PROVN OF PARKING SHED AND CERTAIN SANCTIONED WORK AT 4AFSB VARANASI UNDER GE (AF) GORAKHPUR

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

M&L PCC (1:2:4) type B2 using (40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed .

M&L for steel work in tubular trusses including special shaped washer, hollow section, angle iron, flat iron for fixed independently connecting purlin, rafters, MS plate as reqd forming holes bolted and welded attachment and curved shaped by welding making jointless by filling including cutting etc complete all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L applying 2 coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on steel Surfaces over 10 cm girth ingluding preparation of surface complete all as specified and directed .

M&L applying 2 coats of black japan paint over a coat of red oxide zinc chrome primer on steel Surfaces over 10 cm girth ingluding preparation of surface complete all as specified and directed .

Surface excavation not exc. 30cm deep and averageing 15cm deep and getting out in soft/loose soil.

Hard core of gauge n. exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick watered and remmed to a true surface of broken stone.complete all as spfd.

M&L for 75mm thick cement concrete type D-2 1:4:8 as in sub floor/sub base of pavement etc complete all as spfd.

M&L for 75 mm thick PCC 1:2:4 type B-2 using 40 mm graded stone aggregate in floors in alternate bays, finishing surface even and smooth without using extra cement complete all as spfd.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point in soft / soil all as specified and directed .

Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quains, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Eng-in Charge

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 using( 40mm graded stone aggregate ) as in foundations, filling and mass-concrete compete all as specified and directed.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Ditto but 6mm to 8mm dia

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides plinth beams; and similar work with rough finish surfaces of concrete flat complete all as specified and directed.

M & L for Ante-Termite Treatment by treating the bottom and sides of excavation @ 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M & L for Ante-Termite Treatment by treating the Top surface of filled earth @ 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M & L for Ante-Termite Treatment by treating the soil under plinth protection @ 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M & L for Ante-Termite Treatment by treating the soil along with external perimeter of building @ 2.25 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for RCC M-25 (Design mix)using (20mm graded stone aggregate ) as in foundations including rafts, footings, foundation beams plinth beams etc compete all as specified and directed.

M&L formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed .

M&L formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides plinth beams; and similar work with rough finish surfaces of concrete flat complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

Formwork to chullah hoods, chajjas troughs and similar items including edges complete all as specified and directed.

M&L Formwork flat and fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)

M&L providing RCC M-25 (Design Mix) using 20 mm graded stone aggregate in Slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves etc complete all as specified.

M & L for RCC M-25 (Design Mix) using 20 mm graded stone aggregate as in chajjas complete all as specified.

M & L for RCC M-25 (Design Mix) using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts etc. complete all as specified.

M & L for RCC M-25 (Design Mix) using 20 mm graded stone aggregate as in beams, contilevers, bressumers, lntel over 1.5 m span etc. complete all as specified.

M&L Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls, built CM in 1:6 complete all as specified and directed.

M&L rendering 15mm thick on other than fair finish of bricks / concrete surface of wall in CM (1:4) using WPC and finished the surface even and smooth without extra cement ( WPC to be measured and paid seperately ) complete all as specified and directed .

M&L 10 mm thick cement plaster on fair surfaces in CM 1:6 on brick or concrete surfaces finished the surfaces even and smooth without using extra cement all as specified and directed .

M&L 5 mm thick rendering on concrete surfaces such as sides of roof beams, soffits of roof slab etc in CM 1:3, finished fair & smooth without using extra cement all as specified and directed .

M & L for broken stone hard core of gauge n exc 63 mm , deposited , spread and levelled in layers n exc 15 cm thick , watered and rammed to a true surface.

M&L 100 mm thick cement concrete type D2 (1:4:8) using 40 mm stone aggregate as in sub base of floor all as specified and directed.

M&L 30 mm thick cement concrete type B0 (1:2:4) using 12.5 mm stone aggregate as in sub base of floor tile all as specified and directed by Eng-in-Charge.

M&L 75 mm thick cement concrete type -C2 (1:3:6) using 12.5 mm stone aggregate as in sub base of plinth protection all as specified and directed by Eng-in-Charge.

M&L 20mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes neat cement slurry with 3.00 kg of cement per sqm complete all as specified and directedby Eng-in-Charge.

M&L light shade Vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Eng-in-Charge.

M&L light shade Vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting complete all as specified and directed by Eng-in-Charge.

S&F joint free Designer non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match.complete all as spfd and tile by Eng-in-Charge.

M&L joint free glazed tiles as in vertical surfaces size (300x200mm x7mm) thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed by Eng-in-Charge.

S&F anodised aluminium powder coating frame for doors, windows with one or more rebates including cleat for fixing etc, thickness of powder coating 50 micron complete all as specified and directed by Engr-in Charge

S&F anodised aluminium powder coating door shutters, side hunge type / openable / sliding shutter without sash bars, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings hinges type B-21 , 100 mm long (2nos) , suitable handle (02 nos) etc. complete all as specified

S&F anodised aluminium powder coating window,ventilator shutters side hunge type / openable / sliding shutter without sash bars, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stay 150 mm long 2 nos hinges type B-21 hinges type B-21 , 100 mm long (2nos) , suitable handle (02 nos) etc. complete all as specified

S&F 4mm thick figured glass, pin head type and plain slass of superior quality fixed to aluminium beading rubber packing in window exc 0.50 sqm each pane.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-Charge.

M&L for anodised aluminium Grill exc 3 kg per sqm fixed with frame in window complete all as specified and approved by Engr-in Charge.

S&F in 150 mm long aluminum anodized barrel tower bolt of extrude section ISI marked fixed with screw complete all as specified and directed.

S&F aluminum handles, cast type anodized (size of handle 125mm) fixed with screw complete all as specified and directed.

S&F 300 mm long aluminum alloy, anodised sliding door bolts, with hasp, staple (bolt type and fixing clip of sheet, cast or extruded section or cast aluminium alloy and complete all as specified.

S&F Factory made PVC single door frame of size 50x47 mm with a wall thickness of 5 mm thick sheet moulded teak face colour sheet reinforced with 19mmx19mm square tube having wall thickness 19 gauge complete all as shown in sketch on page 160 of SSR 2010 Part-II.The door frame to be fixed to the wall using MS screw 75 mm long with PVC fastener complete as per manufacturer's and as specified.

S&F factory made solid panel PVC door shutters 30 mm thick( Style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with 5 mm thick pvc sheet strip 20 mm wide struck inside with solvent cement for stiles and 5 mm thick PVC sheet for top rail,lock rail,bottom rail on either side and 10 mm (5mmx2mm)thik,20 mm wide cross PVC sheet as gap insert for topand bottom rail paneling of 5 mm thick teak face colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mmx30mm PVC sheet beading and jointed together with solvent cement complete all as shown in drawings given on page 156 of SSR 2010 part-II.The width of stiles and rails shall be as specified in para 8B2.1 on page143 of SSR 2010 part-II.Each PVC door shutter leaf shall consists of 4 nos 100 mm long MS butt hinges includings screws all as specified and directed.

M&L for roof treatment for in accessible / accessible roof including cleaning the the roof surface and applying bituminous primer @ 0.20 kg per sqm , providing and laying 4 mm thick APP water modified water proofing membrane not less than 4 kg per sqm reinforced with non woven polyster mat weighing not less than 800 N per sqcm trearing not of 180 N (by torch application method) with minimum of 10 cm side laps and 15 cm end laps by application of torch applying a coat of blown grade hot bitumen 90/15 grade over the membrane @ 1.20 kg /per sqm complete all as specified and approved by Engr-in Charg

M&L for preperation of newly plastered wall surfaces and apply two coats of oil bound distember with putty Birla white all as specified and directed.

M&L for preperation of newly plastered ceiling surfaces and apply two coats of oil bound distember with putty Birla white all as specified and directed.

M&L for preperation of newly plastered wall surfaces and apply two coats of Cement base paint with putty Birla white all as specified and directed.

Supply only water proofing compound (ISI Marked)

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as sspecified and as directed .

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point in soft / soil all as specified and directed .

Excavation in trenches in any type of soil not exc 1.5 m wide and not exc 1.5m in depth for foundation etc or for for laying of pipes or for shafts, wells, cesspits, manholes, pier holes, etc not exc 10 sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass-concrete complete all as specified and as directed .

M&L for concrete bed to drain pipes laid in trenches including packing under and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 (using 40mm grded crushed stone aggregate) for 150mm bore pipe complete all as specified and as directed

M&L for 150 mm bore reinforced concrete pipes, class NP2 laid and jointed complete with collars complete all as specified and as directed .

Brickwork with sub class `B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed .

PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate ) in benching and the like including weathering , slightly rounded or chamfered angles and throating as directed and necessary formwork complete all as specified and as directed .

M&L rendering 15mm thick on other than fair finish of bricks / concrete surface of wall in CM (1:4) using WPC and finished the surface even and smooth without extra cement ( WPC to be measured and paid seperately ) complete all as specified and directed .

Providing, precast reinfoced cement concrete as in mamholes covers 1:2:4 type B-1 (using 20mm graded crushed stone aggregate )set in cement mortar 1:4 complete all as specified and as directed . (Reinfocement shall be measued and paid for seperately) .

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Mild steel framed work as in framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 290-0 grade E-165 complete all as specified .

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm crushed stone aggregate ) surface smooth finished and reforming benching as required for internal dia of pipe 150mm complete all as specified and as directed.

Galvanised iron water tubing medium grade galvanised including short lengths fixed to wall / concealed in wall /ceiling or laid in floor complete with all fittings, such as bend, elbow,tees, short pieces,connectors,back nuts diminishing pieces, cap and plugs,unions etc of following sizes :- (a) 15mm dia

(b) 20mm dia

S&F PVC (SWR) pipes 110mm external dia double socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes single scoketed in any length with rubber ring joints fixed to walls of 110 mm bore incl taking down of U/S pipe .

S&F PVC (SWR) bends any radius for 110 mm bore provided with access door

S&F PVC (SWR) junction single, (single T) equal or unequal of 110mm dia

S&F PVC (SWR) junction single, (single T) equal or unequal of 75mm dia

S&F PVC(SWR) bends suitable for 75 mm external dia complete all as specified

S&F PVC(SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls/floor

S&F PVC waste pipe 32mm dia, 60 cm long for WHB/Urinal with long screw shanks and fly nuts, flanges end bedded in red lead cement and other fixed complete.

S&F in repairs 10 Ltrs capacity PVC flushing cistern valveless, syphonic action type, low level,white, with inlet, ball wall, float and handle including brackets and connecting to pipes and fixing of chain and pull or lever if any .

S&F grating doom of size 125mm dia with waste hole of PTMT (min weight 50grams) complete all as specified and directed.

S&F Rotational molded polyethylene water storage tanks (cylindrical vertical with threaded lead) hoisted and fixed in position all as specified in SSR Part-I of Capacity 1000 litres all as specified .

S&F in 20mm PVC Nipple suitable for HDPE Water tank (Min Wt 15mm-38gms) complete all as specified and directed.

S&F in 15mm PVC Nipple suitable for HDPE Water tank (Min Wt 15mm-38gms) complete all as specified and directed.

S&F Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20 mm- 210 gms)

S&F Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 15 mm bore, fixed in repairs.(Min Wt 15 mm- 142 gms)

S&F 150x150 mm size SGSW gully traps, Square mouthed, type 'P'

S&F 75mm bore cast iron floor trap with grating including jointing to waster pipe fixed in cement concrete type B-1 1:2:4 complete all as spfd.

S&F concealed stop cock with fitting sleeve,operating lever and adjustable wall flange size 15mm Make:-Jaquare Cat Part No.:- ALI-85083

S&Fn in repairs brass CP wash basin mixerr (Two in way) for mixing hot and cold water screwed down for iron pipe suitable for 15 mm dia bore of pipe all as specified and directed by Engineer-in-Charge. Make- Essco

S&F Angle cock with wall flange size 15mm Make:-Cera Cat Part No.:-CS 208A

S&F 450 mm long brass chromium plated towel rail fancy type Make:-CERA Cat Part No.-CA404 complete all as specified

S&F 15 mm bore Bib cock with flange and aerator Make:- CERA Cat Part No:-CS203A complete all as specified.

S&F soap dish make :- CERA Cat Part No:- CA103 complete all as specified

S&F Health faucet brass body with wall hook and 1.00 Mtr. SS braided rubber hose pipe with complete accessories Make:-CERA Cat Part No.-CG105A Complete all as specified.

S&F Wall mixer (3-in-1) with arrangement for both telephonic shower and over head shower with long bend pipe. Make :-CERA Cat Part No:- F2005403,Pryag cat No.-8780 as in repairs.

S & F over head shower 65 mm dia with revolving joint and shower arm complete Make :- CERA cat Part No :- CQ 240

45. S&F PVC connections 15mm dia size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F chromium plated toilet paper holder with flap Guard make:-CERA Cat Part No.-CA 610 complete all as specified

S&F Coyoto counter top WHB size 765x455mm Make:CERA Cat Part No:-COYOTA 1073 colour- Iovery complete all as spfd.

S&F in repairs One piece WC incl twin flushing cistern and soft closing seat cover and all connected items complete all as spfd.Make:-CERA(CAPSTAN)Cat part No.:-S1013106,Jaquar Cat No.:-VGS-WHT-81851SN

S & F ball brass valves high pressure with polyethylene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to 20 mm bore , complete all as specified and as directed.

M&L light fan point controlled by one switch with PVC insulated, unsheathed , multi stranded, single core copper conductor FRLS ( Flame Retardant Low Smoke) cable 1.50 Sqmm suitable for fixing in concealed PVC conduit of size not less than 20 mm dia with metal flush boxes including white cover plate with frame of required module.Metal flush box should not less than 2 mm thick duly painted inside and outside with two coats of synthetic enamel paint over one coat of red oxide primer of required module suitable for housing modular switches, socket, fan regulator etc. PVC insulated, unsheathed, multi stranded, single core copper conductor FRLS cable 1.50 Sqmm used as earth wire to commen earth and connected to common dolly drawn in same conduit all as specified.

All as per item No 1 above but socket 5 amp on independent board.

All as per item No 1 above but socket out let 3/6 pin 15 Amp with 4 sq mm size copper conductor for power point on indipendent board.

Supply & Fixing switch modular single pole, one way 6 Amp ,01 module.

Supply & Fixing switch modular bell push 6 Amp ,01 module.

Supply & Fixing switch modular single pole, one way 16 Amp ,01 module.

Supply & Fixing modular socket 6 Amp-2/3 pin combined ,2 module.

Supply & Fixing modular socket 6/16 Amp-2/3 pin combined ,2 module.

Supply & Fixing ceiling rose surface backlite 65X20 mm two to three terminals complete.

Supply & Fixing call bell music type.

S&F Modular electronic type step fan regulator, 120 W-2 module.

Supply & Fixing lamp holder PVC / Ploycarbonate type.

M & L for power/sub main wiring with two runs of single core 6 sqmm size and one run of single core 2.5 sqmm (green colour as earth continuty conductor ) PVC insulated unsheathed multi stranded copper conductor cables through and including rigid PVC concealed conduit complete all as specified and directed.( Note - two runs of 6 sq mm single core copper conductor and one runs of 2.5 Sq mm copper conductor shall be measured as one unit length.)

M & L for power/sub main wiring with two runs of single core 4 sqmm size and one run of single core 1.5 sqmm (green colour as earth continuty conductor ) PVC insulated unsheathed multi stranded copper conductor cables through and including rigid PVC concealed conduit complete all as specified and directed.( Note - two runs of 4sq mm single core copper conductor and one runs of 1.5 Sq mm copper conductor shall be measured as one unit length.)

Supply & fixing earth plug enclosure (plug and socket ) double pole with MCB, SPN 20 Amps.

Supply & Fixing sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail SPN 8 way.

Supply & Fixing MCB SPN 32/40 Amps 240 volts.

Supply & Fixing MCB SP 5 to 32 Amps 240 volts.

Supply & Fixing LED lamp 9 Watt .

Suply and fixing engineering plastic batten with white acrylic cover LED light ( integrated LED channel) natural white,energy saving complete with its all acessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed of 18 W .Make Bajaj Cat part No. BCLSB 18 NW or equivalent in CG/Havells.

Suply and fixing engineering plastic batten with white acrylic cover LED light ( integrated LED channel) natural white,energy saving complete with its all acessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed of 05 W .Make Bajaj Cat part No. BCLSB 05 NW or equivalent in CG/Havells.

Supply & Fixing integral LED bulkhead luminaire, 10 W, 230 Volts, IP 65 protection decorative surface mounted , complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor of suitable size.Make BAJAJ Model No. BIBWP 10W LED or equivalent in Philips/CG.

Supply & Fixing of ceiling fan AC single phase 230 /240 Volts of size 1200 mm sweep, BEE 5 star rated and conneting up electrically including provision of cable from ceiling rose or connector to fan.

Supply & Fixing of exhaust fans AC single phase 230 /240 Volts of size 300 mm sweep with louvre , complete all as specified and directed. Make . Bajaj/ Ush/ Crompton/ Havells

Supply & Fixing wall mounting fan 400 mm, 230 V AC,including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. Make: Bajaj Neo or equivalent in Havells/CG.

Supply, fixing and commissioning water heater storage type 25 liters capacity, BEE 5 star and 8 bar pressure rated, stainless steel (minimum wall thickness 2mm) tank with feroglass coated inner container energy saving high density PUF insulation vertical, ABS shock proof plastic body grouting of studs in wall in cement mortar (1:3) nuts, washers, provision of two numbers PVC braided connection 450mm long heavy duty with brass nuts and two numbers brass chromium plated angular valve suitable for 15mm bore pipe for water supply connection complete.Make: Bajaj Majesty 25 L, or equivalent in Havells/CG.

Supply, fixing in position prepainted wall panelling of acoustical channelled wood works perforated panels of width 128mm, thickness of 15mm and length 2440mm or as required, made of a high density fibre board with minimum 830 kg/cubic metre density substrate with wood veneer as per the approved shade/species & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a "Helmholtz" fluted perforation of 2mm width and 14mm of visible panel each. The panels shall have fire reaction class of 1 as per BS 476 Part 7. The edges of the panels shall be "tongue-and-grooved" to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having NRC of 0.55. The panels shall be mounted on special aluminium anodised splines using clips as approved by GE. Note :- (i) Panels shall be G14 channeled WW of Armstrong or equivalent brand of manufacturer's particular specifications. (ii) Aluminium accessories like aluminium keel, clips, corner, transition profile etc shall be of same make of panels. (iii) Work shall be executed by the manufacturer's authorised Vendor.

GANGETIC DOLPHIN

BEHL ENGINEERS AND TRADERS