Providing Roofing Shed, Footpath Improvement works at N.P. Ittery Park II in Ward No 95, South Zone.

HGS SS.20.B. Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS.20B

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm nsize ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification.

Supply and erecting shuttering including necessary supports for plane surfaces such as RCC column, footing, plinth beam, stair case etc., in all floors using mild steel sheets of 90cm X 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification and as directed. Sl.No.122

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Supplying and Laying TAMIN Block Providing and laying of 80 mm thick high strength type conforming IS 15658 -2006 of TAMIN Paver Block in size of minimum compressive strength of 40 N/mm2 In uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring the paversl sweeping transporting loading unloading of laying paver block as per the standard specifications

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. (Sl.No.404)

Providing and fixing GI (Galvanized Iron) roofing sheets of approved quality and required thickness, including cutting to required size, overlapping, alignment and fixing with galvanized iron J/L hooks or self-drilling screws with GI washers and bitumen/neoprene washers, including necessary nuts, bolts and other accessories; including all labour, scaffolding, tools and plants, transportation, loading and unloading, and all incidental charges, complete as required and as directed by the Departmental Officers.

Supplying, fabricating and fixing Mild Steel (MS) angle iron/structural steel framework for supporting GI roofing sheets, using MS angle sections of suitable size and thickness, including cutting, straightening, drilling, welding and fabrication, providing necessary cleats, brackets, bolts, nuts and welding electrodes, transportation, loading and unloading, erection and fixing in position, including all labour, tools and plants and incidental charges, complete as required and as directed by the Departmental Officers.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors. (Sl.No.368)

Add :- GST @ 18%