GE/ALP (8317B) KOLKATA OF 2024-25

Amount

S & F for 12 mm thick toughened glass for glass partition including stainless steel fitting/ fixture fixed to floor/ ceiling wherever required including silicon filling in the joints of glass partition etc complete all as specified and directed.

S & F for 12 mm thick toughened glass door fixing to glass partition including necessary stainless steel fittings and fixture etc complete all as specified and directed.

M & L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminum alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction complete all as specified and directed.

S & F for 25 mm dia stainless steel handle of 400 mm length including necessary fittings and fixtures to glass door etc complete all as specified and directed.

S & F for roller blinds (Best quality) of required shape, size and colour any description make approved by GE complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar (1:4) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth including necessary scaffolding etc complete all as specified and directed.

M & L for 2 mm thick wall care putty on wall and ceiling surfaces (in two layers) complete all as specified and directed (upto 12 storey high building)

M & L for preparation on new plastered surfaces of wall and applying two coats of anti-algae and anti-fungle exterior grade exterior emulsion paint over a coat of primer complete all as specified and directed. (upto 12 storey bldg)

M & L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint on steel surface complete all as specified and directed.

M & L for preparation of old surfaces of wall and applying one coat interior emulsion paint on wall surface including necessary scaffolding complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.50cu.m getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm in hard dense soil complete all as specified and directed.

Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sqm on plan and getting out soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated materials n.exc 50m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed.

S&F for steel work in MS tubes (round/square) including special shaped washer, necessary FI angle iron if required to complete the works as in truss, purlins, rafter, stanchions etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 graded St-240 complete all as specified and directed.

S&F for fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc with L-type or J-type or cranked hook bolts etc complete all as specified and directed.

M&L for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.

Material and labour for rendering 15 mm thick on fair faces of brick work in cement mortar (1:4) finished the surface even and smooth without using extra cement complete all as specified and directed.

All as per item No 19 but other than fair faces of brickwork or on one side of lathing complete all as specified and directed.

M&L for preparation on new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. (upto four storey high bldg)

Material & labour for preparation on new plastered surfaces of wall and applying two coats of anti-algae and anti-fungal exterior grade weather coat paint over a coat of primer complete all as specified and directed. (upto 12 storey bldg)

M&L for providing cement concrete 1:2:4 , type B-1 (using 20 mm graded stone aggregate) as in benching ,coping ,hold fast etc complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, approns paved laid dry or laid dry and pointed etc complete all as specified and directed.

M & L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC ( 1:4:8 ),type D -2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete , sub-base to floor etc complete all as specified and directed.

Material and labour for laying silver sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Material and labour for 60 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and pigment complete all as specified and directed.

All as per item 30 above but except tiles complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc complete all as specified and directed.(Upto four storiey bldg)

M&L for 25mm thick damp proof course PCC(1:2:4), type B-0 to horizontal or vertical surfaces including necessary form work complete all as specified and directed.

Material and labour for glazed ceramic tiles of size 450x300x7-8mm thick in verticle surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed.

Dismantling of floor hearth or wall tiling includinh cement mortar bedding (but not backing), and rubbish off the premises (outside of MOD land), complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4), type B-1 (Using 20 mm graded stone aggregate) as in bedding of tiles/kota complete all as specified and directed.

Material and labour for Non-Skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and directed.

Surface excavation n' exc 30 cm deep and averaging 15 cm deep and getting out soft / loose soil complete all as specified and directed.

M&L for hard core of broken stone boulders of gauge n exc 63 mm, deposited, spread and levelled in layered n.exc. 15cm thick, watered and rammed to a true surfaces complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8), type D-2 (Using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 50 mm thick sand cushion under layer of floor including watering and consolidation complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) pipe single socket in any length rubber ring joints complete all as specified and directed.

M & L for 75 mm thick PCC (1:3:6) , type C-2 (Using 40 mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid in panels complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for preparation of new concrete surfaces over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M&L for providing factory made 75 mm thick precast RCC cover slab of 3 MT load bearing capacity confirming to IS : 12592 (Grade M-30) complete all as specified and directed.

Taking down of old wooden pelmet box or any description of wooden item complete all as specified and directed.(upto any height of bldg)

S&F for drapery rod made of electric resistance welded MS pipe of 20/25 mm dia having a coating of corrugated virgin PVC extrusion and cover with ABS plastic including knobs, brackets and all necessary arrangments to fixed with wall complete all as specified and directed.

Material and labour for preparation of old plastered surfaces and applying one coat of acrylic washable distemper on walls complete all as specified and as directed.

Materials and labour for 15 mm thick rendering on fair faces of brick work in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material & labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distember on newly plastered surface complete all as specified and directed.(Upto 12 storey bldg)

Taking down of steel windows of size n. exc 1.5 Sqm each with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, iron guard bar dovetailed or welded complete all as specified and directed (upto 12 stories bldg)

Taking down of steel windows of size n. exc 1.5 Sqm each with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, iron guard bar dovetailed or welded complete all as specified and directed (upto 12 stories bldg)

Supply and fixing for aluminium anodised (powder coated) Three track sliding window frame with shutters with (2 nos glass and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete with glazing and including 5 mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc with the following section of frame and shutter:- (a) Sections for shutter :- (i) "H' section 39 x 20 x 1.50 mm thick. (ii) 'Interlock' section 39 x 20x 1.50 mm thick. (iii) 'Edge & Bottom' section 41 x 20 x 1.50 mm thick. (b) Section for frame :- (i) Top & Sides 123 X 29.70X 1.50mm not less than 1.30 Kg /RM. (ii) Bottom 123 X 29.70 X 1.50mm not less than 1.502 Kg /RM and complete all as pecified and directed.(upto 12 stories bldg)

M&L for rendering 10 mm thick in CM (1:6) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement to match the existing surface complete all as specified and directed. (Upto 12 stories bldg)

M&L for preparation of new plastered surfaces of wall and applying two coats of acrylic distemper over a coat of primer with 3mm thick wall care putty including removal of old paint complete in all as specified and directed. (upto 12 stories bldg)

M&L for applying one coat of acrylic distemper on old plastered surface of walls including preparation complete all as specifed and directed. (upto 12 stories bldg)

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement mortar bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. (Note:- Screed bed shall be measured and paid Seperately under respective items of BOQ) Note : Size of Granite shall be decided by GE(upto 12 stories bldg)

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete in all as specified and directed. (upto 12 stories bldg)

S&F for framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars, barred iron doors'; ladders; framed balusters, ways : railing : frame work of water tanks and similar work conforming Fe-290, Gde E-165 complete all as specified and directed.(upto 12 stories bldg)

Supply and fixing for curtain rods decorative aluminium alloy with fixing brackets including taking down old pelmet box complete all as specified.(upto 12 stories bldg)

Note :- The installation shall include mounting/ fitting indoor and outdoor unit on wall with suitable bracket etc. at respective location. Laying refregerent piping, extension of drain pipe upto 6 mtr length and connecting both units after drilling holes, putting PC sleeve, sealing and finishing the same duly matched with adjoining surface. Refrigerant pipe shall be insulated with expanded carried out. Rate quoted will include charging refrigerant gas in the unit, suitable electric connection between indoor and outdoor unit (upto 6 mtr) and upto switch (upto 3 mtr). (Make : VOLTAS/ HITACHI/ DAIKIN)

M & L for modular metal flush box 2 module complete all as specified and directed.

M & L for modular white cover plate with frame 2 module complete all as specified and directed.

M & L for modular white cover plate with 3 module complete all as specified and directed.

M & L for modular metal flush box 3 module complete all as specified and directed.

S & F for modular type mini MCB 32 Amp SP, C series 3 KA white complete all as specified and directed.

S & F for modular type 32 A motor starters white colour complete all as specified and directed.

S & F for modular type 10/ 25 A, 3 Pin shuttered socket white colour complete all as specified and directed.

S & F for 25 A, 3 pin plug top complete all as specified and directed.

M & L for circuit/ sub-main wiring with two runs of 1100 V grade PVC insulated & unsheathed 4.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 4.0 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi standed copper conductor cable for earth continuity conductor connected to common earth dolly, drain through concealed PVC conduit complete all as specified and directed. Note :- (i) Three runs of 4.0 Sqmm cable shall measured as one length. (ii) Cutting chases, pinning in, making good to facings etc shall be included in sub-main wiring.

Taking down carefully copper/aluminium point wiring complete light,fan, plug point & power complete alongwith fittings such as switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DB removing materials to store & making good to disturb surfaces of wall/floors etc complete all as specified & directed.

M&L for point wiring with 1100 V grade with 1.5 Sq mm single core PVC insulated unsheathed FRLS cable, copper conductor multistranded passing through including concealed PVC conduit not lessthan 20 mm dia with concealed modular box suitable for logic modular switches , sockets , etc with logic modular white plates, sorroundings of suitable size as required at site with PVC insulated FRLS unsheathed stranded copper conductor of size 1.5 sq mm as earth wire connected to common earth dully as specified complete all as specified and directed for the following:- Note: - (i) Rate quoted shall include for cost of making MS box and concealed in wall including cutting and sinking of boxes and making good to the walls (No extra payment will be made for the same) (ii) Provision of cover plate and blank plates as per site requirement (No extra payment will be made for the same)

All as per item No 73 above but one light point / one fan point controlled by one way swtich.

All as per item No 73 above but for 5 Amp switch socket on the same board.

All as per item No 73 above but for 5 Amp switch socket on independent board.

All as per item No 73 above but size of cable 4.0 sq mm with earth wire of 4.0 sq mm complete all as specified and as directed

Supply and fixing for switch modular type, single pole, one way, 5/6 Amp, one module, completes all as specified and directed.

Supply and fixing for switch modular type, single pole, one way, and 15/16 Amps, one module complete all as specified. Make-Legrand cat no-675501 /Havells/anchor wood

Supply and fixing for socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, two module, modular type completes all as specified and directed.

Supply and fixing for socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin 5/6 Amp, modular type complete all as specified and directed.

S & F for energy efficient 5 star rated 200 mm PVC air ventilating fan, complete with louvers and making hole to the existing wall, making good to the disturbed surface as per existing and connecting wire up to nearest ceiling rose complete all as specified and directed.

Supply and fixing in replacment of ceiling rose of size 65 x 50 mm surface bakelite 240 Volts three terminal as specified and directed.

Supply & fixing for LED 20W surface mounted square shaped luminaire with high transmitivity diffuser suitable for office surface mounted with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5m length complete all as directed make-crompton LSRP-20-WW /Havells /Wipro

Supply and fixing for automatic hand dryer 1800 W ,2400RPM ,15m/s all specified and directed . make- Dolphy/similar make approved by GE.

Supply and fixing for fully automatic shoe polish machine suitable for black and brown ,145 watt SS material 1200 RPM all specified and directed . make- Dolphy MODEL No-DSPM0007/similar make approved by GE.

Supply and fixing for MCB DB SPN double door 8 way , IP 43 protection concealed on wall complete all as specified and directed.

Supply and fixing for 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 6 to 32 AMP, in the MCB DB complete with connection testing and commissioning

Supply and fixing for 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning

Supply and fixing for power unit 32 Amps including socket 25 AMP ,06 module metal box for mounting of power unit complete as specified and directed. Make : Legrand Cat Part No.6755 58 /Havells/ ABB/ L&T. for Power unit , 6772 32 for socket 25 Amp and 6890 10 for metal box 6 Module

M & L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 6 Sqmm 1100 Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note :- (i) Three runs of cables drawn in conduit will be measured as one length of sub main. (ii) PVC conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

M & L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 4 Sqmm drawn through in and including rigid PVC heavy duty concealed conduit including 6 Sqmm 1100 Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note :- (i) Three runs of cables drawn in conduit will be measured as one length of sub main. (ii) PVC conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

Material & Labour in replacement of earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and including galvanised earth lead wire of 4.00 mm dia by means of nuts & bolts, check nuts and washers of galvanised including PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.

RADHA ENTERPRISE (BID ID -3065708)

M/s UNIVERSAL (BID ID -3065706)

KWALITY CONSTRUCTION (BID ID -3065687)

THE PLANTERS ENGINEERING CORPORATION (BID ID -3061428)

SENCO (BID ID -3061455)

INDIA ELECTRICAL EQUIPMENTS (BID ID -3065991)