CERTAIN REPAIR / REPLACEMENT OF BLDG SECURITY LIGHTS , LIGHTENING CONDUCTORS, DISTRIBUTION BOXES , POINT WIRING AND ELECTRIC FITTINGS AND FIXTURES AT VARIOUS LOCATIONS UNDER AOR OF AGE E/M UNDER GE 861 EWS.

Amount

S&F in repair earth continuity conductor and main earthing lead fixed to wall on batten or recess or chases or buried in the ground or drawn in conduit /pipe or fixed to pole having size 32X6mm GI strip all as specified and directed by Engr-in- Charge.

S&F in replacement of Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground, all as specified and directed by Engr-in- Charge.

Supply & fixing in replacement of Air termination, single pointed aluminium rod 12mm dia and 300mm long, including necessary fittings and fixtures, complete all as directed by Engr-in-charge.

M&L in replacement of Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw , complete all as directed by Engr-in-charge.

Supply & install in replacement of environmental friendly, ultra modern, energy saving bulk head 8W in die cast aluminium housing & frosted glass complete all as specified and directed. Cat Part No LHKL01160099 in Havells or equivalent in Philips/Wipro.

S&F in replacement of LED 40 Watt security light new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IKO7 with 10KV built-in-surge protection device complete all as directed by EIC. Make Havells Cat Part No ENDURAPEARLNEOSL40WLED757PASYTOPC or equivalent/CROMPTON GREAVES/GE.

Taking down carefully aluminum/copper point wiring (light fan socket or power) complete with fitting such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCB'S, Main switch from control board and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified keeping aside regulators/ light fitting/ MCBs serviceable/ unserviceable items for reuse with in the same bldg or deposited to MES store yard

Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including PVC casing and capping/Conduit medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size or PVC Gang Box all as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

All as per srl item No-8 here in above but for one 3 pin 5A socket outlet independent controlled by one switch.

All as per srl item No-8 here in above but for one 5A socket outlet on the same board controlled by one switch.

All as per srl item No-8 here in above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead.

M&L in replacement of sub main wiring with two single core PVC insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in & including concealed PVC casing capping medium grade 2mm thickness ISI marked or cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification incl taking down old unsv complete all as required at site or directed by Engr-in- charge.

M&L in replacement of sub main wiring with two single core PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including concealed PVC casing capping medium grade 2mm thickness ISI marked or cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification incl taking down old unsv complete all as required at site or directed by Engr-in- charge.

M&L for Switch piano flush button single pole one way 5 amps 240 volts, complete all as required at site or directed by Engr-in- charge.

M&L for Switch Socket combination, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts, complete all as required at site or directed by Engr-in- charge.

M&L for Switch Socket combination 2 in 1, 5 Amps flush type, 230 volts, complete all as required at site or directed by Engr-in- charge.

Supply and fixing Socket outlet 2 in 1, 5 Amps 5 pin flush type, 230 volts .

Supply and fixing Socket outlet 6 pin 5/15 amps flush type, 230 volts.

Supply & fixing in repair ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge.

S&F bell push flush type 6 Amps 240 Volt, complete all as required at site or directed by Engr-in- charge.

S&F bell/buzzer multi music type AC 230 volts single pole, complete all as required at site or directed by Engr-in- charge.

Supply and fixing in replacement fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required at site or directed by engineer-in-charge.

S & F Lamp holder angular/straight insulated body with back plate for batten fittings.

Supply and fixing in repair Plug top 3 pin 5 amps 230 volts.

Supply and fixing in repair Plug top 3 pin 15 amps 230 volts.

Supply and fixing in repair Wall mounted LED Batten, extruded Aluminium heat sink provided for efficient heat dissipation & integrated electronic driver of Lamp type: 18W LED life time of 30000* hours including lamp all as specified and as directed. Make: Philips, Cat Part No: TMC 501 p 1 X T-LED 22W P3241 & ESSENTIAL LED TUBE 1200 MM 18W865 T8 AP 1 (for Tube rod) or equivalent in Havells cat part No ENDURA LINEARNE OBS 20W LED 830SPC WH OR C&S CAT PART NO TARA-E 120W LTDC122 20W LED/WD

Taking down old Unserviceable Bldg Sec light fitting and taken as credit including supply & Fix 25 W New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaries with high power LED as light source along with suitable bracket incl all accessories all as specified and directed by Engr-in-charge. Make: Havells, Cat Part No: ENDURAPEARLSL25WLED 757SASYTOPC or equivalent in PHILIPS CAT PART NO BRP042 LED 19 CW MR SI PSU GR OR C&S CAT PART NO DRACO/25W LTESS25WLED

Supply, Installation, testing and commissioning in repair of Recess luminary with minimum 70 % lumen maintenance, CRI should be greater than 80, Housing should made of CRCA with opal diffuser. Electronic Driver should be in-built , power factor >0.9 with THD <10%. System consumption should be between 28- 36W. Similar to Philips Cat No : RC380B LED 30S -4000 G4 L60 W60 PSU OD OC or Havells cat part No PLUTONE 02X2 PLR 28W LED 84OS or C&S cat part No CYGNUS/36W/W - LTCRSLM36WATT 2X2 OR CROMPTON CAT PART NO LPL2-36-CDLL 2X2

Supply and fix in repair Wall mounted Endural LED Batten, high efficacy - 1051m/W, Short circuit & Voltage cut off protection, wide operating voltage range of 140V to 270V wide, lumen output of 4000 , System consumption should be between 36-40W including lamp all as specified and as directed. Make: Philips, Cat Part No: BN 308C LED 40S-6500 L120 PSU WH or equivalent in Havells Cat Part No- STOUTPIUS1200BS40W LED 857 SPC WH or Crompton Cat Part No-LCBI-40-TL

Supply, Installation, testing and commissioning in repair of Surface mounted LED luminary with full glow designed luminary > 30% energy saving, maintenance free, CRI 80, System consumption should be between 28- 36W complete all as specified and directed. The type shall be of 2'x2'.PHILIPS CAT. No. SM 365C LED 32-6500 PSU OD GR or Havells Cat Part No PLUTO SURFACE 2X2 PLS34W LED 84 OS or C&S CAT PART NO . CYGNUS-CS/36W/2X2/W-LTCSP36W LED 2X2

Supply and fix in repair sheet metal enclosure MCB distribution board, SPN, double door with IP-43 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link make Hager/Merlin Gerin multi-9/Standard/Havells/Legrand fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification.

Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

S&F in repair MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,415 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 3 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory all as specified and directed.

Supply and fix in repair MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,415 Volts 8 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 3 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory all as specified and directed.

M&L in repair for MCB single pole 240 volts 6 to 32 amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), biconnect upper and lower terminals , integrated label holder to ensure circuit identification.

M&L in repair for MCB single pole and neutral 240 volts 6 to 32 amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), biconnect upper and lower terminals , integrated label holder to ensure circuit identification.

M&L in repair for MCB single pole and neutral 240 volts 40 to 63 amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), biconnect upper and lower terminals , integrated label holder to ensure circuit identification.

Supply & Fix in repair MCB TPN 415 volts, 40 amps 'C' Curve 10 kA Capacity all as directed. .

Supply and fix in repair MCCB TPN , 415 Volt, 100 Amps,25 KA , adjustable thermal & fixed magnetic setting complete all as specified and directed.

Supply and fix in repair MCCB TPN , 415 Volt, 125 Amps,25 KA , adjustable thermal & fixed magnetic setting complete all as specified and directed.

Supply and fix in repair MCCB TPN , 415 Volt, 160 Amps,25 KA , adjustable thermal & fixed magnetic setting complete all as specified and directed.

Taking down carefully geyser 25/35/50 littrs capacity from wall after unscrewing nuts/bolts etc. and again refixing in position after repair and replacement of necessary spare parts including testing complete all as specified and directed by Engr-in-Charge. Note:- (spare parts shall be measured and paid for separately under respective items as supply only)

Supply only heating element AC 230 Volt of rating 1500W ISI mark as per existing any type complete all as specified and directed by Engr-in-Charge

Supply only thermostat switch AC 230 Volt adjustable range from 0-90 degree Celsius complete all as specified and directed by Engr-in-Charge

Supply only flexible PVC connection pipe heavy duty suitable for hot water to bear the temp of 100 degree centigrade with outlet and inlet connection brass adopters , washers of size 450 mm long 15 mm dia bore complete all as specified and directed by Engr-in-Charge

Removing the Geysers from building & depositing to MES Store yard , Supply and fixing Geyser of 35 Ltrs capacity 5 star rating including nuts, bolts connection pipe and gaskets etc, and fixing in same position and testing all as specified and directed. Note :- ( Old unsv geyser will be deposited at MES Store yard).

Supply and fixing of LED 7 watt pin type bulb complete all as specified and directed by Engr-in-Charge. Make-Havells/Philips/Bajaj

Supply and fixing in repair Automatic source change over with current limiter 30/20A ACCL complete all as specified and directed by Engr-in-Charge. Make Havells Cat Part No DHABOSN3020 OR Equivalent in Indoasian/L&T

Supply and fixing in repair Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 63Amps.

Supply and fixing in repair Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 100 Amps.

Supply and fixing in repair Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 200 Amps .

Dismantling the old unserviceable main switch and taken as credit including supply and fix new Double break Switch fuse Unit with 03 Nos HBC fuses conforms to IS/IEC 60947-1&3 metal clad Triple pole and neutral link, 415 volt 100 Amps HRC type all as directed.

Supply and fixing Fluorescent tube rod 4' long suitable for 1x36 Watt FTl fitting complete all as specified and directed by Engr-in-Charge.

Supply and fixing in Replacement of domestic use electronic ballast suitable for 1x36/40 Watt FTL all as directed by Engr-in-Charge.

Supply and fixing in Replacement of domestic use electronic ballast suitable for 1x36/40 Watt FTL all as directed by Engr-in-Charge.

Supply and laying in repair 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed twin core 16 sq. mm nominal cross section in service connections

Material & labour for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6 mm thick buried directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI strip 32x6mm as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade 40mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shore all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or directed by Engineer-in-charge and incl testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI strip of size 32x6mm with protection pipe of 40mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by 25%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

M/S LATIF AHMAD BABA CONSTRUCTION

M/S AK ENTERPRISES

ACESOLARR RENEWABLE ENERGY LLP

M/S SHAH RAOUF

M/S N A Enterprises