Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.3 LAccepted-AOC | L1 | Accepted-AOC Reasonable lowest tenderer | |
| 2 | L2₹31.6 L+₹3.1 L (10.9%)Rejected-Finance | L2 | Rejected-Finance Not Lowest tenderer | |
| 3 | L3₹32.2 L+₹3.7 L (13.1%)Rejected-Finance | L3 | Rejected-Finance Not Lowest tenderer | |
| 4 | L4₹32.6 L+₹4.1 L (14.3%)Rejected-Finance LABU RAM STREET KOTKAPURA PB 151204 | KOTKAPURA | FARIDKOT | PUNJAB | 151204 | L4 | Rejected-Finance Not Lowest tenderer | |
| 5 | L5₹32.9 L+₹4.4 L (15.4%)Rejected-Finance OLD PULL MADIYA JAIRAMPUR AZAMGARH AZAMGARH UTTAR PRADESH 276001 | AZAMGARH | UTTAR PRADESH | 276001 | L5 | Rejected-Finance Not Lowest tenderer |
Tender Value
₹34.9 L
EMD Value
₹69,800
Closing Date
12 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(East) Ferozepur cantt
GE(East) Ferozepur cantt
SPL REPAIR TO BLOCK NO P-6 COMPRISING OF 12 GOVT MD ACCN AT Q ZONE OF GRENADIERS UNDER GE (EAST) FEROZEPUR CANTT
2023_MES_614050_1
8130/GE/E/FZR/23-24
Open Tender
Civil Works
Item Rate
180 days
GE(East) Ferozepur cantt
Please refer documents
8 documents required · 8 mandatory
₹500
Yes
GE(East) Ferozepur cantt
₹69,800
Yes
2 Nov 2023
17 Aug 2023
15 Sept 2023
17 Aug 2023
12 Sept 2023
31 Aug 2023
Amount
B/R WORK Demolition of un reinforced cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed.
M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in roof kerbs or mud stops, bed blocks,back filling in chowkhats, benching etc including necessary form work complete all as specified and directed.
Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.
M&L for 40mm thick, Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in flooring, surfaces finished even and fair without using extra cement complete all as specified and directed.
M&L for 50mm thick Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection, surfaces finished even and fair without using extra cement including provision of construction joints complete all as specified and directed.
M&L for 25 mm thick cement concrete (1:2:4) type B-1 using (20 mm graded crushed stone aggregate) as in sub base of flooring,surface finished rough to receive floor topping complete all as specified and directed.
Dismantling floor hearth or wall/stone tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M & L for Joint less coloured Non - skid Ceramic tiles (colour & shade as approved) 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bedding 15mm thick in cm(1:6), complete all as specified and directed.
M & L for joint less coloured Non - skid Ceramic tiles (colour & shade as approved) 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,as in skirting or vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to matchover and including 10 mm thick rendering in cement mortar (1:4), complete all as specified and directed.
M&L for Glazeded ceramic coloured (colour & shade as approved) tile 350x250x7 mm/450x300x7mm thick in vertical surface such as skirting / dados set and jointed in neat cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white/ coloured cement with pigment to match the colour of tiles complete all as specified and directed.
M&L for Machine cut kota stone slab 18-20 mm thick as in flooring of size not less than 0.25 Square metre each, set and jointed in cement slurry over& including screed bed of 20 mm thick in cement mortar (1:6) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing complete all as specified.complete all as specified and directed.
M&L for Machine cut kota stone slab 16-18 mm thick as in skirting,dado of length not less than 500 mm each unit, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing complete all as specified and directed.
M&L for Granite (of any type) tiles18- 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 10 mm thick plaster as in back coat CM 1:4 complete including making circular gas pipe hole, moulding at corners and polishing type all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
Dismantling of brick tiles single layer laid on roof jointed & pointed in cement mortar complete all as specified and directed.
Demolition mud in roofs, any thickness, including plastering and leaping etc complete all as specified and directed.
M&L for 10 mm thick cement plaster on roof surfaces in cement mortar 1:3 finished fair and even without using extra cement complete all as specified and directed.
M&L for Polythene film 150 micron thick laid on roofs with 150 mm overlaps including a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm complete all as specified and as directed.
M&L for Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm over a coat of bitumen primer @ 0.30 ltr per sqm including preparation of roof surfaces complete all as specified and as directed.
M&L 80 mm thick average consolidated thickness mud phuska on flat roofs including 25 mm thick mud plaster etc complete all as specified complete all as specified and directed.
M&L for 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed.
All as per srl item No 21 here-in-before but using old brick tiles retrieved from dismantling ( Item No 15 here-in-before) including cleaning and removal of mortar from tiles complete all as specified and directed.
Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specifide. complete all as specified and directed.
M&L brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in c:m 1:6 complete all as specified and directed.
All as per srl item No 24 here-in-before but using old bricks retrieved from dismantling under ser item 23 here-in-before including cleaning and removal of mortar from old bricks etc complete all as specified and directed.
Taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified. complete all as specified and directed.
M&L for Rendering/ plastering 15mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.complete all as specified and directed.
M&L for Rendering/ plastering 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.complete all as specified and directed.
M&L for Rendering / plastering 10 mm thick on ceiling surfaces in cement mortar 1:4 finished fair and even without using extra cement complete all as specified and directed.
M&L for Preparation of new plastered surfaces of ceiling & applying two coats of white wash complete all as specified and directed.
M&L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L for 2mm thick wall care putty on wall complete all as specified and directed.
M&L Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and directed.
M&L Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on old surface of wall including complete removal of existing surface complete all as specified and directed.
M&L for Preparation of newly plastered surfaces of walls etc., and applying two coats of cement base paint complete all as specifiedcomplete all as specified and directed.
M&L for Complete removal of existing treatment including preparation of surfaces of walls & applying two coats of cement base paint complete all as specified
M&L for Complete removal of existing treatment including preparation of surfaces of walls & applying two coats of white wash complete all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and removing from site to store or otherwise as directed complete all as specified and directed.
All as per srl item No 39 here-in-before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and directed.
Taking down shutters of any description,exc.1.0 sqm and not exc.2 sq. m each , easing, adjusting and refixing in same opening complete all as specified and directed.
Taking down shutters only of any description exc 1 sqm and not exc 2 sqm each including removing from site to store or otherwise as directed complete all as specified and directed.
S&F Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 125mm x 60 mm including one shop coat of red oxide primer complete all as specified and directed.
S&F Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 105mm x 60 mm including one shop coat of red oxide primer complete all as specified and directed.
S&F 35mm thick, 2nd class hard wood (Hollock), plain framed, paneled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-8 complete all as specified and directed.
S&F 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed.
S&F Factory made box type steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019/08 & CEJZ/TD-1020/ 08
S&F Factory made box type steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019/08 & CEJZ/TD-1020/ 08
S&F Steel windows or ventilators, fixed type, with glazing bars including one shop coat zinc chromate primer complete all as specified and directed.
M&L for Mild steel framed work conforming to Fe 290. Gde E-165 as in grills/guard bars shouldered with steel window/ ventilator frames including red oxide primer coat complete all as specified and directed.
S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC "C"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles & rails with suitable PVC sheet beading and jointed togeather with solvent cement complete all as specified and directed.
M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L for Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide priming complete all as specified and directed.
M&L for Preparation of primed steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
M& L for Preparation of old painted wood or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M& L for Preparation of old decorated surface of steel and iron of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified and directed.
S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and directed.
S&F PTMT door handle, 150 mm long and fixed with steel screws complete all as specified and directed.
S&F Mild steel pressed door handles, over type, stove enameled black, 150mm long and fixed with steel screws complete all as specified and directed.
S&F Mild steel barrel tower bolts, stove enameled black, with bright bolt, 150 mm long and fixed with steel screws complete all as specified and directed.
S&F 300 mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12 mm dia with and including bolts and nuts complete all as specified and directed.
S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.
S&F 300 mm mild steel ordinary rat tail spring including roller and roller plate complete all as specified and directed.
S&F in repair butt hinges, 100mm long of mild steel, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and directed.
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
All as per Item No 67 herein before but fixed in repairs
Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, glazed with putty or fixed with beads complete all as specified and directed.
S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified and directed.
Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed.
All as per item No 71 here-in-before but 20 mm bore tubing.
M&L for GI steel water tubing, 15mm bore medium grade galvanized with all fittings and fixed to walls and celling or laid in floor, complete all as specified.complete all as specified and directed.
All as per item No 73 here-in-before but 20 mm bore tubing.
Fixing only,after cleaning old steel water tubing,15 mm bore and connections in new or old position using new fittings complete all as specified and directed. (Note:- seviceable pipes obtained from item 71 to be reused).
All as per item No 75 here-in-before but 20 mm bore ( Note;- Serviceable pipes obtained from item 72 to be reused).
S&F in repair stop valves, fancy type, CP with long shank and cup ( concealed type ), screwed both ends for 15mm bore of iron pipe or for union and fixed all as specified. complete all as specified and directed.
S&F in repair piller taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed complete all as specified and directed.
S&F in repair Gunmetal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
S&F in repair Gunmetal gate valve of 15mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
S&F in repair bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F brass CP Angle cock with long shank/flange and cup (concealed type) 15 mm dia bore screwed down with crutch handle both end screwed for iron pipe or union as fixed in repairs complete all as specified and directed.
S&F in repair PVC waste pipe 32 mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks / WHBs complete all as specified and directed.
S&F in repair Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450 mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and directed.
S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank all as specified in SSR Part-I complete all as specified and directed.
S&F 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.
S&F in repair Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed.
S&F in repair PVC 10 ltr. Capacity valveless syphonic action type, flushing cictern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc. complete all as specified and directed.
S&F in repair Vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified and directed.
S&F 1mm thick stainless steel sink with dranage board, plugs, washers, PVC waste pipe, union, CP cuppling & cantilever brackets embedded in cement and sand mortar in wall, overall size 915mmx460mm bowl size 410mmx330mmx160mm as in repair complete all as specified and directed.
S&Fin repair PTMT grating doom 100mm dia with or without waste hole fixed in repairs complete all as specified and directed.
S&F in repair 125 mm chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed.
S&F Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed to walls with steel screws and wooden/rawl plugs as in repairs complete all as specified.complete all as specified and directed.
S&F Stainless steel soap dish (not less than 1mm thick) of type as directed,fixed to walls with chromium plated brass screws with wooden/rawl plugs,in repair complete all as specified and directed.
Taking down eaves gutters and rain water pipes( any size or pattern),including all fittings heads shoes bends swan-necks etc complete all as specified and directed.
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed.
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed to walls or laid in trenches complete all as specified and directed.
S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.
S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.
S&F 75mm dia Junction single (Single or double T) equal or unequal complete all as specified and directed.
S&F 110mm dia Junction single (Single or double T) equal or unequal complete all as specified and directed.
M&L PVC (SWR) floor trap 75 mm, plain with PVC grating including jointing with solvent cement etc., complete all as specified and directed.
S&F Mild steel curtain rod powder coated with fixing side brackets,end cups,rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified and directed.
M&L for 10 mm thick rendering over concrete surface of sunken floor in CM 1:3 and applying bitumen blown any grade two coats to concrete surface / rendering at the rate of 1.5 kg per sqm per coat and treating the sunken floor all as specified and directed.
M&L for water proofing treatment to RCC sunken floor including wall comprising with the following course of treatment/ specifications form bottom to top:- (a) Applying bituminous primer @ 0.40 ltrs per sqm over plastered surfaces of floor including wall surfaces for treating the sunken floor all as specified and directed by Engr-in-Charge. (b) One layer of APP based polymeric membranes of approved manufacturers, 4 mm thick, weight not less than 4.0 kg/sqm, reinforced with non woolen polyster fabric or weight not less than 160 gms/sqm. Polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet walls and shall be finished by a membrane flashing. Note: (i) Laying of APP based membranes shall be done by torch on method or as per manufacturer's instructions. (ii) A minimum overlap of 100 mm and 75 mm should be made in the end sides of polymeric membranes respectively and sealed all overlaps and joints as manufacturer's instructions.
M&L for Cement concrete (1:5:10) type E-2 using 40 mm graded stone aggregate as in filling in sunkan slab or in mass concrete complete all as specified and directed.
Surface dressing n exc15 cm deep in soft loose soil complete all as specified and directed.
M & L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, jointed and pointed with gray cement and no pigment over sand cushioning complete all as specified and directed. (Note:- sand cushioning shall be measured and paid separetel)
M & L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
S&F PVC cup boards/ Shelf / Partition of required size consisting of panel of 18mm thick Celuka PVC Ply and for supporting the hold of Shelf/ Partition and shall provided 3 edges in size 18mm x18mm as per required length. The front side of the edge visible in the front of the shelf/ Partition to be edge lipped by 18mm width x 1mm thick PVC sheet using solvent cement etc. complete all as specified and directed.
Dismantling timber in fillets, rails, posts, rafters, purlins, etc; under 40 sq. cm in each section, fixed in any position as in framed work complete all as specified and directed.
M& L for Mild steel framed work of Fe-290 (Gde E-165) as in doors or gate of angle or other section with gusset plates,rails, braces etc and fixing complete all as specified and directed.
M&L for Mild steel, plain, black sheet 1mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
Demolition of reinforced cement concrete in any position not otherwise specifically provided for ( reinforcement cut as required to facilitate demolition) complete all as specified and directed.
M&L Reinforced cement concrete nominal mix (1:2:4),type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) rough surfaces of concrete complete all as specified and directed.
S&F mild steel TMT bars as in reinforcement 10mm dia and over cut to length,bent to shape required including cranking, bending spirally for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & directed.
E/M WORK Taking down carefully existing copper/ alumimium point wiring for light/ fan/ socket out let points complete with fitting and fixtures, battens, wire etc and making good the disturbed surfaces of walls and ceilings, complete all as specified.
Taking down unserviceable main switches, distribution boards single phase/ three phase, complete all as specified.
S&F Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/ sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed, stranded (Green colour) connected to common earth dolly complete all as specified for following:- (a) One light/ fan/ exhaust point controlled by one single pole one way switch. (Note:- wiring shall be done in colour coding)
All as per item No 121 here in before but One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board.
All as per item No 121 here in before but One 3 pin 5 Amp socket outlet point controlled by one switch on same board.
All as per item No 121 here in beforeove, but one switch socket outlet multi purpose, 3 pin, 15 Amps, point to be controlled by one switch and wiring with 2.5 Sqmm PVC FRLS cable, insulated, stranded, unsheathed copper conductor on Independent board with continuous earth wire of size 2.5 sqmm, PVC copper conductor, insulated, unsheathed, stranded, complete all as specified and directed.
All as per item No 121 here in before, but one switch socket outlet multi purpose, 3 pin, 15 Amps, point to be controlled by one switch and wiring with 4.0 Sqmm PVC FRLS cable, insulated, stranded, unsheathed copper conductor on Independent board with continuous earth wire of size 2.5 sqmm, PVC copper conductor, insulated, unsheathed, stranded, complete all as specified and directed.
S&F 6 amps, single pole, one way switch urea back piece (IP20), 240V, 50Hz, white in colour, duly ISI marked complete all as specified and directed.
S&F Switch piano flush type 20 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed.
S&F 6 Amps Socket 2 in 1, Urea backpiece (IP20), white in colour, duly ISI marked complete all as specified and directed.
S&F Socket outlet, UNI, 2 in one 10 Amps & 20 Amps, white in colour, duly ISI marked complete all as specified and directed.
S&F Bell push flush, type 6 amp single pole one way, white in colour, duly ISI marked complete all as specified and directed.
S&F Door Bell Ding Dong single phase 240 volts, white in colour, duly ISI marked complete all as specified.
S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed.
S&F batten holder (with metal ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza.
S&F Rotary stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, deluxe, white in colour, duly ISI marked complete all as specified.
S&F 20W, 6500 K, 4 feet LED Square tube light fitting, energy efficient fixed to wall/ ceiling etc complete all as specified and directed.
S&F LED bulb of 9 watt, B22, 6500K all as specified and directed.
S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/ 66 protection complete all as specified and directed.
S&F Exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified and directed.
Supply and fix fresh air fan 250mm size including making of hole/opening in wall complete all as specified and directed .
M&L for Cutting hole for grouting nuts & bolts for fixing of exhaust fans, making good, the disturbed surface to match with the existing surface complete all as specified and directed.
Fixing or hanging only ceiling fans height upto 3mtr to 5 mtrs ceiling height of bldg including three core FR PVC Insulated & overall round sheathed flexible with PVC, colour of cores are Red, Black & Yellow/ Green is for earthing. Sheath colour is Black of cable size 23/0.0076 complete all as specified and directed. Note : Ceiling fans obtained/ taking down from item Sr No.119 as above shall be reused.
R.S.ENTERPRISES
M/s Surjit Singh and bros
M/s Harkesh Kumar Bansal
ABHISHEK AND COMPANY
M/s Sarup Singh
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .