Dismantling Relaying of Weathering course, Pressed Tiles Electrical arrangements at Council Hall at Rajaji Building.

Amount

Premeasurement for dismantling the Weathering Course work including all cost and convenyance at materials to site and all labours charges etc., complete.

Providing steel centering for sides and soffits of cement concrete works including necessary arrangements with strutting for plain surfaces with props, With all cost and conveyance of materials and lab our at site ect ., Complete as per standard specfication.

Supplying , fabricating and placing in position of MS or RTS rods for cutting, bending, straightening of rods and tying the grills for reinforcementwith necessary binding wire including all cost and conveyance of materials to site with all labour cost ect.,complete as per standard specification.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.

Weathering course with brick jelly concrete using 20mm gauge broken brick jelly mixed with slacked lime concrete 1:3 including all cost of materials and labour charges etc., complete.

Finishing the roof with best 20 x 20 x 2 cm hydraulic pressed tiles with 1:3 c.m. pointing with the same mortar including all cost etc., complete.

Plastering with c.m. 1:3 (one cement and threesand) 10mm thick including all cost of materials and labour charges etc. complete.

Supplying and fixing the door window, ventilator all cost and labours etc., complete

Painting two coats with approved interior and exterior emulsion paint over cement plastered wall surfaces, ceiling and other new surfaces including Cleaning preparing the surface and curing etc., complete as per standard specification

Painting two coats with best quality enamel paint over New iron work including all cost of material and labour charges etc, complete

20W LED Tube Light for T8 Fitting (Single Side)

63 Amps Three Phase 500V 4 Pole Change Over Switch

25A Flush type Wall Socket with 25A DP MCB for AC Plug

Supply and fixing of wall Mounting fan 400mm Sweep including all cost and conveyance of materials and labour charges etc., complete.

Supply and fixing of 9W LED Spot light including all cost and conveyance of materials and labour charges etc., complete.

Supply and fixing of Table Mike including all cost of labour charges materials etc complete.

Supply and installation of Anutone (or) Equivalent Brand of Acoustical False Ceiling of Sisoli Serene / Slate Spirts / Slate Polka Mineral Fibre/ GRG Core Ceiling Tiles of size 595 x 595 x 15mm having volume density 270 kgs / m3, weight 4kg / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. The skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally skelet CT15 W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15 W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. Sisoli Serene / Slate Spirts / Slate Polka of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. The systems to achieve noise reduction coefficient not less than 0.5 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, Scaffolding, transportation, conveyance, etc., complying to standard specication.