/ KSB/ Becon/ Crompton Greaves as approved.

Material and labour for brass impeller set suitable for any type and make of centrifugal/ monoblock pump of capacity 15.0 HP including removal of old unserviceable one complete all as specified and as directed. Make: Kirloskar/ KSB/ Becon/ Crompton Greaves as approved.

Material and labour for brass impeller set suitable for any type and make of centrifugal/ monoblock pump of capacity 18.5/20.0 HP including removal of old unserviceable one complete all as specified and as directed. Make: Kirloskar/ KSB/ Becon/ Crompton Greaves as approved.

Material and labour for stainless steel pump shaft including stainless steel sleeves suitable for centrifugal/ mono block pump set for capacity of pump 3.0/ 5.0 HP including removal of old unserviceable one of complete all as specified and as directed. Make: Kirloskar/ KSB/ Becon/ Crompton Greaves as approved.

Material and labour for stainless steel pump shaft including stainless steel sleeves suitable for centrifugal/ mono block pump set for capacity of pump 7.5 HP including removal of old unserviceable one of complete all as specified and as directed. Make: Kirloskar/ KSB/ Becon/ Crompton Greaves as approved.

Material and labour for stainless steel pump shaft including stainless steel sleeves suitable for centrifugal/ mono block pump set for capacity of pump 18.5/ 20.0 HP including removal of old unserviceable one of complete all as specified and as directed. Make: Kirloskar/ KSB/ Becon/ Crompton Greaves as approved.

Material and labour for disconnect the electric cable from panel and taking out the unserviceable/ burnt out submersible/ openwell pump set from the bore with the help of chain pully and tripard of and transporting to work shop for carrying out rewinding the motor with same gauge and same No. of turns of with water proof PVC insulated copper wire of existing guage and size to achieve the specified/ required RPM including taking out old unserviceable winding wire, cleaning/ repairing damaged slots and also replacement of impellers, bearings, thrust bearings, gun metal bushes and NRV as per existings of pump and testing on completion to the motor and for smooth function for submersible pump set in bore well of capacity 1.0 HP complete all as specified and as directed. Note: Submersible cable, rope will be measured and paid seperately under relevant items.

All as per serial item No.143here-in-before but for submersible pump set in bore well of capacity 1.5 HP.

All as per serial item No.143 here-in-before but for submersible pump set in bore well of capacity 2.0 HP.

All as per serial item No.143 here-in-before but for submersible pump set in bore well of capacity 3.0 HP.

All as per serial item No.143 here-in-before but for submersible pump set in bore well of capacity 5.0 HP.

All as per serial item No.143 here-in-before but for submersible pump set in open well of capacity 2.0 HP.

All as per serial item No.143here-in-before but for submersible pump set in open well of capacity 3.0 HP.

All as per serial item No.143 here-in-before but for submersible pump set in open well of capacity 5.0 HP.

All as per serial item No.143 here-in-before but for submersible pump set in open well of capacity 10.0 HP.

All as per serial item No.143 here-in-before but for submersible pump set in open well of capacity 15.0 HP.

Supply only submerssible copper conductor mutistraned cable of size 2.5 Sq mm 3 core with necessary connections from motor to starter complete all as specified.

Supply only submersible copper conductor mutistraned cable of size 4 Sq mm 3 core with necessary connections from motor to starter complete all as specified.

Supply only nylon rope 8/12 mm dia with necessary locking arrangements complete all as specified.

Material and labour for CI coupling for centrifugal pump set with spider star rubber coupling as per existing size & shape suitable for 15.0 HP capacity pump set including removal of old unserviceable one complete all as specified and as directed.

Material and labour for CI coupling for centrifugal pump set with spider star rubber coupling as per existing size & shape suitable for 18.5/20.0 HP capacity pump set including removal of old unserviceable one complete all as specified and as directed.

Material and labour for disconnect the electric cable from panel and replaced the worn out contactor for 7.5 to 10 HP capacity starter in FASD starter and lugs and connecting copper wire complete all as specified and as directed. Make: L&T/ Siemen/ ABB/ Legrand as approved.

All as per serial item No.158 here-in-before but for contactor of 15.0 to 20.0 HP capacity starter. Make: L&T/ Siemen/ ABB/ Legrand as approved.

Material and labour for disconnect the electric cable from panel and replaced the worn out relay for 7.5 to10 HP capacity starter in FASD starter and lugs and connecting copper wire complete all as specified and as directed. Make: L&T/ Siemen/ ABB/ Legrand as approved. Make: L&T/ Siemen/ ABB/ Legrand as approved.

All as per serial item No.160 here-in-before but for relay of 15.0 to 20.0 HP capacity starter. Make: L&T/ Siemen/ ABB/ Legrand as approved.

Supply and fix for service tank PVC lids/ cover heavy duty including necessary locking arrangements of capacity up to 500 litres including removal of old unserviceable cove complete all as specified and as directed.

Supply and fix for service tank PVC lids/ cover heavy duty including necessary locking arrangements of capacity 1000 litres including removal of old unserviceable cover complete all as specified and as directed.

Supply and fix for water level indicator cum controller device for OH resevoir tank of 15 metres stagging showing 8 stage of water storage with necessary multi standard copper conductor cable alongwith water level sensor including removal of old unserviceable one complete all as specified and as directed. Make : Press Corporation/ Autocon as approved.

Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less then 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized iron earth strip of size 32 x 6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected to main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm with one handle for lifting made out of 8mm dia MS bar, funnel, wire mesh, 20 mm bore galvanized steel tubing (medium grade) for watering, filling charcoal or coke and salt in alternate layers, 40mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No.3 of SSR Part-I . (Note: GI earth strip and protection pipe upto 7.5metres shall be deemed to be included in quoted rate)

M&L for brick work with sub-class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 including demolition of existing brick work complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:6) on fair faces of brick or concrete surfaces finished even and fair complete all as specified and as directed.

S&F MS plain black sheet 3mm thick as in chamber cover welded to M S angle iron & flat iron frame work ,with necessary hinges and locking arrangement including applying two coats of synthetic enamel paint over a coat of red oxide primer including demolition of existing MS work complete all as specified and as directed .

Material and labour for machine pressed precast cement concrete interlocking paver block any shape and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 in floor/ pavement laid over and including 30mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample.

Supply and fix for 5000 litres capacity, rotational moulded 4 layer foam tank (white colour)polythelene water storage tanks (ISI marked) (cylindrical vertical with closed top), hoisted and fixed in postion includingtaking down old tank complete all as specified and as directed(make SINTEX,PLASTO)

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. 3. The site is in scattered area. The building(s)/site(s) shall be handed over in phases and the contractor will have to arrange his working programme accordingly. No claim whatsoever for not giving the entire site on award of work and for giving the site gradually will be admissible, except granting fair and reasonable extension of time.

K.K.Enterprises

purva engineears and contracters

GRACE CONSTRUCTIONS

M/S DHEER ENGINEERING

AN-ICON Engineering Technologies And Infrastructure Developments Pvt. Ltd

Suchit constructions

M/S - KRUPA ELECTRICALS