PROVISION OF HARD STANDING WITH COVERED EQUIPMENT PARKING WITH RCC ROOF AND AIR CONDITIONERS FOR CONFERENCE ROOM AND CCTV MONITORING STATION OF STATION HEADQUARTERS UNDER GE I GOS

Amount

M & L for Site Clearance in soft/loose soil complete all as specified and directed

Excavation in trenches n exc 1.5 Mtr wide and n exc 1.5 M deep and getting out in soft/loose soil (including cutting of roads) for shafts, wells, man holes and for sewage lines and foundation etc n exc 10 Sqm on plan all as specified.

M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc complete all as specified and directed

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams ,and similar work; vertical or to batter for rough finished surfaces of concrete surfaces complete all as specified and directed

M & L for formwork to sides of square pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete surfaces complete all as specified and directed

M & L for formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers ,lintels, cantilevers, shelves including supports, overhangs,etc. lsosplays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and directed surfaces

M & L for formwork to chajjas,troughs and similar items including edges for rough finished surfaces of concrete surfaces complete all as specified and directed

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete surfaces complete all as specified and directed

M & L for formwork to edges of concrete flats, treads, breaks in floors,window cills,concrete railings,openings in concretewalls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontalor sloping andsimilarwork exc 10cm but n exc 20cm wide for rough finished surfaces of concrete surfaces complete all as specified and directed

M & L for Formwork to staircases with sloping or stepped soffits including risers and stringers (excluding landing) for rough finished surfaces of concrete surfaces complete all as specified and directed

M & L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M & L for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M & L for reinforced cement concrete (designmix) in M-30 (20mm graded aggregates) for foundations, including rafts, footings, foundation beams; plinth beams bases for columns, etc, basement slabs, under-reamed piles and mass concretecomplete all as specified and directed

M & L for reinforced cement concrete (designmix) in M-30 (20mm graded aggregates) for Columns, pillars, piers,posts and struts complete all as specified and directed

M & L for reinforced cement concrete (designmix) in M-30 (20mm graded aggregates) for beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified and directed

M & L for reinforced cement concrete (designmix) in M-30 (20mm graded aggregates) for Chajjas complete all as specified and directed

M & L for reinforced cement concrete (designmix) in M-30 (20mm graded aggregates) for slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed

M & L for reinforced cement concrete (designmix) in M-30 (20mm graded aggregates) for Chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; RCC water tanks upto 1500 litres complete all as specified and directed

M & L for Machine cut kota stone slab flooring 20-25mm thick over and including screed bed or bedding layer 20 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed..

M & L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar etc over and including 10 mm thick bedding layer or backing coat in CM 1:3 laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab including Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed

M & L for Machine cut kota stone slab rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations complete all as specified and directed

M & L for 40mm thick cement concrete 1:2:4, type B-0(using 12.50mm graded aggregates) Damp proof course to horizontal or vertical surfaces including necessary formwork.complete all as specified and directed

M & L for brick work with sub-class ‘B’ bricks old size straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan to any radius in half brick thick wall built in CM 1:4 all as specified.

Returning filling in of excavated any type soil including spreading leveling watering and well ramming in layers n exc 25 cm thick complete all as specified and directed.

M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed:

Removing surplus excavated materials (soil) to a distance exceeding 50 metre but n.exc 250 mtr & depositing where direct at level not exceeding 250 meter above the starting point, including spreading, leveling and compacting complete all as specified and directed

M & L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight, complete all as specified and directed.

M & L for anti- termite treatment for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M & L for anti- termite treatment for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M & L for anti- termite treatment for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M & L for anti- termite treatment for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M & L for anti- termite treatment for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

M & L for rendering 5mm thick on fair faces of brick work or on concrete surfaces of ceiling in CM 1:4 surfaces finish fair and even with using extra cement complete all as specified and directed.

M & L for newly plaster surfaces of ceiling and apply Three coat of white wash complete all as specified and directed.

M & L for rendering 10mm thick cement plaster on other than fair face of brickwork surfaces of wall in CM 1:6 surfaces finish fair and even with using extra cement complete all as specified and directed.

M & L for preparation of new surface of walls and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats over and including a coat of 1mm thick birla wall care putty / POP complete all as specified and directed

M & L for rendering 15mm thick on fair faces of brick work or on concrete surfaces of wall in CM 1:4 surfaces finish fair and even without using extra cement complete all as specified and directed.

supply only Integral waterproofing compound complete all as specified and directed.

M & L for preparation of newly prepaired surface of wall and applying two coat of cement base paint over a coat of primer of same make on walls complete all as specified and directed.

M & L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc. complete all as specified and directed

M & L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floor finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M & L for 3mm thick and 38 mm Width of Glass dividing strips, complete all as specified and directed.

M & L for coloured vitrified tiles of size 600x600x8-10mm thick as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the suraface over and including screed bed or bedding layer 15mm thick in CM 1:4 complete all as specified and directed.

M & L for coloured vitrified tiles of size 600x600x8-10mm thick in vertical surfaces such as dado/skirting with and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed

S & F in Stainless steel fancy type curtain rod 25 mm dia including bracket/wall to wall and latto on each end complete all as specified and directed.

S & F in PVC (SWR) Pipes 110 mm bore single socketed in any length with rubber ring joints , fixed on walls including clump and bolts & nuts and securing ends of stays to wall complete all as specified and directed.

S & F in PVC (SWR) Pipes 110 mm bore single socketed in any length in trenches or in floors complete all as specified and directed.

S & F in PVC (SWR) Pipes 75 mm bore single socketed in any length with rubber ring joints , fixed on walls including clump and bolts & nuts and securing ends of stays to wall complete all as specified and directed.

S & F in PVC (SWR) Pipes 75 mm bore single socketed in any length in trenches or in floors complete all as specified and directed.

S & F in PVC (SWR) bends any radius 110mm size complete all as specified and directed.

S & F in PVC (SWR) bends any radius 75 mm size complete all as specified and directed.

S & F in PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed.

S & F in PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 75 mm dia with access door complete all as specified and directed.

S & F in PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

S & F in PVC (SWR) vent cowl 75mm bore complete all as specified and directed.

S & F in 75 mm dia Nahani trap with grating including jointing to waste pipe fixed in cement concrete complete all as specified and directed.

S & F in vitreous china wash hand basin white flat back size 550x400mm incl 02 Nos angle iron bracket 40x40x5mm bracket CP waste coupling, complete all as specified and directed.

S & F in vitreous china wash down water closet (pedestal pattern/EWC) pan white with “P” or “S” trap including connection to drain or outgoing and to syphonage pipe complete all as specified and directed

S & F in plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hanging device complete all as specified and directed.

S & F in 10 ltrs capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve, float and handle including brackets complete all as specified and directed

S & F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

S & F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

M & L for cutting and chaseing in brick wall for concealed GI tubing and making good in CM 1:4 n.exc 10 cm in girth complete all as specified and directed

S & F in 15mm bore PVC connection 450mm long with PTMT nuts and washer as directed.

S & F in CP bib taps 15mm fancy type Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified.

S & F in Angle valve cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete as specified.

S&F CP fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks & fly nuts for iron pipe of 15mm bore fancy type.

S & F in Two way cock/Two way Angle cock with wall flange matt chrome finish complete all as specified and directed.

S & F in hand shower (Health facut) with 1 Mtr flexible tube with wall hook bracket etc, complete set of superior quality complete all as specified and directed.

S & F in Toilet paper holder, C P box type complete all as specified and directed.

S & F in Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe all as specified

S & F in C P Towel ring fixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and directed.

S & F in Tubular Towel Rail 20mm dia. 'D' type, 600mm long of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats.

S & F in sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long complete all as specified and directed.

S & F in glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets all as specified and directed by Engineer-in-charge.

S & F in repair Soap dish CP any size complete all as specified and directed..

S & F in PVC Grating doom 125 mm dia with waste hole complete all as specified and directed.

S and F in repair Hard/Rigid PVC waste Pipe with socket, 32 mm bore for WHB complete all as specified and directed.

M & L for joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over and including screed bed or bedding layer 15mm thick in CM 1:4 complete all as specified and directed.

M & L for joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surfaces such as dado/skirting with and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed

S & F for rotational moulded triple layered polyethylene water storage tank cylindrical, hoisted & fixed in position all as specified capacity 1000 ltrs complete all as specified and directed.

S & F in 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed.

S & F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube fixed with 75mm long MS screws with PVC fasteners to wallcomplete all as specified and directed.

S & F factory made solid PVC moulded door shutter, 30mm thick (Stiles), consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stilesand plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section & fixed in positions of size 150mm, complete all as specified.

S&F aluminium handles extruded type of size 150mm, complete all as specified and directed.

S&F butt hinges medium weight cold rolled mile steel of size 125mm

S&F Vitreous China Urinal, Half stall type, light coloured of size 610x420x395mm (minimum) flate back type with grating union for discharge pipe brass, chromium plated spreader water discharge with brass CP connection with nut for 15mmdia GI pipe, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe ,complete all as specified .

M & L for 150 mm dia SGSW pipes including excavation in any type of soil excavation in ordinary soil at average depth of 1.5 M including pipes laid on PCC bed, including packing under and haunching against sides Includes all items and activities to execute and make sewer line functional complete all as specified and directed

M & L for Septic tanks including excavation in any type of soil foundation in PCC 1:4:8 below foundation , brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete for 25 users complete all as specified and directed

M & L for Soakage wells excavation in ordinary Soil Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick walls of honey combed masonry with top ring of M25 concrete Brick work in CM 1:6 , RCC cover slab in M-25 Filling with brick bats, complete of size 3.0 M dia X 3.0 M deep complete all as specified and directed

M & L for Cement concrete work in pavement / hard - standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and directed

M & L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing com?pound, Grade ‘A’ (thickness of slab100mm) complete all as specified and directed

S & F in framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M & L for preparation of new or previously untreated surface of steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M & L for Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. in?cluding cleats, brackets, etc complete conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F factory made UPVC white colour Slinding Window three track made of extruded profiles with wall thickness of 2.3mm (±0.2mm), Window profile with hollow section with multi chamber, frame (110mm X 52mm), sliding sash (42mm X 67mm), Sliding mesh sash (20x50mm), sliding interlock (one vertical length in each shutter) (45.5mm X 28mm), glazing bead (24.5mm X 16mm) will be mitered, cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket 1.2 ± 0.2mm thick galvanised steel frame (30mm x 18mm) 2 Nos, sliding sash (30mm X 18mm) 2 Nos, sliding mesh sash (26mm X 10mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Haradware (tough lock of zinc alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of apaerture 1.40mm and required accessories 5.5mm thick glazing with ordinery glass and gauge as requiredat site. Note : (A) Area not exe 2.00 sqm each . (B) The unit rate quoted by contractor includes cost of glass and all other connected accessories.

S & F of 12 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed.

M & L for provn of roof treatment with polymeric water proofing membrane all as given below:- (a) M & L for plastering 10mm in CM 1:3 using 100% course sand on roof including WPC @ 3% by weight of cement. (b) Applying a coat of bituminous primer conforming to IS: 3384-1986 @ 0.25 Iit/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M & L for applying two coats of aluminium paint on membrane @ 0.10 Kg/Sqm (each coat) complete all as specified and directed.

Material and labour for one light point controlled by one 10 amps switch one way point wiring and incl circuit wiring with 1.5 sqmm, PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990(as amended) unsheathed, multistranded, single core, copper conductor cable 1100 volts grade using approved colour coding drawn through and including PVC concealed conduit 20/25 mm dia medium grade (MMS) and incliding all accessories such as bend,tee,elbows,reducers,bell mouth tube ends,short pieces & junction boxes with PVC covers etc in walls / roofs / floors / ceiling etc and including cutting, chasing work at any height with flush mounting GI sunken boxes having top,bottom,side/back side knockout for conduit entry from any direction made out of 1.60mm thick, 60mm deep for housing modular switches,sockets,fan regulators, Indicators,blank plate etc and incl Providing modular white cover plate with inner frame suitable as per switch modules and including PVC insulated multistranded copper conductor 1.5 sqmm FRLSH type unsheathed (Green colour),single core cable as earth wire connecting to common earth dolly for further connection to ceiling rose and earth terminal and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed for the following:- (Note:- All necessary accessories such as modular box,top cover plate,inner frame, blank plate,GI sunken boxes,screws,washers and all modular electrical fixtures are used same make/brand only)

All as per item No- 104 above, but one fan point controlled by one switch 10 amps, and one regulator.

All as per item No- 104 above, but one exhaust fan point controlled by one switch 10 amps one way.

All as per item No- 104 above, but one 5 pin 10 amps socket point controlled by one 10 amps switch on independent board .

All as per item No- 104 above, but one 5 pin 10 amps socket point controlled by one 10 amps switch on same board .

All as per item No-107 & 108 above,but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all for the one 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board.as specified and directed.

All as per item No-107 & 108 above,but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all for the one 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on same board.

Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, with small indicator ISI Marked complete all as specified and directed.

Supply & fixing modular type switch 16/20 Amps, single pole,1way,1 module,240V,with small indicator,AC, ISI Marked complete all as specified and directed.

Supply & fixing modular type socket shuttered type 10 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.

Supply & fixing modular type socket 16 A/20 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed

Supply & fixing modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 1 to 8 steps, ISI Marked complete all as specified and directed.

Supply & fixing red color lighting indication lamp 6 Amps, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed.

Supply & fix angle lamp holder, insulated body with back plate for batten fittings complete all as specified and directed.

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed

Supply & fixing LED decorative box type 20 watt 4 feet fitting bright linea white lighting, high quality materials and designed end caps,extruded aluminium housing enhances safety,high quality PC diffuser, reliable and robust housing structure ,maximize the endurance over the life time slim integrated design , easy to install, efficency 125 lm/w and including providing coloured end caps, pre-wired, and PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose complete all as specified and directed. Make :-Crompton/Havells/Philips

Supply and fixing 20 watt LED batten nicolaus glamtube integrated design, easy to install,efficency,125 lm/w,PC diffuser and robust housing, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.Make :- Havells ordering code.LHEWAJPGPV1B020 or equivalent make in Crompton/Philips

Supply and fixing 36 watts LED supernova light fitting high wattage complete LED lighting with high lumen output,environmental friendly,energy efficient, integrated design, easy to install,PC diffuser and robust housing, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal complete all as specified and directed.Make :- Havells ordering code.LHEWAJPGPV1C036 or equivalent make in Crompton/Philips

Supply & fixing decorative LED inverter type 20 watt,4 feet batten light fitting white lighting, with square profile and polycarbonate channel,Lithium lon battery with charging time 8 hours-10 hours and back up time upto 4 hours high quality materials and design,extruded aluminium housing enhances safety,high quality PC diffuser, easy to install, efficency 125 lm/w and including providing pre-wired, and PVC/Wooden round or square blocks -02 Nos and connected with LED fitting to ceiling rose complete all as specified and directed. Make :- Havells ordering code.LHEXACP7FN1W020 or equivalent make in Crompton/Philips

Supply and fix in repair recess mounting 2'x2' LED 40 Watt light fitting slimmest 9 mm thin in class LED ceiling panel with best in class aesthetick white powder coated frame blended seamlessly with ceiling layout suitable for 600X600mm mudular ceiling grid and also can be suspended with provided kit and including connecting up with ceiling rose to fitting complete all as specified and directed complete all as specified and directed. Make :-Crompton/Havells/Philips

Supply and fix LED secruity light fitting of capacity 40 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Crompton cat ref No.LSTS-40-CDL-M or equivalent make in Havells / Philips as approved

S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired of luminaires including LED light driver and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. Make :-Havells Cat No. LHFHDPE1TN1K020 or equivalent make in Crompton/Philips

Supply and fixed LED floof light light fitting of capacity 100 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5/10 KV inbuilt surge protector and cable connection from looping box to light fitting and testing complete all as specified and directed.Make:-Havells Cat NO.LHEECNP7PB7J100 or equivalent in approved make

M & L for sub main wiring complete with 2 run of 4 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit concealed ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4.0 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4.0 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

Supply & fix sheet metal enclosure with acrylic type DD 415 volts AC,TPN,DB, 4way, flush mounting with 100amps copper busbar, 2 neutral/earth bar and MCB incomer,MCB TPN/FP, and MCB SP as outgoing and complete for IP 43 DBs protection complete all as specified and as directed. Make:Legrand/Hager or equivalent as approved.

Supply & fixing and sheet metal enclosure, with acrylic door type, double door, 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed. Make:-Legrand Cat No.5076 21 8 way or equivalent make in ABB/Havells

Supply and fix suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C 'series, 230 Volts,50Hz suitable for AC's/Geysers complete all as specified and directed.Make:- Legrand / Hager/ Havells or as equivalent approved make

Supply & fix MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply & fix and MCB TPN 40-63 Amps 10 KA,"C" series,AC,440Volts,50Hz, ISI marked and complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Taking down old unserviceable ceiling fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fixing 230 V, 1200mm sweep brushless direct current smart and decorative type ceiling fan complete with three blades, down rods, smart electronic regulator, smart remote control operating unit,LED down lights,metalic finish, dust resistant and connected accessories, . Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current copper winding motor, colour as per requirement at site incl writing MES No on ceiling fan with synthetic enamel paint complete all as specified and directed.Make:-Atomberg ( Renesa ) or equivalent in Havells/Orient as approved make

Supply and fix new Air circulators of size 500mm sweep,metal body, wall mounted type, 230Volts, single phase, oscillating type, Hi-speed,low noise with blades and outer cover and including providing hanging hook and connected items incl writing MES No on wall fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.Make:-Almonard/ Havells/Usha/Crompton/Polar

Supply and fix wall fan 230Volts, single phase, oscillating type, 450 mm sweep, Hi-speed,low noise,heavy duty with blades and outer cover and including providing hanging hook and connected items incl writing MES No on wall fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.Make:-Almonard/ Havells/Usha/Crompton/Polar

Supply anf fixing exhaust fan made of sturd engineering plastic PVC body complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 250 mm and including providing insect protection PVC net frame , with louvers with frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.Make:-Atomberg/Havells/Crompton or as approved make

Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.

Supply and fix GI bracket pipe of size 32 mm dia medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirement with hot or cold bending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including providing suitable fabricate galvanised flat iron clamps of 30X6 mm thick -02 Nos suitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc complete all as specified and directed.Make of GI pipe:- Jinadal/Tata/Surya Prakash

Material and labour for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.ISI Marked IS-15801 lying in trenches/wallc/ceilings or in floors and necessary clamps, saddles etc complete of size outer dia 25 mm complete all as specified and directed.

Supply and fixing PPR gate valve(Brass insert) of dia 25 mm fixing at near to building on wall upto one meter height complete all as spfd and directed.

Making connections of PPR pipes distribution branches with PPR main of following sizes of 50 to75 mm by providing and fixing tee including cutting and making fusion joint etc

Supply and fixing, install, new wall split unit indoor/outdoor of capacity 1.5 TR complete with cordless remote control unit with suitable batteries and remote holder and complete indoor and outdoor units and standard accessories i.e necessary copper tube as per site requirement, Heavy duty MS stand for out door unit,indoor unit plug top,holefastners,necessary suitable three core PVC sheathed copper conductor for inter connections indoor and out door units, drain pipe from indoor unit to outside bldg with minimum 5 star rating complete all as specified and directed.Make:-Daikin/Carrier/Hitachi/O-Genaral or any approved make.

Taking down and disconnected old unserviceable voltage stabilizer complete from existing bldgs/location without any damages and further deposited in MES store yard for safe custody Supply and fix new Voltage stabilizer for automatic operation,single phase,digital display type, naturally air cooled indoor type & designed for input variation between 130 volts to 280 volts with out voltage stabilized at 20 volts with accuracy of± 2.5% and of capacity 5.0 KVA complete all as specified and directed.

Material and labour for submain wiring along with earth wire using 2 X 4.0 sq mm(colour coading) + 1X4.0 sq mm earth wire(green colour) of single core PVC insulated multistranded copper conductor 1100 Volts grade FRLS type in and including PVC casing caping of size not less than 25 mm dia (ISI Marked) with all accessories such as bend ,junction boxes, short pieces of suitable size complete all as specified Note:- Two run of 4.0 sq mm cable and one run of 4.0 sq mm cable and one run of PVC casing caping will be measured as one unit.

Supplying and laying of CPVC/UPVC pipes SDR 11 & Plain SDR 11 incl all fittings of outer dia 32 mm on walls with GI clamps complete all as specified.

Supply, laying & testing PVC insulated armoured, heavy duty electric cable with stranded aluminium conductor,1100 volts of cross sectional area 25 sqmm,4 core including testing,necessary gland,lugs,thimbles,nut,bolt and washers complete all as specified and directed.Make:-Havells/polycab/Anchor

Supply, laying & testing PVC insulated armoured, heavy duty electric cable with stranded aluminium conductor,1100 volts of cross sectional area 6 sqmm,2 core including testing complete all as specified and directed.Make:-Havells/polycab/Anchor

Supply and fixing on load change over switch of 415 Volts,4 Pole,100 Amps in sheet steel metal enclosures and including providing necessary fixing arrangements such as nuts, bolts and washers complete all as specified and directed.Make:- Havells/Standard/Legrand/HPL

Supply and laying bricks burnt clay bricks sub class 'B' for cable of size 250 x 115 x 75mm for protection under ground cable complete all as specified and directed

Material & labour for GI pipe 50 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed .Make: Tata/Swastik/Jindal

Supply and providing river sand for cushioning with dry clean sand 15 cm below cable and 8 cm above the under ground cables and necessary fillings in the trenches and punning to provide required cover complete all as specified and directed.

ABC CONSTRUCTION COMPANY

M/s Ats Electricals

DHABALESWAR ENGINEERING WORKS

M/s MAA BHAIRABI ENTERPRISES

M/S JAGANNATH SASMAL

HARAGOURI SUPPLIERS

V.Venkata Ramaiah