EXTENSION OF ADDITIONAL 3 BAYS AND CONSTRUCTION OF WORKSHOP BLCOK AT BUS STAND PALWAL (BOQ FOR THE WORK PDG. STREET LIGHT )

Amount

Suply and erection of PVC copper insulated and sheathed 2-core circular flexible wire. Make Grandlay, Havell’s, Polycab, R.R. Kabel Size 1.50 sqmm ( 48 / 0.20mm).

Size 2.50 sqmm ( 80 / 0.20mm).

Blanking sheet .Suply and erection of blanking sheet in existing distribution board.

Miniature Circuit Breaker and Isolator.Suply and erection of miniature circuit breaker/ isolator 240/415 V in the existing distribution board including making necessary connection. Make Havells/Standard/ ABB/ L&T Miniature circuit breakers of 9 KA breaking capacity.TP MCB of 32 amp.

Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

Extra for using salt and charcoal / coke for pipe earth electrode as required.

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangemrnt and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired.

Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.

Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as equired .

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as equired with all labour and material.

Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as equired .

Supply and erection of under ground cable 1 metre below ground level covered with sand and bricks including necessary connections, digging and refiling of trenches. Make Havell’s, Polycab, R.R. Kabel, Grandlay 16 Sq. mm 4 Core Ard. Cable .

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections. Make Havell’s, Polycab, R.R. Kabel, Grandlay 16 Sq. mm 4 Core Ard. Cable .

Supply and erection of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core .

Supply and erection of weather proof M.S.Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangemrnt , housed in wall , including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections .

Supply and erection of Godrej Almirah typeM.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- M.S.pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 1050 mm x 600 mm x 250 mm below ground level .

Supply and erection of M.S Saddles and clamps on wall/RCC parapit for fixing the under ground cable at a distance of .60 metre centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect.

S/E of ISI mark double walled corrugated (DWC) HDPE pipe laid 1 mtr. Below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material equired to complete the job in all respect upto the entire satisfaction of Engineer-In- Charge of the workHDPE pipe 63/50 mm outer dia/ inner dia.

Supply and errection of Hot Dip Galvanized octagonal pole 3 mm thickness, with base plate including of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete of 2 nos. 100 A, 4 pole nature links including connection etc with suitable connection arrangements for 2 no. MCB/ kit kat including cost of RCC 1:1:5:3 for foundation of size 0.7 m x 0.7m x 1.8 m with minimum 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm CC for fixing the pole with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. Make Philips, Bajaj, GE India, Surya Roshni 8 Mtr. Long pole with top dia 70 mm and bottom dia 135 mm with base plate of size 225 x 225 x 16 mm

Supply and erection of moulded case circuit brecaker single pole/ 4 pole on wall/ on existing pedestal including bounding to earth and making necessary connection required to complete the job the job in all respect up to the entire satisfaction of the Engineer -in - Charge of the work. Make Havells/Standard/ ABB/ L&T 4 pole MCCB 6 to 63 amp.

Suply, installation, testing and commissioning of 16 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 9/12 nos. luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer -in-Charge Make Philips, Bajaj, GE India, Surya Roshni Thickness of Top Section = 3 mm (Minimum). Bottom Section = 4 mm (Minimum Top Dia = 150 mmBottom Dia = 410mm Thickness of Galvanization Top = 65 micron (Min.)Bottom = 85 micron (Min.)

Supply and erection of 150 watt. Flood light IR66 fitting with all accessories as supplied with the fitting by manufacturer including erection of same with anecessary nuts & bolts and making necessary connection complete in all respect upto entire satisfaction of Engineer - In- Charge. Make & model Philips BVP122 LED146 CW FLNB FG XTFC/ Crompton LFLN-150-CDL/60 / Wipro LF20-192-060-57-XX / Equivalent model of Bajaj

Supply and erection of 90 watts LED street light fittng with lense IP 65/66, HP dia cast aluminium hoising body including erection of same on 9 mtr. Pole with all labour and material required to complete the job in all respect upto entire satisfaction of Engineer - In- Charge. Make & model Philips BRP410 LED 091 CW HE MR PC S2 PSU GR/ Bajaj BRTFG90WLEDWW/ Crompton LSTP90CDL/ Wipro LR02-102-XXX-57-XX

Supply and erection of single arm bracket made of 50 mm dia G.I pipe B class ISI 1.5 mtr. long with 25 mm dia G.I. bottom pipe with 75 mm dia 60 cm. long G.I. collar pipe, top covered with ornamental cap duly welded, painted 2 coats of aluminium paint on bracket and golden paint on ornamental cap including erection of same with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In - charge of work.Single side G.I street light bracket(as per standard specifications of manufacturer of GI octagonal pole).

Supply and erection of load line i.e. double door TPN vertical distribution board suitable for MCCB as incommer on existing angle iron board / on wall / in pedestal including making nacessary connection with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In - charge of work. Make Havells/Standard/ C&S/ ABB/ L&T4 way Double door TPN distribution board suitable for 63 amp. 4 pole MCCB but without cost of MCCB.

Supply and erection of RCC 1:1.5:3 for making Foundation for high mast of size: 1m x 1m x 2.5m, with minimum 8 nos. 16mm dia, longitudinal MS reinforcement Rods with rings of 8 mm dia at distance of not more than 200 mm for fixing pole alongwith 1:8:16 brick ballast bed of height 15cm. with all labour and Material required to complete the job in all respect upto entire satisfaction of Engineer- in- charge

Supply and erection of 32 amp. 3 pole/ 230 volt - digital time switch including cost of contactor, MCB for controlling the street light with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In - charge of work. Make Indoasian or equivalent model of Havells/ Standard

Supply and erection of factory manufactured general purpose enclosure suitable for installation of three/four pole single MCCB upto 250/400 amp. Current rating. The enclosure should be duly powder coated painted complete with necessary nuts and bolts required for fixing the enclosure on wall with all labour and material required to complete the job in all respect.

Supply and erection of lightening arrestor with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In - charge of work

ASHIRWARD ENGINEERS