Spec. No.38/20-21 dt 13.10.20

Amount

Erection of RSJ pole 40'

Erection of PSC pole 9m

Erection of 22KV structure materials

Erection of 22KV AB switch with PT insulator

Erection of 22KV HG Fuse set

Provision of 22KV sturcture Earthing

Erection of V Cross arm

Erection of HT TI fitting

Provision of Jumpering arrangements

provision of Stay set Complete with Guy Shackle

Provision of Structure Concreting

Erection of 22KV strain disc with Mp

Erection of 22KV Pin insulatore with pin

Paving of ACSR 7/4.09 Conductor

Earth work excavation in all kinds of soils within an Initial lead of 10m and lift of 2m in trenches (Narrow pits)

Providing Sand bedding with good quality of m sand to a depth upto 150mm (6"0) including cost of materials, labour leads and lifts etc., complete and Cable Laying

Uncoiling and laying of 33KV HT cable in the excavated trench including drawing the cable through RCC /GL/PVC pipes wherever necessary at road crossing etc without of cables, tools and palants labour lead, lifts etc complete

Refilling with excavated earth, consolidating in layers and the tope brought for line with the existing surface including cost of labour cost lead lift etc.., complete

Suppl and erection of Cable marker in RCC ( 1;2;4) using 20 mm HBS metal of size 0.3m X 0.60 m and of 100 mm thick, engarving letters " TNEB UG CABLE " Painting the engraved letters, fixing the cable marker in a bed of PCC (1;3;6) using HBS metal of size 0.45m X 0.30 m X 0.45m including cost of all materials, labour, Transporting to the destination. all leads and lifts etc., complete

Supply and Erection of RCC 33KV "V" troughs and laying over the ug cable to proper grade and alignment inside the cable trench, printing letters of not less than 75mm on either side of the troughs as directed by the Engineer incharge of works including the cost of all materials, Transporting of trough from the source to the destination upto 10kms stencilling, paints, brushes all leads and lifts etc..,