REPAIRS AND CLEANING OF SEWAGE LINE MAN HOLES SEPTIC TANKS SOAK PITS COMPOUND WALL FENCING HARD STANDING PATH DRAIN AND CULVERTS IN ZONE B AREA UNDER GE EAST MATHURA

Amount

M&L for Cleaning of all blockage of any type of sewage line ie branch sewer line, main sewer line etc, manholes of any section and depth, in any situation by way of desludging cleaning manholes by using any type of means i e. manually, mechnanically or by way of any other suitable means including foreign materials as well as rodding of sewer line and between successive blocked manholes where required and ordered by Engineer-in-charge and keeping the sewage line functional, cleaning trap,water closet, soil waste/ vent pipe, gully traps upto final drop out let into treatment plant/ septic tank (working in foul condition with taking all precautionary measures) equipments as required or applicable as specified and directed. Removing the sludge/ material and disposig outside the MOD land, contractor shall engage 02 numbers of safaiwala daily for the afore said purpose, complete all as directed by Engineer-in-charge, The area of sewage system located at Zone B.(shift timing shall be as decided by Engineer in charge). (2 Safaiwala X 1 Shift X 330 days=660 shifts)

Cleaning and de-sludging water/ liquid/semi solid sludge in foul position from septic tanks and soak wells of any size depth or width by mechanically with pump and filling in the covered tank mounted on truck (Honey Sucker) and disposing of the same out side of MOD land complete all as specified.

S&F in repairs 75 mm dia of outlet cast iron Nahani trap .

S&F in repairs Salt glazed stoneware gully trap round mouthed, type 'P' 150 x 150 mm size as in repairs

S&F in repairs 110 mm dia PVC (SWR) pipe type 'A' single socketed in any length with rubber ring jointed fixed to wall incl necessary clamp etc complete

S&F in repairs 75 mm dia PVC (SWR) pipe type 'A' single socketed in any length with rubber ring jointed fixed to wall incl necessary clamp etc complete

S&F PVC (SWR), junction single, (Single T) equal or unequal with acess door 110 mm bore.

S&F PVC (SWR) bends any radius 75mm bore.

S&F PVC (SWR), junction single, (Single T) equal or unequal with acess door 75 mm bore.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. and getting out in soft/ loose soil.

Excavating in trenches exc 1.5 m wide, exc 1.5m but n exc 3m in depth, for foundation, etc. and getting out in soft/ loose soil.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement motar including cement concrete bedding and haunching complete all as specified and as directed 100mm int dia of pipe.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement motar including cement concrete bedding and haunching complete all as specified and as directed 150mm int dia of pipe.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement motar including cement concrete bedding and haunching complete all as specified and as directed 200mm int dia of pipe.

M&L for PCC M-10 grade (Nominal mix) using 40 mm graded stone agregate in bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 100 mm int dia of pipe.

M&L for PCC M-10 grade (Nominal mix) using 40 mm graded stone agregate in bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150 mm int dia of pipe.

M&L for PCC M-10 grade (Nominal mix) using 40 mm graded stone agregate in bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 200 mm int dia of pipe.

M&L for Salt glazed stoneware drain pipes, grade `A` of 100mm internal dia laid in trenches and jointed in cement mortar 1:1 all as specified and as directed.

M&L for Salt glazed stoneware drain pipes, grade `A` of 150mm internal dia laid in trenches and jointed in cement mortar 1:1 all as specified and as directed.

M&L for Salt glazed stoneware drain pipes, grade `A` of 200mm internal dia laid in trenches and jointed in cement mortar 1:1 all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm int dia of pipe.

S&F Cast iron work grade FG 150, unmachined, in gully traps, gratings, manhole covers and similar articles.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thick (above or below ground level) complete all as specified

Demolition of plain cement concrete of any description and in any position.

Demolition of RCC as in cover slabs/ roof slabs(cutting reiforcement to facilate demolition) of any description.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles

M & L for PCC M-10 grade (Nominal mix) using 40 mm graded stone agregate an in foundation of manholes etc.

M&L for brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed.

M&L for PCC M-15 grade (Nominal Mix) using 20 mm graded stone aggregate as in coping, benchings etc.

M&L for use & waste of steel form work (rough finished flat) to sides and soffit of roof slab, shelves etc n. exc 200mm thick etc complete all as specified and as directed.

M&L for use & waste of steel form work (rough finished flat) to edges of concrete flat, roof slabs n.exc 200mm thick, shelves etc complete all as specified and as directed

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for TMT bars 8 to 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for MS bars 10mm dia, cut to length, bent to shape required as inhandle of manhole covers.

M&L for Precast RCC M-25 grade (Design mix) as in cover slabs for manholes etc.

M&L for RCC M-25 grade (Design mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like & similar RCC works all as specified and directed

M&L for providing precast cement concrete M-15 grade (Nominal Mix) )using 12.5 mm graded stone aggregate as in louvers and jallies 40mm thick including all mouldings set in CM 1:4.

Taking down cement plaster on brick or stone masonry wall etc incl racking out joints hacking for key , scrubbing down with water etc as in internal and external surfaces of man holes , septic tank , filter bed etc including removing debris.

M&L for 15 mm thick plastering in CM 1:4 on fair faces of brick work or concrete surfaces and finishing the surfaces even & smooth without using extra cement all as specified and as directed.

M&L for 15 mm thick plastering in CM 1:4 on other than fair faces of brick work surfaces and finishing the surfaces even & smooth without using extra cement all as specified and as directed.

Dismantling of mild steel work of any description not other wise provided for.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Taking down steel gate by dismantling of pintel hinges replacing by new hinges of MS angle 50x50x6 mm 450 mm long and 16 mm dia MS round 100 mm long pin by welding and fixing with PCC bed block of 200 x 200 x 400mm size and making good including one coat of synthetic enamel paint etc. complete all as specified and as directed by Engineer-in-Charge.

S & F hot rolled medium and high tensile structural steel of grade E 250 quality C conforming to IS 2062: 2011 as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

S & F hot rolled low tensile structural steel of grade E165 as per IS 15911: 2010 as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. Wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar works complete all as specified and as directed.

S & F hot rolled medium and high tensile structural steel of grade E165 as per IS 15911: 2010 as in framed work such as grills, grating, etc., with ends of bars of shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework water tanks and similar work complete all as specified and directed by Engineer-in-charge.

Dismantling fencing wire mesh, any type.

Supply only chain link MS galvanised fencing any size or type.

Fixing only chain link fencing including line wire mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire.

M&L for PCC M-15 grade (Nominal Mix) using 20mm graded stone aggregate as in Surface channels and drains etc complete all as specified and directed.

M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.

All as per item No 51 above but add or deduct for each 25 mm girth or part thereof over or under 30 cm ditto.

Dismantling galvanised 2 strand, steel barbed wire in fencing.

S&F Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm barbs at 75mm spacing all as specified.

Restraining and resecuring including making good staples etc Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm barbs at 75mm spacing all as specified.

M&L for 100 mm thick PCC M-7.5 grade (Nominal Mix)using 40mm graded aggregate as in sub based to floor.

M&L for Chequred Cement concrete coloured tiles glossy finish, rubber moulded with grey cement and pigments 30cm x 30cm x 25mm thick, machine pressed, set jointed and pointed in neat cement slurry in floors, with and including 20 mm thick screed bed in CM 1:4 all as specified and as directed.

S&F Machine pressed precast concrete interlocking paver block with grey cement and pigments of any shape and size confirming to IS 15658-2006 of 80mm thick, M-40 Grade laid over 25mm thick sand cushion Note:-sand filling shall be measured and paid separately under Item No 61.

M&L sand filling under floors including consolidation complete for receiving paver blocks.

M&L for Preparing new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel pain over a coat of red oxide primer.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm thick using excavated soil all complete all as directed.

Removing of excavated surplus materials to a distance exc 50 m but nexc 100 mm and depositing where directed a level n.exc 1.5 mtrs above the starting point complete all as specificed

M/s Hoti Lal Contractor

M/S CHAUDHARY CONSTRUCTION