8204 REPAIR/MAINT OF SOLAR LIGHTS, STREET LIGHTS, GARDEN LIGHTS, PTLS HIGH MAST LIGHTS, DG SET ETC., WATER SUPPLY AND ELECT SUPPLY INSTALLATIONS AT MIL STN SHAHJAHANPUR UNDER GE (EAST) BAREILLY.

Amount

Taking down/repair of the defective security / street light fittings from wall / pole mounted of following type and refixing the same in its position after replacement of unserviceable spare parts such as choke, capacitor, igniter, holder, lamp connector etc :- Note:- (a) Old materials obtained under relevent items will be property of contractor as per sch of credit after regularisation of credit amount through the first payment. (b) Unit rate shall be deemed to be inclusive of provision of ladder arrangement in order to carryout the job at fittings on fixed position. (c) Supply only spares will be measured and paid for separately under relevent items.

Supply only Iginitor suitable for 70-400 w HPSV/MH Lamps all as specified.

Supply only Porcelain lamp holder for HPSV, HPMV 250 / 150 watt all as specified.

Supply only Porcelain lamp holder for HPSV/HPMV 125/80/70 watt all as specified.

S&F in repairs Supply only all as specified.

Supply only Chock for T-5, 2X24 Watt fitting all as specified.

Supply only Tube rod for T-5, 1X24 Watt fitting all as specified.

Supply only CFL 85 Watt retrofit all as specified.

Supply only CFL 65 Watt retrofit all as specified.

Supply only Copper Chock for HPSV/HPMV 250-400 W all as specified.

Supply only Copper Chock for HPSV/HPMV 150W all as specified.

Supply only Copper Chock for HPSV/HPMV 70Watts all as specified.

Supply only MH/SV Lamp Single Ended 250 Watts all as specified.

Supply only MH/SV Lamp Single Ended 150 Watts all as specified.

Supply only MH/SV Lamp Single/Double Ended 70 Watts all as specified.

Supply only MH Lamp Single/Double Ended 250 Watts all as specified.

Taking down old unsv street light fitting, Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including making connection complete all as specified and as directed.

Taking down old unsv street light fitting, Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics complete withIP 65/66 protection complete including making connection complete all as specified and as directed.

Taking down old unsv street light fitting, Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including making connection complete all as specified and as directed.

Taking down old unsv Flood light fitting, Supply and fixing new LED Flood light fitting 100 watts to be fixed to channel and as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed.

Taking down old unsv garden light, fitting, Supply and fixing new Extruded aluminium decorative luminaire for LED (Retrofit). is an ideal solution for Garden/pathways light of housing material powder coated Zn plated ERW MS tubular section, coloure temp cool white 6500K LED 15 watt complete including making connection complete all as specified and directed.

Dismantling and taking down the existing old rusted and weak mounting brackets of any size & type complete all as directed.

Supply and fixing mounting bracket made out of medium grade GI tubing suitable size bent to shape including 02 Nos MS clamps, Nut bolts, washers etc complete all as directed.

S & F in replacement 15 W LED Street Light suitable for Solar Light complete all as specified and as directed.

Supply and fix street light LED driver luminar suitable for 30 watt to 100 watt complete all as specified and as directed.

S & F in repacement post top lantern type light fitting [RUBY (CLEAR)- IP65] New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source including making connection complete all as specified and directed.

S & F Decorative gate light made up of high grade unbreakable (Doom Only) polycarbonate material suitable for retrofit LED Lamp 9W/10W Lamp B22 base.

Dismantling of old UNSV/rusted steel tubular poles of any size necessary disconnecting cables/over head condcutor and removing unserviceable pole from site complete all as specified and directed.

Supply and fix in replacement Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0metres long) complete all as specified and as directed.

Taking down old defective LT cable/conductor of any size and capacity complete all as specified and as directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 Sqmm 2 Core complete all as specified and as directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4.0 Core complete all as specified and as directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 4.0 Core complete all as specified and as directed.

M&L for Boring under Road / PCC by using manual tool for inserting PVC/GI pipe of 40mm size for protection of cable complete all as specified and as directed.

Trimming of trees all as along the LT line in such a way that there is clear distance of 3 meter between tree and electric line. The work will be executed to the entire satisfaction of Engr-In-Charge irrespective of the size of the tree branches etc complete all as specified and as directed. Note : (i) Tree branches etc will be left as itias the wood belongs to Cantt board/DEO and they will be responsible for the wood. (ii) Contractor will employ sufficient labour to complete the full one job with in about 15 days. (iii) Contractor will responsible for any type of accident while trimming the trees. (iv) Contractor supervisor will take proper shut down from MES installation before starting the work and clear it before resuming power supply, however full assistance will be provided by MES staff.

S & F of lead acid battery, 180 AH, industrial heavy duty, 25/ 27 plates for DG set starting Model- MHD-FXPO-1800 of Exide only after disconnecting connection and taking down the unserviceable one.

M&L Preparation of old (exposed) painted surface of existing (410 SP-31) Steel tubler poles /strut including cross clamps etc complete and applying two coat of aluminium paint above band/straps and painting of band/strap with paint of colour red post office and black numbering of pole at a height 1.5 m above GL as per existing having 15mm wide of poles at a heigth 1.5 M above GL as per existing having 15 mm wide and 50 mm bolt letter compete all as specified and directed .

M&L for replacement of cross arms. bracing supports. clamps back plates. fabricated from strucural steel sections including nut bolts washers . welding. bending cold or hot drilling holes for bolts in any shape or size as indicated or directad and incclusive of two coat of aluminium paint over one coat of redoxide . including taking down of unsv items all as specified and directed .

M&L Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) for coping around poles, including necessary form work finishing even and smooth complite all as specified and directed.

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth and getting out in soft/loose or any other type of soil for taking up or laying of cable complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cms complete all as specified and directed.

Removing excavated material not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above starting point complete all as specified and directed.

Supply and laying new dry river sand laid in trenches 8cm below the cable and 15cm above the cable and punned to 18cm as cable cushioning and covering all as directed. (Note:- Only 18 CM thick sand cushioning shall be measured and paid)

Supply and laying in replacement of brick well burnt locally available sub class 'B' laid over sand cushioning for cable protection in trenches width of brick perpendicullar to the length of cable including taking up of old UNSV bricks complete all as specified and directed by Engr-in-Charge.

Supply and Fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed 10 sqmm 2 core in service connections , one twin core cable circular complete all as specified and as directed.

Supply and Fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed 6.0 sqmm 2 core in service connections suspended by insulating hangers not more than 1 metre apart including 10sqmm suspension wire, one twin core cable circular complete all as specified and as directed.

Supply and Fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed 2.5 sqmm 2 core in service connections complete all as specified and as directed.

M&L for Earthing complete with using GI earth plate electrode 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness off 15 cm all around the plate with using 4 mm dia GI Wire as earth lead moulded and retreived to earth plate at one end and connected to main switch / control board at another end with and including 15 mm dia GI light grade from upper end of earth plate upto external face of the wall of the building including 20 mm dia bore GI pipe light grade as water pipe from chamber to upper edge of the plate GI funnel with wire mess fixed on water pipe and provison of PCC 1:2:4 type B-1 (Using 20 mm Dia graded stone aggregate) duly reinforced with mild steel round bar 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handle with and including necessarry excavation and earth work including laying the pipe concealed in floor / wall allas per plate NO-3 of SSR Part-I complete all as specified and directed and testing on completiopn (Note:- If the desired resistance is not found earthing shall be done by the contractor at no extra cost to Govt).

Supply & filling distilled water in batteries as required at various DG set installations all as specified and directed.

Maintenance/ servicing of different capacity of DG sets by carrying out check as per manfacturers maintenance chart :- (Note:-Engine Oil and patrs shall be measured and paid seperately under respective item.)

(a) DG set 12.5 KVA, Engine

(b) DG set 30 KVA , Engine

(c) DG set 40 KVA, Engine.

(d) DG set 50 KVA, Engine.

(e) DG set 63 KVA, Engine.

Repair to PT pump & injector of 12.5 to 63 KVA DG Set by taking out carefully and refixing after caliberation at manufacturer dealer including replacement of u/s worn out parts complete as directed. (Note: following parts / items for replacement of unserviceable parts shall be measured and paid seperately.)

(a) Gasket set

(b) Screen filter

(c) Cap filter

(d) Barrel and sleeve

(e) Plunger

(f) Main shaft

(g) Techno Shaft

(h) Bush techno shaft

(j) Bushing

(k) Bearing

(l) Gear pump

M&L for taking out radiator assy from existing DG of cap 63 KVA and repair to radiator tank, cleaning complete radiator with anti corrosion chemical, rewelding/ soldering for tubes / tank and refixing complete including replacement of hose pipe set with clamp connected to upper and lower tank for making complete water leak of radiator complete all as specified and directed.

All as per Srl item No. 38 here in before but capacity 30 to 50 KVA of DG Set

All as per Srl item No. 38 here in before but capacity 12.5 KVA of DG Set

Repair to oil cooler of capacity 63 KVA DG Set Cummins/ Kirloskar diesel engine water cooled with following parts:- (i) Element tube oil cooler- 02 Nos (ii) O' ring-02 Nos (iii) Retainer O' ring-02 Nos (v) Hose-01 set (vi) Clamp hose-02 Nos

M&L for taking out FIP from DG Set of capacity 63 KVA and replace the following items:- (a) Injector nozzles (b) Deliverly valve (c) Bearing (d) Bearing bush (e) Niddle valve-06 Nos & proper calibeation and testing complete and refixing to the DG sets as directed.

Repair with the replacement of following wornout parts of alternator 24 Volts:- (a) replacement of rotor (b) replacement of diode plate (c) rewinding of field winding (d) replacement of bearing (e) Replacement of regulator

Supply and replacement of water circulating pump/ water body suitable for 30 KVA to 40 KVA capacity DG Sets complete all as directed.

Supply and replacement of water circulating pump/ water body suitable for 50 KVA to 63 KVA capacity DG Sets complete all as directed.

Supply and replacement of grooved belt, of following sizes of capacity 12.5 KVA to 63 KVA DG sets complete all as directed.

S&F diesel fuel inlet/ oulet, breaded flexible pipe of 20 mm dia. With clamps clips for DG Set any capacity all as specified and directed.

Dismentling the non functional turbo charger for 63 KVA DG set 1500 rpm, any Make from engine and replacing with new turbo assy complete, assembling, testing and commissioning at site complete all as specified and directed.

Dismentling the non functional turbo charger for 40 KVA DG set 1500 rpm, any Make from engine and replacing with new turbo assy complete, assembling, testing and commissioning at site complete all as specified and directed.

Dismentling the non functional turbo charger for 50 KVA DG set 1500 rpm, any Make from engine and replacing with new turbo assy complete, assembling, testing and commissioning at site complete all as specified and directed.

Supply & Replacement of Auto Voltage Regulator complete with wire connection and connected to existing field coil, 24 Volt, DC for cap of DG set 30/40 KVA Make- Kirloskar / Cummins after taking out the unserviceable one.

S & Replacement of Auto Voltage Regulator complete with wire connection and connected to existing field coil, 24 Volt, DC for cap of DG set 63 KVA Make- Kirloskar after taking out the unserviceable one.

S & Replacement of alternator 24 Volt (for charging of battery) for 30 to 63 KVA DG Set Make Lucas after taking out the unserviceable one.

Taking down the u/s self starter and repairs with rewinding to self starter of capacity 12/ 24 Volt by taking out old burnt out copper winding wire with super enamelled copper wire same gauge including replacement of u/s pinion, bush, solenoid coil, carbon brushes & tension spring complete and the DG Sets and testing consider all as specified and directed.

M&L for replacement of air filter of DG set of Cummins/ kirloskar of Capacity 12.5 KVA complete all as specified and directed.

M&L for replacement of air filter of DG set of Cummins/ kirloskar of Capacity 30 KVA complete all as specified and directed.

M&L for replacement of air filter of DG set of Cummins/ kirloskar of Capacity 40 KVA complete all as specified and directed.

M&L for replacement of air filter of DG set of Cummins/ kirloskar of Capacity 50 KVA complete all as specified and directed.

M&L for replacement of air filter of DG set of Cummins/ kirloskar of Capacity 63 KVA complete all as specified and directed.

M&L for replacement filling the Engine Oil DG set complete as specified and directed.

M&L for replacement of fuel filter of DG set of Cummins/ kirloskar of Capacity 12.5 KVA complete all as specified and directed.

M&L for replacement of fuel filter of DG set of Cummins/ kirloskar of Capacity 30 KVA complete all as specified and directed.

M&L for replacement of fuel filter of DG set of Cummins/ kirloskar of Capacity 40 KVA complete all as specified and directed.

M&L for replacement of fuel filter of DG set of Cummins/ kirloskar of Capacity 63 KVA complete all as specified and directed.

M&L for replacement of Lube oil filter of DG set of Cummins/ kirloskar of Capacity 12.5 complete all as specified and directed.

M&L for replacement of Lube oil filter of DG set of Cummins/ kirloskar of Capacity 30 KVA complete all as specified and directed.

M&L for replacement of Lube oil filter of DG set of Cummins/ kirloskar of Capacity 40 KVA complete all as specified and directed.

M&L for replacement of Lube oil filter of DG set of Cummins/ kirloskar of Capacity 50 KVA complete all as specified and directed.

M&L for replacement of Lube oil filter of DG set of Cummins/ kirloskar of Capacity 63 KVA complete all as specified and directed.

S & F in replacement changerover Switch 200 Amp to be fixed to channel and as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed.

Supply and replacement of solenoid coil, 12/ 24 Volts , DC operated with lead and fixing clamps all as directed.

M&L for replacement of hose pipe set (water/ oil) complete with clamp and other fitting as required at site for 63 KVA DG Set of make Kirloskar/ cummins all as specified and directed.

M&L for replacement of hose pipe set (water/ oil) complete with clamp and other fitting as required at site for 40 KVA DG Set of make Kirloskar/ cummins all as specified and directed.

M&L for replacement of hose pipe set (water/ oil) complete with clamp and other fitting as required at site for 12.5 to 30 KVA DG Set of make Kirloskar/ cummins/ Atul Shakti all as specified and directed.

Supply and filling coolant for DG set as per DG set manufacturers recommendations all as specified.

M&L for renewal of battery terminal heavy duty made out of brass suitable for 12 V lead acid battery.

M&L for battery lead made up of copper conductor wire of 23/.016 of any length as required at site for various D G Sets

Supply & filling distilled water in batteries as required at various DG set installations all as specified and directed.

Painting to DG set canopy with spray paint of size 12.5 to 63 KVA after cleaning, srapping and making the surfaces free from rust of main externally and painting with two coats synthetic enamelled paint in black/ blue/ red including marking/ writing on pipe complete as specified and directed.

Supply and laying in replacement of earthing strip GI 32 x 6 mm from earth test point to Electrical equipment including taking up of old UNSV earthing strip complete all as specified and directed.

Supply & Fixing MCCB, 3 Pole, 100 Amps, 415 Volt, 16 kA including connecting up using suitable size of lugs complete all as specified and directed.

Supply & Fixing MCCB, 3 Pole, 125 Amps, 415 Volt, 16 kA including connecting up using suitable size of lugs complete all as specified and directed.

Supply & Fixing MCCB, 4 Pole, 160 Amps, 415 Volt, 25 kA including connecting up using suitable size of lugs complete all as specified and directed.

Supply & Fixing MCCB, 4 Pole, 200 Amps, 415 Volt, 25 kA including connecting up using suitable size of lugs complete all as specified and directed.

Supply & Fixing MCCB, 4 Pole, 250 Amps, 415 Volt, 25kA including connecting up using suitable size of lugs complete all as specified and directed.

Supply & Fixing MCCB, 4 Pole, 400 Amps, 415 Volt, 36 kA including connecting up using suitable size of lugs complete all as specified and directed.

Supply and fix Voltmeter 0 - 600 Volts, Digital display, flush mounted 96mm square 3 phase 4 wire with slector switch complete all as specified and as directed.

Supply and fix Ammeter 0 - 400 Amps, Digital display, flush mounted 96mm square 3 phase 4 wire with slector switch complete all as specified and as directed.

Supply and fixing chlorination dosing pump chemical feeder for injecting calcium hypochlorite employing motor driven reciprocating chemical pump having upto 2 U.S GPD to 40 U.S GPD and adjustable high pressure of upto 100 PSI and 100 ltrs FRP tank with lid & level guage along with agitator and shaft & blade in olastic mounted tank complete all as specified and as directed.

M&L in replacement for Earthing complete with galvanised steel earth plate electrode of size 600x600x6mm thick burried in a pit to a depth of 2.25mtrs below ground level with top edge of earth plate at a depth of not less than 1.50 meters below ground level, earth plate packed on all sides with charcol dust mixed with salt to a thickness of 15cm, connected with earthing lead of 32mmx6mm strip galvanised iron, watering pipe 20mm dia light grade and water filling funnel and mess complete all as shown in plate No 3 of MES schedule part II to the earthing test point, Including PCC Work complete including taking up of old UNSV earthing complete all as specified and directed. (Note :- Earthing lead beyond test point shall be measured separately)

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B1, (using 20mm graded stone aggregate) laid in panel finished even and smooth with using extra cement as in flooring complete all as specified and directed.

Supply only glass dividing strip 3mm thick and 38mm wide in flooring complete all as specified and direcetd.

M&L 75 mm thick PCC 1:3:6 type C2 using( 40mm graded stone aggregate) as in plinth protection/foot path finishing cement concrete even and smooth with out using extra cement complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in surface channels and base of drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc. complete all as specified and directed.

M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick in cement plaster 1:4 on concrete surfaces of ceilling and finished the surface even and smooth without using extra cement all as specified

M&L for two coats of cement base paint incl preparation of new surface of wall complete all as specified and as directed.

M&L for two coats of cement base paint incl preparation of old decorated surface of wall complete all as specified and as directed.

M&L for two coat of oil bound distemper incl preparation of new surface of wall complete all as specified and as directed.

M&L for two coat of oil bound distemper including preparation of old treated surface of wall complete all as specified and as directed.

M&L for 1mm thick (Birla/JK) Wall putty on wall all as specified and directed

M&L three coat of white wash on wall including preparation of new plastered surface and complete all as specified

M&L three coat of white wash on ceilling including preparation of new plastered surface and complete all as specified

M&L preparing Old plastered or unplastered surfaces of wall and applying one coat of white wash on old decorated surface of wall complete all as specfied and direcetd.

M&L preparing Old plastered or unplastered surfaces of ceiling and applying one coat of white wash on old decorated surface of ceiling complete all as specfied and direcetd.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 22 mm thick rubber moulded chequered cement concrete coloured tiles area of each tile exc 0.06 sqm but n.exc 0.12 Sqm , set & jointed in neat cement slurry and pointed with cement & pigment to match the shase of tiles in floors over and incl 20 mm thick screed bed in CM 1:6 including dismantling of chequerred cement concrete tiles complete all as specified and as directed.

M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, ISI Marked, Glossy finish and shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.

M&L in repairs for machine cut mirror polish kota stone slab flooring 20-25mm thich over 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigmen to match the shad of the slab including round nosing at corners rubbing and polishing complete all as specified and directed.

M&L in repairs for machine cut mirror polish kota stone slab 20-25mm thich in riser of step, skirting, dado and pillers over and including 15mm thick rendering in CM 1:4 including rubbing and polishing complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed as specified and as directed.

S&F 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F 150 mm aluminium handles cast type, anodised complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n. exc 4 sqmeach complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.

S&F Mild steel work as in chowkats / frame of door or gates of angle or other section with gusset plate, rail braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guisides) and hanging also fastening and fixing complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 300 mm long mild steel sliding door bolts, ISI marked clip & bolt type, stove enamelled black, with bright bolt not less than 16mm dia with and including minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F 2nd class hard wood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) , supplied and fitted to chowkats complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 150 mm long mild steel pressed handles oval type stove enamlled black complete all as specified and directed.

S&F 200 mm long mild Barrel tower bolt, oval type stove enamlled black with bright bolt and fixed complete all as specified and directed.

M & L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F Mild steel gauzed door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm devided with MS strip of 35x5mm(01 N0) and 02 Nos of 25mmx5mm in four panel covered with galvanised mild steel wire clothes 0.63mm nominal dia of wire and average width of aperture 1.40 mm which is fixd with MS flat of 25x5 mm with nut and bolt of size 25x6mm at every 450 mm distances, shutter with 1 Nos sliding door bolt of 16mm dia 250 mm long with locking arrangement including MS angle iron frame 40mm x 40mm x 6mm as in chowkhat with 6 Nos hold fast of flat iron 30mm x 5mm, 200mm long with bottom flat iron of size 30mm x 5mm and 100mm size 3 Nos butt hinges medium weight including necessary cutting, welding, binding as required, with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified shown on drawing and as directed. (Single shutters of approx width 0.9 to 1.2M and height 1.9 to 2.1 M.)

S & F Mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X5 mm in two panel covered with 1mm thick MS plate black sheet welded to shutters with 2 Nos sliding door bolt of 16mm dia 300 mm long with locking arrangement, including MS angle iron frame 40mm x 40mm x 5mm as in chowkhat with 6 Nos hold fast of flat iron 30mm x 5mm, 150mm long with bottom flat iron of size 30mmx5mm and 100mm size 3 Nos butt hinges medium weight including necessary cutting, welding, binding as required, with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified shown on drawing and as directed. (Single shutters of approx width 0.9 to 1.2M and height 1.9 to 2.1 M.)

Taking down steel/wooden window of any size and description complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilator with top hang shutter including hinges steel pag stay, complete all as specified and directed.

M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted, welded or forged into spikes framed guard bars iron doors ladders framed balusters, walk ways. Railings, frame work of of water tanks and similar work conforming to Fe 410 complete all as specified and directed.

S&F 3 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

All as per Srl item No. 146 here in before but 4.8mm thick frosted sheet glass.

S& F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed.

S&F 0.80 mm thick mild steel plain black sheet in hearths, covering to door chowkhats (frames) chullah hoods, water tanks, water troughs, ducts, urinal trough and funnels etc, cut to size, edge beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel members, etc with plain 40 mm lap joints or welded / riveted seams including bending, turning up, mitred angles, stopped ends, outlets etc as required complete all as specified and as directed.

M&L applying 2 coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation over 10 cm width and girth complete all as specified and as directed.

M&L for Hacking out old broken glass of (any thickness, size, quality or description) from old wooden frame, or stones, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.

M&L PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) for filling in bed block of hold fast etc complete all as specified and direcetd.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

Supply only plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F for CP Health Faucet with 1 Meter Flexible tube & Hook, ISI Marked complete all as specified an directed.

S&F in repairs 15mm dia two way angle valve, cast copper alloy, chromium plated screwed down, high pressure with crutch or butterfly handle complete all as specified and directed.

S&F Jet spray chromium plated with 1mtr heavy PVC hose butterfly type, with chromium plated nuts complete all as specified and directed.

S & F in Repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white, with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.

S&F GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed.

Refixing only serviceable GI tube 15mm dia with new GI fittings and fixed to wall, ceiling or laid in floor and ceiling and wall including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed.

S&F GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed.

Refixing only serviceable GI tube 20mm dia with new GI fittings and fixed to wall, ceiling or laid in floor and ceiling and wall including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed.

S&F rotational moulded polethylene water tank of 500 ltrs capacity, white colour, ISI Marked (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as specified SSR Part- I including dismantling of existing water tanks capacity n exc 500 ltr complete all as specified and directed.

S&F rotational moulded polethylene water tank of 1000 ltrs capacity, white colour, ISI Marked (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as specified SSR Part- I including dismantling of existing water tanks capacity n exc 1000 ltr complete all as specified and directed.

S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms) complete all as specified and directed.

S&F 20 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground post embedded in concrete, brick work, masonry etc complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50m and making good sufrace in soft/loose soil complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation/mass concrete complete all as specified.

S&F MS angle post & struts as arms over compound wall in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long and dia meter of neck in mm n exc. 12mm.

Supply and Fixing in repair chain link fencing including line wires, any mesh size and type of any type of standards, rails, straining bolts etc including provision of binding wire. Wt 3 to 4 Kg per Sqm complete all as specified and directed.

M&L for 10mm dia and over mild steel TMT bars, cut to length , bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, quality of steel conforming to demormed or twisted bars Fe-410-W (Gde E-250) complete all as specified and directed.

S&F in repairs Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rail straining bolts including securing or tying at crossings with and provisons of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured) complete all as specified and directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465x 355x 265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F (in repairs) Bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.

S&F in repairs angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.

S&F in repairs Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repair swivel shower rose of brass Chromium plated for fixing with 15mm pipe fixed all as specified

S&F in repair vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe all as specified

S&F 15mm bore pillar tap cast copper allloy with capstan head Chromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed.

Supply only 32mm dia wast fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed.

S&F PVC connection 15mm bore length not less than 300 mm long with both ends PTMT nuts complete all as specified.

S&F in repair CP towel rail 20mm dia, 450 mm long between flanges complete all as specified and directed.

S&F in repairs Glass shelf 500x125mm complete all as specified and directed. (Make : Prayag Cat Part No BEA 45 or equivalent as approved by GE)

S&F in repair 600mmx450mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer complete all as specified and directed.

Providing & fixing in repairs false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

M&L for preparation of sunken floor and applying a coat of hot bituminous primer @ 0.30 kg/sqm and applying a coat of industrial bitumen 85/25 @ 1.20 kg/sqm over primer and laying modified polymeric water proofing membrane(weight not less than 3 kg/sqm 2 mm thick consisting 100 mm micron HMHDE FILM) and applying one coat of industrial btumen grade 85/25 @ 1.2 kg/sqm on top of membrane with 100 mm overlap at side end lap where required over 10 mm thick rendering in CM 1:4 including integral waterproofing compound 3% and taking down existing plastering as per manufacturer instruction and complete all as specified and directed

M&L 6mm thick Asbestos Cement, one piece plain angular ridge in roof fixed with L Type or J type or crancked hook bolt etc

M&L in repairs 6mm thick Asbestos Cement, Corrugated or Semi corrugated sheets in roof, wall fixed with L Type or J type or crancked hook bolt etc

S&F in repairs Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws to steel frame work, as specified.

S&F in repairs Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws to steel frame work, as specified.

S&F 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints fixed to wall all as specified

S&F 75 mm bore PVC (SWR) bends complete all as specified and directed.

S&F 75 mm dia stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to ball or roof complete all as specified and directed.

S&F 110mm bore PVC(SWR) junction single (single T) equal or unequal with access door complete all as specified and directed.

S&F 110 mm PVC (SWR) bend any radius complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 100mm dia stack clamps out of 50mmx5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to ball or roof complete all as specified and directed.

M/S CHAUHAN ELECTRIC WORKS

UTTRAKHAND BUILDERS