REPAIRS TO PLASTER, FLOORS, TILING AND OTHER ASSOCIATED B/R NATURE WORKS UNDER AGE B/R-I OF GE (W) AGRA

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed

M&L for brick work with sub class ‘B’ bricks old size (except brick), straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed. Note:- Bricks obtained from item No 3 shall be reused after cleaning.

Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with water proofing compound @ manufacturers instructions, finished fair & even complete all as specified and directed. Note : Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’.

M & L for rendering 10mm thick in CM 1:3 on ceiling surface finished even and fair without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of distemper oil emulsion over a coat of 1mm thick wall care putty all as specified and directed.

M&L for preparation of new plastered or un-plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered or un-plastered surfaces of wall and applying two coats of cement base paint over a coat of priming paint complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 350x250x7mm/450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including rendering 10mm thick plastering in CM 1:4 on brick wall complete all as specified and as directed.

M&L for ceramic non skid joint free coloured tiles (1st quality/ premium quality) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc. 0.11 Sqm as in floors, skirtings etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed.

M&L for ceramic non skid joint free coloured tiles (1st quality/premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exc. 0.18 Sqm as in floors, skirtings etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished,area of each tiles not exceeding 0.38 sqm, in floors, skirtings etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for chequered cement concrete tiles 300mm x 300mm x 25 mm thick , with grey cement and pigments, set & jointed in neat cement slurry and pointed with grey cement & pigment in floors laid over and including 20 mm thick screed bed or bedding layer in cm 1:4 complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid over and including 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for machine cut kota stone 20-25 mm thick as in floor, stair case, landing etc. laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and mirror polishing, over and including 20mm thick screed bed in CM ( 1:6) as in floor complete all as specified and directed.

M&L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick rendering as bed or bedding layer in 15mm thick CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L 75mm thickness PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in plinth protection complete all as specified

M&L for PCC 1:2:4,type B-1 (using 20 mm graded crushed stone aggregate) as in floors/paving/ path ( 40 mm thick ) laying in alternate ways, finished even and fair without using extra cement complete all as specified and directed.

S & F in repairs 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe or for union, bore of pipe 15mm (min wt 90 gms), complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including brackets, rubber bush, washers etc complete all as specified and directed.

S&F in repairs 15 mm bore CP angle/Stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified & directed.

S&F in repairs 15mm concealed stop cock, chromium plated fancy type with long shank and cup complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connection complete all as specified and directed.

S&F 15mm bore steel water tubing, medium grade, galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

S&F 20mm bore steel water tubing medium grade galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth etc. brick walls complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan pedestal pattern white (excluding fixing bolt flushing cistern and flush pipe) complete with seat cover white closed pattern with flat bottom, mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repairs vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rests and necessary concrete bedding (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts, 450 mm long complete all as specified and directed

S&F in repairs Vitreous china wash basin white flat back size 550 x 400mm including waste pipe and coupling, chain plug brackets complete all as specified and directed.

S&F in repairs 15mm bore, PTMT pillar cock screwed down for pipe and fixed complete all as specified and directed (Min wt 110g).

S&F in repairs kitchen sink made of stainless steel 1mm thick with plugs, washers, couplings and waste pipe incl bedding in CM 1:4 on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420 mm bowl size 410mm x 330mm x 160 mm etc complete all as specified and directed.

S&F 32 mm dia PVC waste pipe for wash basin /sinks 800mm long complete all as specified and directed.

S & F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) including fixing to steel pipe or union complete all as specified and directed

S&F in repair PVC Jet spray 15mm bore suitable for EWC complete all as specified and directed.

S&F in repair CP health faucet 15mm bore with chromium plated PVC tube 1.20mtr long complete all as specified and directed.

S&F in repair CP brass wall mixer with provn for OHS complete all as specified and directed.

S&F in repair CP brass central hole basin mixer without popup waste system with 450mm long flexible hose complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified in clause No. 8B.2 at Sl page No. 143 to 144 and shown in drawing on sl page No 156 of SSR 2010 respectively and as directed

S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long medium weight, cold rolled stainless steel Butt hinges complete all as specified and directed.

S&F in repair 100 mm square PTMT grating with openable flap (Min weight 25 gms) complete all as specified and directed.

Demolition of brick work built in cement motrar including all quoins, arechey, pinory complete all as specified and directed.

Balaji Associates

M/s Salim Mohomad

SHANTI CONSTRUCTIONS

SahaDevSingh Constructions