Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.4 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹11.8 L+₹45,536.97 (4.00%)Rejected-Finance | L2 | Rejected-Finance Higher Bid |
Tender Value
₹11.4 L
EMD Value
₹23,000
Closing Date
30 Jan 2020, 3:00 pmClosed
Executive Engineer
U.P. STATE CONSTRUCTION AND INFRASTRUCTURE DEVELOPMENT CORPORATION LTD. MAHARAJGANJ
Construction of 06 No. Type-I, Type-II, Type-IV Residance at Jay Prakash Narayan Sarvoday Vidyalaya (A.T.S.) Maharajganj (Sanitary and Water Supply).
2020_SCIDC_426892_1
030/EE/Maha/E-PROC/2019-20
Open Tender
Supply of Materials
Item Rate
30 days
items
As Per SBD
2 documents required · 2 mandatory
₹1,300
U.P. Scidco, LTD.
₹23,000
U.P. Scidco, Maharajganj
21 Mar 2020
24 Jan 2020
30 Jan 2020
24 Jan 2020
30 Jan 2020
24 Jan 2020
25 Jan 2020
Amount
Materials
Providing & fixing white vitreous china water closet squatting pan ISI marked (Indian type W.C. pan ) with 100 mm. Sand cast iron P or S trap. 10/12.5 litrs. PVC low level flushing cistern with fittings &brackels 40mm dia. C.P. flush pipe with fitting & clamps, 20mm overflow pipe with specials and mosquito proof coupling of approved municipal design, including painting of fittings and brackets, cutting & making good the walls & floors wherever required: a)White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
Prividing & Semirigid P.V.C. waste pipe for sink, wash basin & urinal basin including PVC waste fittings complete. a) 32mm dia
SOIL WASTE & VENT PIPES AND FITTINGS -II Providing & fixing soil. waste and vent pipes Providing and fixing on wall face unplasticised Rigid PVC soil and waste water pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion (i) Single socketed pipes. a) 110mm dia P.V.C. pipe
b) 75mm dia P.V.C. pipe
Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. (Make Supreme /Finolex / Prince) P-Trap type Floor Trap 110 x 110 mm
Providing and fixing terminal guard. a) 110mm
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. 110mm bend
75mm bend
Coupler 110mm
Single tee with door 75x75x75 mm
Providing and fixing heavy quality stainless steel jali (grating) with or without hole for waste pipe for floor Inahani trap.
Providing & fixing 32 # G.I. Pipes spout including curing & making good the walls etc.
WATER SUPPLY PIPES AND FITTINGS-III Providing and fixing G.I. Pipcs complete with G.I. fittings and clamps, i/c making good the walls elc. concealed pipe, including painting a) 15mm nominal bore.
b) 20mm nominal bore.
b) 20mm nominal bore.
c) 25mm nominal bore.
Painting G.I. Pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work. 20mm diameter pipe
25mm diameter pipe
Providing and fixing ISI Marked CP brass bib cock 15mm with flange of approved quality including threading the pipe etc. for completion of work. a) short body bib cock
b) long body bib cock
Providing & fixing brass full way valve with C.I. Wheel of approved quality (Screwed end) a) 15 mm nominal bore.
b) 25 mm nominal bore.
Providing and fixing ISI marked C.P. brass angle valve 15 mm with flange of approved quality including threading the pipe etc. for completion of work. a) 15 mm nominal bore
Providing and fixing 45 cm. long unplasticised PVC connection pipe with brass unions. a) 15 mm nominal bore
Providing and fixing G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work) 15mm nominal bore
20mm nominal bore
25mm nominal bore
Providing and placing on terrace (at all floor levels) polycthylene water slorage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlel and overflow pipes but without fittings and the base support for tank.
EXTERNAL SEWERAGE SYSTEM -IV Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layer a) Pipes 80mm to 300mm diameter.
Providing, laying and joining PVC pipes grade 'A' including testing of joints etc. complete. b) 160mm dia meter
Providing & laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40mm nominal size ) alround PVC. pipes including bed concrete as per standard design. b)160mm diameter PVC. Pipe
Constructing brick massonary manhole with 75 class designation F.P.S.bricks in cement mortar 1:5 (1 cement :5 fine stand) R.C.C top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement :4 coarse sand : 8 grade stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand )finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement 2coarse 4 grade stone aggregate 20mm nominal size) neat cement complete as per standard design. a) Inside size 90x80x45 cm. deep including C.I. cover with frame 455 x 610mm internal dimension total wt. of cover & frame to be not less than 38 Kg. ( Wt. of cover 23 Kg. & frame 15 Kg.)
Providing & fixing square mouth PVC. gully trap grade 'A' complete with C.I. Grating brick masonary chamber with F.P.S. brick of class designation 75 and water tight| C.I. Cover with frame of 300 x 300mm size (inside) the weight of cover to be not less than 2.70 Kg. as per standard design. a) 150 x 100mm size P,Q or S. Type
Extra for depth for manholes
INTERNAL SANITIARY FIXTURE & ACCESSORIES-I Providing & fixing white vitreous china water closet squatting pan ISI marked (Indian type W.C. pan ) with 100 mm. Sand cast iron P or S trap. 10/12.5 litrs. PVC low level flushing cistern with fittings &brackels 40mm dia. C.P. flush pipe with fitting & clamps, 20mm overflow pipe with specials and mosquito proof coupling of approved municipal design, including painting of fittings and brackets, cutting & making good the walls & floors wherever required: a)White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board. 510x1040 mm bowl depth 250 mm
Prividing & Semirigid P.V.C. waste pipe for sink, wash basin & urinal basin including PVC waste fittings complete. a) 32mm dia
SOIL WASTE & VENT PIPES AND FITTINGS -II Providing & fixing soil. waste and vent pipes Providing and fixing on wall face unplasticised Rigid PVC soil and waste water pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. a) 110mm dia P.V.C. pipe
b) 75mm dia P.V.C. pipe
Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. (Make Supreme /Finolex / Prince) P-Trap type Floor Trap 110 x 110 mm
Providing and fixing terminal guard. a) 110mm
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. 110mm bend
75mm bend
Coupler 110mm
Single tee with door 75x75x75 mm
Providing and fixing heavy quality stainless steel jali (grating) with or without hole for waste pipe for floor Inahani trap.
Providing & fixing 32 # G.I. Pipes spout including curing & making good the walls etc.
WATER SUPPLY PIPES AND FITTINGS -III Providing and fixing G.I. Pipcs complete with G.I. fittings and clamps, i/c making good the walls elc. concealed pipe, including painting (a) 15mm nominal bore.
b) 20mm nominal bore.
Providing & fixing G.I. Pipes complete with G.I. Fittings including trenching and refilling etc. (Exlernal work) (b) 20mm nominal bore.
c) 25mm nominal bore.
d) 32mm nominal bore.
Painting G.I. Pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work. 20mm diameter pipe
25mm diameter pipe
32mm diameter pipe
Providing and fixing ISI Marked CP brass bib cock 15mm with flange of approved quality including threading the pipe etc. for completion of work. (a) short body bib cock
b) long body bib cock
Providing & fixing brass full way valve with C.I. Wheel of approved quality (Screwed end) (a) 15 mm nominal bore.
b) 25 mm nominal bore.
Providing and fixing ISI marked C.P. brass angle valve 15 mm with flange of approved quality including threading the pipe etc. for completion of work. (a) 15 mm nominal bore
Providing and fixing 45 cm. long unplasticised PVC connection pipe with brass unions. (a) 15 mm nominal bore
Providing and fixing G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work) 15mm nominal bore
20mm nominal bore
25mm nominal bore
Providing and placing on terrace (at all floor levels) polycthylene water slorage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlel and overflow pipes but without fittings and the base support for tank.
EXTERNAL SEWERAGE SYSTEM -IV Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layer (a) Pipes 80mm to 300mm diameter.
Providing, laying and joining PVC pipes grade 'A' including testing of joints etc. complete. (b) 160mm dia meter
Providing & laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40mm nominal size ) alround PVC. pipes including bed concrete as per standard design. (b)160mm diameter PVC. Pipe
Constructing brick massonary manhole with 75 class designation F.P.S.bricks in cement mortar 1:5 (1 cement :5 fine stand) R.C.C top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement :4 coarse sand : 8 grade stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand )finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement 2coarse 4 grade stone aggregate 20mm nominal size) neat cement complete as per standard design. (a) Inside size 90x80x45 cm. deep including C.I. cover with frame 455 x 610mm internal dimension total wt. of cover & frame to be not less than 38 Kg. ( Wt. of cover 23 Kg. & frame 15 Kg.)
Providing & fixing square mouth PVC. gully trap grade 'A' complete with C.I. Grating brick masonary chamber with F.P.S. brick of class designation 75 and water tight| C.I. Cover with frame of 300 x 300mm size (inside) the weight of cover to be not less than 2.70 Kg. as per standard design. (a) 150 x 100mm size P,Q or S. Type
Extra for depth for manholes
Cost of septic tank ( 100 users)
Cost of soak pit 3000 mm dia
INTERNAL SANITIARY FIXTURE & ACCESSORIES-I Providing & fixing white vitreous china water closet squatting pan ISI marked (Indian type W.C. pan ) with 100 mm. Sand cast iron P or S trap. 10/12.5 litrs. PVC low level flushing cistern with fittings &brackels 40mm dia. C.P. flush pipe with fitting & clamps, 20mm overflow pipe with specials and mosquito proof coupling of approved municipal design, including painting of fittings and brackets, cutting & making good the walls & floors wherever required: (a)White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required. (a)Flat back wash Basin size 550x400 mm with single 15 mm C.P. brass pillar tap.
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
Prividing & Semirigid P.V.C. waste pipe for sink, wash basin & urinal basin including PVC waste fittings complete. (a) 32mm dia
SOIL WASTE & VENT PIPES AND FITTINGS -II Providing & fixing soil. waste and vent pipes Providing and fixing on wall face unplasticised Rigid PVC soil and waste water pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. a) 110mm dia P.V.C. pipe
b) 75mm dia P.V.C. pipe
Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. (Make Supreme /Finolex / Prince) P-Trap type Floor Trap 110 x 110 mm
Providing and fixing terminal guard. a) 110mm
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. 110mm bend
75mm bend
Coupler 110mm
Single tee with door 75x75x75 mm
Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass ( of approved quality) complete with 6- mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arangement of approved quality colour and make (Prayag or equivalent). 600mm long towel rail with tolal length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms.
Providing and fixing heavy quality stainless steel jali (grating) with or without hole for waste pipe for floor Inahani trap.
Providing & fixing 32 # G.I. Pipes spout including curing & making good the walls etc.
Providing and fixing G.I. Pipcs complete with G.I. fittings and clamps, i/c making good the walls elc. concealed pipe, including painting a) 15mm nominal bore.
b) 20mm nominal bore.
Providing & fixing G.I. Pipes complete with G.I. Fittings including trenching and refilling etc. (Exlernal work) b) 20mm nominal bore.
c) 25mm nominal bore.
d) 32mm nominal bore.
Painting G.I. Pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work. 20mm diameter pipe
25mm diameter pipe
32mm diameter pipe
Providing and fixing ISI Marked CP brass bib cock 15mm with flange of approved quality including threading the pipe etc. for completion of work. a) short body bib cock
b) long body bib cock
Providing & fixing brass full way valve with C.I. Wheel of approved quality (Screwed end) (a) 15 mm nominal bore.
b) 25 mm nominal bore.
Providing and fixing ISI marked C.P. brass angle valve 15 mm with flange of approved quality including threading the pipe etc. for completion of work. (a) 15 mm nominal bore
Providing and fixing 45 cm. long unplasticised PVC connection pipe with brass unions. (a) 15 mm nominal bore
Providing and fixing G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. complete (new work) 15mm nominal bore
20mm nominal bore
25mm nominal bore
32mm nominal bore
Providing and placing on terrace (at all floor levels) polycthylene water slorage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlel and overflow pipes but without fittings and the base support for tank.
EXTERNAL SEWERAGE SYSTEM -IV Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layer. a) Pipes 80mm to 300mm diameter.
Providing, laying and joining PVC pipes grade 'A' including testing of joints etc. complete. (b) 160mm dia meter
Providing & laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40mm nominal size ) alround PVC. pipes including bed concrete as per standard design. b)160mm diameter PVC. Pipe
Providing & fixing square mouth PVC. gully trap grade 'A' complete with C.I. Grating brick masonary chamber with F.P.S. brick of class designation 75 and water tight| C.I. Cover with frame of 300 x 300mm size (inside) the weight of cover to be not less than 2.70 Kg. as per standard design. a) 150 x 100mm size P,Q or S. Type
Extra for depth for manholes
Cost of septic tank ( 100 users)
Cost of soak pit 3000 mm dia
30% Labour Charge in Sanitory & Water Supply on cost of Material
M/S MAA AMBEY CONSTRUCTION COMPANY
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .