CERTAIN PETTY REPAIRS IN MD ACCN AT DOGRA FARM, RAINA ENCLAVE, CEMETARY AREA, SALARIA ENCLAVE, PIRU SINGH ENCLAVE AND ADJACENT AREA UNDER AGE B/R-II OF GE (NORTH) MEERUT CANTT

Attending complaints related to plumbing/water supply and obtaining completion from user including minor repair such as replacement of washers, tightening of taps, tightening of check nuts/unions/sockets /PVC connection etc and making water supply functional in case of blockage, refixing of GI pipe joints, application of white cement where required, complete all as specified and directed. Note : (I )Only experienced 01 Nos plumber shall be used to attend day to day complaints for above mentioned complaint shall be issued under respective item. (II) Contractor or his representative shall collect the complaints at 0830hrs from complaint cell of AGE B/R-II and the complaints shall be attended / make good/rectified within 24hrs on receipt of the complaints and info the status of the complaint at 1700hrs every day to complaint cell. On failure of the same a penalty of Rs 250/- per day per complaints shall be charged.

Attending complaints related to carpenter work and obtaining completion from user including repair/easing of doors re-fixing or tightening of doors, windows, resecuring of door/window wire guage, (fixing only) builders hardwares, helical door spring including use of all types of nails, screws etc which are required to make good the work, complete all as specified and directed. Note :- (I)Only experienced 01 Nos carpenter shall be used to attend day to day complaints for above mentioned complaint shall be issued under respective item. (II) Contractor or his representative shall collect the complaints at 0830hrs from complaint cell of AGE B/R-II and the complaints shall be attended / make good/rectified within 24hrs on receipt of the complaints and info the status of the complaint at 1700hrs every day to complaint cell. On failure of the same a penalty of Rs 250/- per day per complaints shall be charged.

Taking down chowkat or frame with shutters including fitting and fixtures area not exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkat or frame with shutters including fitting and fixtures area exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm but n. exc 2 sqm each including tiling, fixtures etc complete all as specified and directed.

Supply & fixing Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, including stainless steel hinges, lock strike plate, etc., including a coat of red oxide primer complete, as specified and directed.

M&L for plain cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in filling of pressed steel frame, chowkats, hold fast blocks and other similar items etc complete all as specified and directed.

S&F steel windows with pressed steel frame made out of 1.25mm thick steel with one or more rebate with glazed shutters and fly proofing shutters including guard bars, hinges, peg stay, handles, tower bolts, lugs including treated with for or coat tar black paint on steel surface in contact/embeded in concrete/masonry work complete all as specified and directed.

S&F steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

S&F 35mm thick made of 2nd class hardwood Plain framed, panelled shutter with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35 mm thick, 2nd class hard wood (Sal/ Hollock) factory made glazed and skeleton shutters, open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge, sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (b) for door shutter supplying and fitted to chowkats, complete all as specified and directed.

S&F Fe - 290 (Gde E- 165) for Framed work as in doors , chowkhats or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, support to velley gutters, windties for roof sheets, framing for monkey proofing, welded mesh, support to sign board & fencing post, etc as specified to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face pannels, commercial type on both sides, complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and as directed. Note :- Stainless steel butt hinges and necessary S S crews shall be paid separately.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note :- (i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. (ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M&L for preparation of new wooden surfaces & applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

Taking down and refixing door shutters of any description of area exc 1.0 Sqm but n.exc 2.0 Sqm each in the same opening including easing of door/window/cup board shutters for easy closing/ opening incl tightning of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts etc complete all as specified and directed.

M&L for welding in repairs of loose joints of sliding doors, hinges, siliding door bolts, garrage doors, windows, doors, northlight framing, monkey prrofing framing etc inc at any height & inc necessary cutting and grinding complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth, 0.63 mm nominal dia. of wire and avg width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire stples complete all as specified and directed.

S&F in repairs 4.8 mm thick sheet glass fixed on aluminium door/frame/windows including rubber beading, roller complete as per site reqmt suitable mean in square exc 0.50 sqm each pane, complete all as specified and directed.

Hacking out old broken glass any size thickness from steel/wooden frame including removing MS cleats punching or drilling out old glazing pins/springs etc complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads in square n exc 0.50 sqm each pane complete all as specified and directed.

S&F 100mm long SS dash fasteners complete all as specified and directed.

S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 150mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 200mm long aluminium anodised, barrel tower boltls of extruded sections and fixed complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe complete all as specified and directed.

Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore complete all as specified and directed.

S&F in repair Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 500 ltrs, including 20 mm bore Ball PTMT valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed and dismantling of old water tank complete all as specified and directed.

S&F in repair Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 1000 ltrs, including 20 mm bore Ball PTMT valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed and dismantling of old water tank complete all as specified and directed.

S&F in repairs 15mm bore Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs 20mm bore Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs vitrious china squatting pan Orissa pattern size 580x440mm white with integal foot rest, including concrete bedding, P or S trap lime concrete bedding and all internal fitting, inlet, outlet pipe connections etc & making good floor complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white with 'P' or 'S' trap (excluding flushing cistern and flush pipe) including seat and cover and connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S&F in repairs PVC valveless flushing cistern 10 Ltr capacity (white), syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flushing pipe complete all as specified and directed.

S&F in repairs Vitreous china wash hand basin, white flat, size 550 x400 mm including brackets, waste coupling and waste pipe complete all as specified and directed.

S&F in repair 15 mm bore bib taps standard of PTMT any colour high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed. (Min weight 15mm - 90gms)

S&F in repairs CP bib tap 15mm bore cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm bore Pillar taps, Swan neck cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-Nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs CP angle valve 15mm bore cast copper alloy fency type, chromium plated with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs Wall mixer 3-in-1 way telephpnic/Non telephonic long sank 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs EWC seat cover with fittings (hinges) complete all as specified and directed.

S&F in repairs sink cock swan neck 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs centre hole basin mixer 15mm bore, cast copper alloy, chromium plated, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) complete all as specified and directed.

S&F in repairs PVC connection fibre reinforced 450/600mm long with brass check nuts and PVC washers at both ends complete all as specified and directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs PVC waste pipe 32 mm dia complete all as specified and directed

S&F in repairs for cast copper alloy chromium plated shower rose 150mm with chromium plated sqaure arm rod 450mm long complete all as specified and directed.

S&F in repairs of brass adjustable rod for centre hole WHB mixer inc round washers and packing as per site requirement complete all as specified and directed

S&F in repairs brass adjustable legs for wall mixer incl washers and packing as per site requriment complete all as specified and directed

S&F in repairs 15/20mm CP/brass spindle for Bib cock, stop cock, pillar tap, angle wall, wall mixer etc half or full turn of any description complete all as specified and directed.

S&F in repairs water tank cover made of 1mm thick GI sheet as per sample kept in office of AGE B/R-II and fixed with gypsum screw for capacity of water tank n. exc 1000 ltrs complete all as specified and directed.

S&F in repairs chrominum plated brass jet spray of 15mm bore sutible for fixing in EWC complete all as specified and directed

S&F in repairs Health faucet (ABS Body) chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs acrylic bathroom corner shelf of (suitable for MAP Qtrs) (Sample kept in AGE B/R-II Office) fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs 16/18/20 inches long SS sliding channel for drawer complete all as specified and directed.

S&F in repair mild steel drapery rod of size 20mm inner dia (in lengths as directed) of approved colour with and including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plugs and screws on walls/beam complete all as specifed and directed.

S&F in repairs CP kitchen sink waste coupling of size 100mm complete all as specified and directed

Taking down cement plaster or cement lime plaster on stone surface/brick surfaces of walls including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed .

M&L for rendering 15 mm thick on brick or concrete other than fair surfaces in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on brick or concrete other than fair surfaces complete all as specified and directed.

M&L for 5mm thick rendering on concrete surface of ceiling with cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and directed.

M&L including preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper over a coat of chalk whiting, on plastered surfaces, prepara-tory to distempering complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint (weather proof) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying a coat of oil bound distemper complete all as specified and directed.

M&L for applying two coats of white wash on old decorated surfaces of walls complete all as specified and directed.

M&L for prepration of old steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coat of synthetic enamel complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier complete all as specified and directed.

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium red & high density plastic ball screwed for iron pipe(minimum weight 20mm-210gms) complete all as specified and directed

S&F in repairs 15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 15mm-142gms) complete all as specified and directed

S&F in repair door closer hydraulically regulated aluminium (extruded section body) designation No 3, universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kgcomplete all as specified and directed

S&F in repairs 12mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified and directed

M&L 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded of chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 18/19mm thick Medium density fiber board interior grade with decorative face veeners on both faces and lipping as in repairs complete all as specified and directed.

Demolition of brick work / stone masonry built in cement mortar complete all as specified and directed.

M&L brick work with fly ash old size bricks, straight or curved on plan exceeding 6 cm mean radius built in cement mortar 1:6 complete all as specified and as directed.

All as per item No 83 above but except bricks any types but curved on plan to any radius complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable to store and rubbish off the premises complete all as specified and directed.

S&F Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles laid over and including 15mm thick screed bed or bedding layer CM 1:6 for laying floor finishes complete all as specified and directed.

S&F coloured Glazed ceramic tiles in vertical surfaces (450x300x7mm/600x300x7mm) set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surfaces including 10mm thick back coat in CM 1:4 complete all as specified and directed.

M&L Non-skid light shade ceramic tiles 7 to 8mm thick (square/ rectangular) scracth resistant, joint free polished area of each tile exc. 0.18 Sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles laid over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete as specified and directed.

All as per item No 88 above but as in skirting over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed

S&F 110mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F powder coated aluminium frame and stainless steel ring to hold 110/75mm pipes in place at 1mtr c/c to be fixed to wall as per site requirement all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed.

S&F 75 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Please Enable Macros to View BoQ information