Providing and fixing of Low height park lights and Mini High mast light in ward 33 under limit of Municipal Corporation Gurugram.

Amount

Providing and fixing of Low height park lights and Mini High mast light in ward 33 under limit of Municipal Corporation Gurugram.

Casting and Laying of making of foundation 1:1.5:3 for foundation of size 0.4 m x 0.4 m x 1 m minimum 4 nos. 12 mm dia longitudinal MS reinforcement rods with rings of 4 nos 8 mm dia for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work

Supply and erection of Decorative Mini High Mast Fixture Brix 400 watt IP-65, Total height of the GI pole is 9 meter lower part of the pole is having 140 mm dia with 4.3 mm thickness height 3meter. Base plate having 400*400*20mm thick elliptical shape service window having loop in loop our 4way connector 40 amp suitable for 10Sqmm wire with 6amp single pole MCB, middle part of the pole having 114mm dia with 4mm thickness height 3 meter. top part of the pole having 90mm dia with 3.7mm thickness height 3 meter. At the bottom of pole there is a cast iron base having dia 260mm and height of base is 220mm. decorative cast iron/aluminum casting are used at the joint of pole. Pole & decorative casting parts are PU panted in three layers coating in which 1st layer with ETCH primer, 2nd layer with EPOXY primer and 3rd final layer with PU paint, light fixture is made of cast aluminum housing having width of 700mm and height of the fixture is 270mm. light fixture is suitable for 350w(As per drawing). LED is mounted on MCPCB with single piece lens on 12 led. T2 lens is used for wide distribution of light fixture is IP65. including Hydra, labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work. Make- Glowmac make model No.GL-A-BRIX-ESTILO, Philips, Crompton, Wipro

Providing trench less cutting by Hydraulic Drilling Device boring/ Manual OR through some suitable alternate method with insertion of HDPE Pipe including supply, Delivery of HDPE pipe at work site and laying of 50mm internal diameter HDPE pipe inside road for road crossing of cable by Hydraulic Drilling Device without opening of the road top surface, laid at a depth of at least 900mm below the road surface from the feeding point to the feeder pillar box in median (OR) from feeder pillar to respective street light pole including cost of all accessories for road crossing for laying of cables.

Casting, Laying and covering of Gap Base plate (Pole) between foundation suitable c.c. mixture and pole marking with yellow reflector stricker with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work

Cost of RCC 1:1.5:3 for foundation of size 700x700x1500mm include base 1200x1200x300 with with minimum 8 nos. 12 mm dia longitudinal MS reinforcement rods with rings of 4nos 8 mm dia manufacturing from special steel along with nuts, washers, anchor plate & template all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work.

Providing trench less boring below existing road / pavement including laying of 65 mm dia GI pipe B class required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work.

Restoring the road cut, in level with the existing road surface, including preparation of subgrade laying and relaying of soiling and laying and consolidation of wearing coats to water bound macadam specification and laying 20mm thick premix carpet, on top including cost of tack and sealcoat complete in all respects.

Supply and erection of 40Watt LED Decorative Post Top Fixture(IP65) made with corrosion resistant Die Cast Aluminium, height of Light Fixture is 425mm with hat of Dia 550mm with die cast base of dia 60mm, rubber gaskets are provided at appropriate location for water resistant(IP65). 4 no of pipe support to Opal Diffuser and canopy Opal Diffuser is made of unbreakable PC material. Led to be mounted on vertical square aluminium exclusion top to bottom height on diffuser. Light fixture is painted with multiple coats of weather resistant Polyurethane paint min. 85 microns including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work. Make Glowmac GL-PT ASTOR or equivalent, Crompton, Philips.

Supply, Erection, testing and commissioning of 3 phase automatic timer AMSON's make on/off the street lights on different fixed timing maintainable on street lights pedestal, pillar, wall M.S pedestal where on\off point is available, cabinet is fabricated from 22 gauge, painting, wiring, connection on/off from bottom of the cabinet, 3 contractor 32 Amp, 24 volts D.C each transformer, rectifier system, switching system, bakelite contractor 32 Amp, MCB 32 Amp L&T digital timer Auto/Manual system, time setter, fibber sheet, rubber and plastic component, wiring and component fitting, chemical (Epoxy) including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work.

Supply and erection of under ground Armoured cable loose in existing pipe or trenches complete with necessary connection. Make RR / Havells / Polycab. 16 Sq. mm 2 Core Cable .

Supply and Erection of Decorative Pole of GI Pipe Section of 3Mtr long with lower section 1Mtr Long -114mm Outer Dia, Upper section 2Mtr long -60mm outer dia. The pole shall be provided with 340mm dia and 45mm height of base arrangement at bottom. The pole shall have service window of size 130mm (W) x 300mm (H) comprising 4 way connectors of 60Amp and 1 MCB of 6Amp including internal wiring in pole with 1.5 mm 2 core PVC insluated copper wire. Diecasted Decorative casting is provided at the joint of Pole. Pole is painted with multiple coats of weather resistant Polyurethane paint having minimum coating thickness 85microns with approved color with all labour & material required including suitable foundation bolts with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work. GL-PL-Flox -MS -03M -60 . Make Glowmac or equivalent, Crompton, Philips,

Bidder Name

Amount

The Swachh Haryana Co op L/c multipurpose Society ltd(GSTN-06AAGAT8251P1ZT)

THE ROHINI COOP L&C SOCIETY LTD.(GSTN-NA)

The Swachh Haryana Co op L/c multipurpose Society ltd

The Swachh Haryana Co op L/c multipurpose Society ltd