Construction of kailash view point

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil

Earthwork in excavation by mechanical means (Hydraulic excavator)over areas(exceeding 30cm in depth,1.5m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto1.5m, as directed by Engineer-in-charge.

Dumping of stone including cost of stones in horizontal on level.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in M-7.5 (1:4:8) grade, with 40mm nominal size of stone aggregates). Crushed

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mmthick with 20mm nominal size stone aggregate. Crushed

Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 gradedstone aggregate 40 mm nominal size derived from natural sources)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement of R.C.C work in plinth band incl. straightening, cutting, bending, placing in position and binding all complete. TMT bars

Centring and shuttermg including strutting, propping etc. and removal of form for· a) Foundations: footings, bases of columns etc. for mass concrete.

b) Lintels, beams, plinth beams, girders, bressumers and centilevers.

c) Suspended floors, roofs, landings, balconies and access platform.

d) Columns, Pillars, Piers, Abutments, Posts and Struts

e)Providing and fixing upto floor five level precase cement concrete solid block including hoisting and setting in position with cement mortar 1:3 (1 cement:3 coarse sand) cost of required centering and shuttering complete 1:3:6 ( 1cement: 3 coarse sand:6 graded stone agg) 20 mm nominal size crushed

Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with 2nd class kail wood

French spirit polishing with Two or more coats on new works including a coat of wood filler

15mm cement plaster1:3(1cement:3coarsesand)finishedwithafloatingcoat of neat cement on the rough side of single or half brick wall.

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/1Osqm

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. second class kail wood 35mm thick

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, 5.5 MM thick

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixingProviding and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

SANITARY ITEMS : Providing and placing on terrace (at all floor levels) polyethylene Puff water storage tank with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sitex, Electroplast, Star, Lotus or equivalent having valid lSI license. Including puffing,insulation, rockwool, nitrile, of tank and insulating of outlet up-to 15 meters. Complete job.

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing CP Jali of approved make.

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets cutting and making good the walls wherever require :, White Vitreous China wash basin size 630x450 mm with single 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing brass bib cock of approved quality. 20 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931:15 mm nominal bore

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete : Flexible pipe 32mm

Providing and fixing un-plasticized PVC connection pipe with brass unions. 45 cm length 20 mm nominal bore

Providing and fixing CP brass toilet paper holder having (ISI marked)

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms.

Providing and fixing mirror of superior glass (of approved quality) and of requiredshape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing Circular shape 450mm dia.

Providing and fixing S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 75 mm dia complete job. (a) 75mm dia. Or 3"

S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: (b)100 mm dia

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SOR 7.4 UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings 1/C fixing the pipe with clamps at 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (concealed work incl. cutting chases and making good the walls etc. (a) Pn-16 pipe, 40mm 0D 1.5"

(b) Pn-16 pipe, 25mm 0D 1"

Providing and fixing insulation work on PPR pipe by using nitrile tube taping with cello tape, Rock wool 6inch, wire mesh, polythene, taping with cello tape, aluminium sheet 26 guage cladding with dia complete job including carriage 40mm (External pipe)

Providing and fixing insulation work on PPR pipe by using thermocol flex/K flex and taping over pipe complete job 25mm (Internal pipe)

Providing and fixing heat tape 33watts made of denforced or chromolex or eq. make as approved, complete job

Providing and fixing Thermostat Automatic Timer all complete job

Providing and fixing ball valve (brass) of approved quality complete : High or low pressure with plastic floats: 25 mm nominal bore

Providing and fixing water heating geyser of capacity 25 liter of approved make.

ELECTRICAL WORK: Supplying and fixing following modular type switch/socket on the existing switch box cover including connections etc. required 5/6 A switch

3 pin 5/6 socket outlet

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing3pín 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 &15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.(But without MCB/RCCB/Isolator) 8 way(4+24) Double Door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA,"C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 6/16 amp.

Supply and fixing of following sizes of PVC conduit alongwith accessories in surface/recessed including cutting the wall and making good the same in case of recessed conduit as required. 25mm

Supplying and laying 25 mmX 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mmX 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supplying and fixing MCCB IN cubical panel board providing and fixing following rating and breaking capacity MCCB FP in existing cubical panel board including drilling of holes in cubical panel and making connections etc. As required( Make as per annexure enclosed).

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 53. 2x2.5 Sq.mm +1 x2.5 Sq.mm earth wire.

2 x16 sgmm + 1x 10 Sq. mm earth wire

2 x10 Sq.mm + 1x 6 Sq.mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/PVC conduit as required. 56. 1x 1.5 sq.mm

MCCB FP 250 Amp 36 KA

Sypplying & fixing LED type down lighter 15 watt LD- 95- 141-xxx-65 G1 wipro or equivalent.

Supply and drawing co-axial TV cable RG- grade 0.7mm solid copper conductor PE insulated shielded with fine tinned copper braid and protected with PVC sheath in the existing surface /recessed steel/PVC conduit as reqd.

Providing and fixing Fan Box

Providing and fixing Conceal Box

providing and Supplying of POWER HUB AK9000-7000 Watts OR 7KW Powered Self Start Generator With Heavy Duty Engine|Home & Commercial Use High Durability Petrol Generator.

Providing of EGON 2 HP (1.1 kW) JUMBO Self Priming Monoblock Pump | Single Phase Pure Copper Winding | Head 10-36 m, Max Flow Rate: 60 LPM, 2800 RPM, 25 x 25 mm Pipe Size, 9m Suction.

Steel work inbuilt up tubular (round, squareor rectangular hollow tubes etc.) trusses etc., including Hot finished welded type tubes including priming coat complete.

Carriage of materials by mechanical transport Cement and steel from avg lead of 200 kms by MT

Sand from avg lead of 60.0kms

Stone aggregate from avg lead of 60kms

Stone from avg lead of 60.0kms

Carriage of Cement for avg 50 MTR BY HEAD LOAD

Carriage of Sand for avg 50 MTR BY HEAD LOAD

Carriage of Bajari for avg 50 MTR BY HEAD LOAD

Carriage of Stone for avg 50 MTR BY HEAD LOAD

Please Enable Macros to View BoQ information