SPL REPAIR TO FLOOR PATH, PLASTERING, PAINTING AND MISC REPAIR IN BLDG NO. 17 AND 54 RECTS LIVING BARRACK AT DRC FAIZABAD.

Amount

Dismantling Mangalore pattern roofing tiles with ceiling tiles or slate roofing complete all as specified and as directed.

Dismantiling Asbestos cement (corrugated, semicorrugated, etc.) sheets including any type of ridges as in roof covering complete all as specified and as directed by Engr-in-Charge.

S&F 0.50mm thick (total coated thickness) Pre-colour coated galvalume/ zinkalume sheets as in roof , wall cladding, north light curves, valley gutter, ridge etc, LLoyed deck or equivellent profile having creast depth 28 to 30mm at a pitch of 195 to 250mm and having to ribs in between for additional strength fixed with zinc coated shelf drilling fastner including EPDM washer complete laid with on corrugation side lap and main 150mm end laps laid to stop all as per manufacture /profile maker instruction complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/blankets, any thickness and any type including cover fillets and existing grid all as specified and as directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed by Engr-in-Charge.

M&L Fe 410-W (Gde E-250 quality A) for Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed by Engr-in-Charge.

M&L 4mm thick Asbestos cement plain building boards, fixed to framework with nails or screws of any size and any type complete all as specified and as directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling of any size and any type including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for light shade double charged vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for light shade double charged vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, as on vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F Joint free non skid Ceramic tiles, coloured, superior quality 7 to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F glazed ceramic tiles, coloured superior quality 300mmX450mmX 6 to 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surface over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L PCC type B0 1:2:4 (12.5mm graded aggregate) 25mm thick as in floor finished surfaces fair and even to receive tile all as specified and as directed by Engr-in-Charge.

M&L screed bed or bedding layer of cement mortar 15mm thick in CM 1:6 for laying floor finishes to receive tiles all as specified and as directed by Engr-in-Charge.

M&L 10mm thick screeding bed on backing of verticles tiles in CM 1:4 all as specified and as directed by Engr-in-Charge.

Demolition of Cement Concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below or above ground level) complete all as specified and as directed by the Engr-in-charge.

M&L PCC 1:4:8 type D-2 ( using 40 mm grade aggregate) 75 mm thick as in sub base all as specified and as directed by Engr-in-Charge.

M&L screed bed or bedding layer of cement mortar 20mm thick in CM 1:3 for laying floor finishes to receive tiles all as specified and as directed by Engr-in-Charge.

M&L machine cut Kota stone slab flooring 20-25mm thick, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engr-in-Charge.

M&L machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar etc laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engr-in-Charge.

Taking up or down steel water tubing of 15mm dia bore and connection incl cleaning for refixing or removal to stores all as specified and as directed by Engr-in-Charge.

Taking up or down steel water tubing of 20mm dia bore and connection incl cleaning for refixing or removal to stores all as specified and as directed by Engr-in-Charge.

Taking up or down steel water tubing of 25mm dia bore and connection incl cleaning for refixing or removal to stores all as specified and as directed by Engr-in-Charge.

Refixing old steel tubing of 15mm dia bore pipe and connectin in new or old positionall as specified and as directed by Engr-in-Charge.

Refixing old steel tubing of 20mm dia bore pipe and connectin in new or old positionall as specified and as directed by Engr-in-Charge.

Refixing old steel tubing of 25mm dia bore pipe and connectin in new or old positionall as specified and as directed by Engr-in-Charge.

S&F 15mm dia bore GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor all as specified and as directed by Engr-in-Charge.

S&F 20mm dia bore GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor all as specified and as directed by Engr-in-Charge.

S&F 25mm dia bore GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed by Engr-in-Charge.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and as directed.

Supply only 10 ltrs capacity PVC valveless, Syphonic action type, flusing cistern, low level, white, with inlet ball valve, float and handle including brackets in repair complete all as specified and as directed.

S&F viterious china wash down water closet pan (pedestal pattern) white (including fixing bolts, flushing cistern and flush pipe) fixed in repairs complete all as specified and as directed.

Supply only coloured plastic water closet seat, black closed pattern with flat bottom and cover and mild steel CP or aluminisied hinging device complete all as specified and as directed.

S&F in repairs Vitreous China Wash Hand Basin white flat back of size 550x400mm excluding pillar tap CP coupling, chain and plug but including brackets and pedestal all as specified and as directed by Engr-in-Charge.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F 15mm bore Pillar taps cast copper ally, with capstain head, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fiixed in repair complete all as specified and as directed.

S&F 15mm Cast copper alloy, Chromium Plated Bib taps fancy type with crutch or butterfly handle, screwed for iron pipe or for brass pipe of for ferrule and fixed in repair complete all as specified and as directed.

S&F 15mm Stop valve, fancy type, chromium plated with long shunk and cup (cncealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed in repair complete all as specified and as directed.

Supply only 32mm dia waste fittings, brass, chromium plated for glazed ware sink, basin etc with long screw shunks and fly nuts, flange end bedded in red lead cement and other end fixed in repair complete all as specified and as directed.

S&F 32mm waste coupling of PTMT minimum weight 45gms in repair complete all as specified and as directed.

S&F PVC connection pipe 15mm size with CP nut of length 450mm complete all as specified and as directed.

S&F Towel Rail 600mm long of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and as directed.

M&L Vitreous China Urinal half stall type, white (including flushing cistern, flush pipe and waste pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe complete in repair all as specified and as directed by Engr-in-Charge.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and as directed

Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and as directed.

Taking down shutter of any description n.exc 1 sqm each complete all as specified and as directed.

Taking down shutter of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and as directed.

S&F plain solid straight chowkats and framed wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints 2nd class hard wood (Sal) complete all as specified and as directed.

S&F 35 mm thick 2nd class Hard wood plain framed panelled shutter (any number of panels) with panels of timber flat on both sides (Feather edge) or of veneered particle board medium density wood particle board with commercial face veneers and fitted to chowkhat complete all as specified and as directed.

S&F 35mm thick 2nd class HW glazed and Skelton shutter open rebated and prepared and to receive glass gauze etc (without sash bar), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing galss etc supplied and fitted to chowkhats complete all as specified and as directed.

S&F 30 mm thick 2nd class HW glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc (without sash bars) as in windows, ventilators etc complete all as specified and as directed.

S&F 30 mm thick 2nd class HW glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers complete all as specified and as directed.

S&F FI as in bands, straps, hold fast, twist clamp , two way or three way strap and similar articles conforming to Fe 310-0 or Fe 410-0 complete all as specified and as directed.

Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labours, articles n exc 200 Cucm each in 2nd class Hard Wood complete all as specified and as directed.

M&L tarring back of chowkats etc are tarred exc 0.1 Sqm but not exc 0.5 sqm each complete all as specified and as directed.

All as per item No 56 herein before but small articles such as hold fast area tared not exc 0.1 Sqm each -ditto-

M&L plain fillets square or rectangular in section area exc 13 but not exc 25 Sqm wrought, bullnosed, splayed, chamfered or rounded on one edge or faced with screws 2nd class hardwood fixed in repair or refixed in old position all as specified and as directed by Engr-in-Charge.

M&L PCC type C1 1:3:6 (20mm graded aggregate) as in bed plate including necessary form work complete all as specified and as directed.

S&F 16mm dia round bar as in window guard bars, plain, let in and fixed independently in wooden frames, L or T Section support for shelves and similars articles conforming to Fe-290 Gde E-165 all as specified and as directed by Engr-in-Charge.

All as per item No 60.00 above but fixing only in repair.

S&F 200mm long mild steel powder coated barrel tower bolt with bright bolts complete all as specified and as directed by Engr-in-Charge.

S&F 150mm long mild steel barrel tower bolt store enamelled with bright bolts complete all as specified and as directed by Engr-in-Charge.

S&F 100mm mild steel butt hinges medium weight , cold rolled complete all as specified and as directed by Engr-in-Charge

S&F 75mm mild steel butt hinges medium weight , cold rolled complete all as specified and as directed by Engr-in-Charge.

S&F MS powder coated handle pressed handle over type black 125 mm size complete all as specified and as directed by Engr-in-Charge .

S&F mild steel powder coated pressed handle oval type stove enameled 100mm size complete all as specified and as directed by Engr-in-Charge.

S&F 300mm Mild steel powder coated sliding door bolts, plate type black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Hacking out old broken glass panes (any thickness size quality or description ) from wooden frame fixed with oil putty or beads area not exc 0.5 Sqm each all as directed.

S&F 3mm thick glass pan ordinary quality and glazing with oil putty in square not exc 0.5 sqm each pane complete all as specified and as directed.

S&F galvanised stainless steel wire cloth 0.56mm normal dia of wire and average width of aperture 1.18mm complete all as specified and as directed.

All as per item 71.00 herein before but in repair.

Taking down cement plaster on Brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces, finishing even and smooth without using extra cement complete all as specified and as directed by the Engr-in-charge

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finishing fair and even complete including using water proofing compound all as specified and as directed by Engr-in-Charge WPC shall be measured & paid for separately.

M&L for rendering in ceiling, chajja and like items, 5 mm thick in CM 1:3 on fair faces of brick work or concrete, surfaces, finishing fair and even complete all as specified and as directed by the Engr-in-charge.

M&L for preparation of newly plastered surfaces of walls and applying three coat of white washing complete all as specified & directed by Engr-in-Charge.

M&L for preparation of newly plastered wall surfaces and applying two coat of cement base paint over a coat of alkali resistant priming over a coat of 1mm thick Birla wall care putty complete all as specified and directed by Engr-in-Charge.

M&L for 3 coat of white washing on newely plastered ceiling surfaces including preparation of surfaces complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over a layer of 1mm thick wall care putty, on plastered surfacee, preparatory to distempepring to obtained smooth finish complete all as specified & directed by Engr-in-Charge.

M&L for preparation of old decorated distempered surfaces and applying one coat of distemper oil emulsion on walls surface over a coat of wall putty as required of approved tint and make all as specified and directed by Engineer in charge

M&L for preparation of old surfaces of walls with washing, rubbing down and stopping of distempered and painted surfaces including brooming down or steel wire brushing, scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coats of white wash complete all as specified and directed.

M&L 2 coats of synthetic enamel painting to wood and wood based material surfaces of any description, not otherwise described over 10cm width or girth over pink primer incl preparation of new surfaces complete all as specified and as directed.

M&L for preparation of old painted wooden /wood based materials surfaces of any description , not otherwise described ,over 10 cm width or girth and painting one coat with synthetic enamel including cleaning, stopping and rubbing down and removing all dropings etcc complete all as specified and as directed.

M&L for preparation of new steel and iron surfaces of any description , not otherwise described ,over 10 cm width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide complete all as speciified and as directed.

M&L for rendering 10mm thick in CM 1:4 on concrete surfaces finishing even and smooth without using extra cement and using water proofing compound all as specified and as directed by Engr-in-Charge WPC shall be measured & paid for separately

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in filling of roof depressions, providing roof slopes or in roof kerbs incl rounding complete all as specified and as directed by Engr-in-Charge.

Dismantling timber scantling 40 sqcm and over in section, in any position as in framed work purline, rafter etc all as specified and as directed.

M&L for 2nd class hardwood clean sawn timber framed and fixed complete all as specified.

All as per item No 92.00 here-in-before but except timber.

M&L for 2nd class hardwood clean sawn timber framed and fixed in repair to replace old and decayed timber (including piecing, scarfing etc, of old and new timbers if reqd) and removing defective portion to store complete all as specified

All as per item No 94.00 here-in-before but except timber.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roases, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators etc for reuse at site or carrying to the stores (To be measured only when found serviceable in all respect complete for reuse complete all as specified and directed.

Taking down MCB DBs including MCBs of any capacity/rating complete all as specified and directed.

Taking down sub main wiring of any description complete all as specified and directed.

M&L point wiring complete for one light /fan point controlled by one, one way switch with PVC insulated unsheathed, FR cable, single core, stranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits( including cutting chasing in brick wall and making good with CM 1:3) and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed, FR cable, single core, stranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

One light point or one fan point controlled by one switch with cable 1.5 Sqmm size complete all as specified and as directed.

One 3pin 5 Amps socket out let point on independent board complete all as specified and as directed.

One switch sockt outlet point 3 pin, 5 Amps on the same board complete all as specified and as directed.

All as per Sl Item No. 99.02 herein before but wiring 2.50 Sqmm cable for 3 pin, 5/15 Amps power point.

Supply and fix switch piano flush type ISI marked on way 5 Amps 240 Volts complete all as specified and as directed.

Supply and fix switch three pin and two pin 6 Amp controlled by one flush type switch ISI marked complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1, suitable for 3 pin 5 Amps /15 Amps flush type (multipurpose) ISI marked complete all as specified and as directed.

S&F ceiling rose PVC polycarbonate isolated body 2 to 3 terminals complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required complete all as specified and directed.

M&L for sub main wiring comprising two single core, 6 Sqmm nominal cross sectional area multi on same copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and over PVC conduits and conduit fittings complete (concealed type) including S&F 4 Sqmm nomial cross sectional area on same copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified (Cutting chases and making good of disturbed surfaces shall deem to be including in the unit rate quoted by tendered.

All as per item No. 105.00 above but two single core, 4 Sqmm nominal cross sectional area neutal and phase and 2.5 Sqmm nominal cross sectional area on same copper.

S&F LED tube light fitting, 1x18 Watt surface and wall mounted LED batten with polycabonate housing & integrated electronic driver and all accessories with 1 No 18 Watt LED tube rod including provn of twin core multi stranded copper cable of size 1.5 Sqmm from ceiling rose to tube light fitting complete all as specified and directed by Engr-in-Charge. Make :- Havells Cat No. BVLHEXAPPIN1W018 or equivalen in specified make.

S&F lamp holder PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

M&L for sheet metal enclosure for MCB DB when MCBs to eb used single pole and neutral double door 8 ways with bus bar 240 volts complete all as specified and directed.

M&L for MCB SPN 40 Amps 240 volts complete all as specified and directed.

M&L for MCB SP 32 Amps 240 volts complete all as specified and directed.

Supply and fixing Exhaust Fans 300mm sweep metal body, 230 volts complete with all connected accessories i.e. fixing nut, bolt, washers, louvers shutter etc. including provn of PVC insulated twested wire 3 core 23/0076 copper conductor flexible PVC insulated wire complete all as specified and directed. Make : Havells/Crompton/Bajaj.

S&F of MCB DB IP 54 protection tripple and neutral 4 ways, sheet metal enclosure (double door) including 01 No MCCB 125 amps rated 25 KA breaking capacity 4 pole, 12 Nos MCBs 32 Amps SP 230 Volts for outgoing circuits including all electric connection with suitable size of lugs and copper wire etc complete all as specified and directed.

Supply and fixing on load change over switch, 63 Amps, 4 pole, 415 Volts, front operated with s/s enclosure complete all as specfied and directed.

Taking down ceiling fan and removing fan blades etc complete all as specified and directed.

Hanging only ceiling fans and connecting up including provn of cable from ceiling rose or connector complete all as specified and directed.

Painting of ceiling fans complete in site with synthetic enamelled paitn by spraying including filling cavities with filler one coat after cleaning all dust etc complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600x6mm thick buried in ground(earth pit not less than 2.25m deep below ground level) with top edge of the earth plate not less than 1.5m below the ground level connected to galvanised iron earth wire 4mm dia (7.50 Meter) by means of nuts,bolts,check nuts and washer of galvanised iron at 2 points & GI pipe 20mm bore light grade for protection of earth wire, PCC chamber 1:3:6 (type C-1)using 20mm graded stone aggregate funnel with wire mesh,50mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced and lifting handle on RCC cover with 8mm MS bars at 150mm centre to centre both ways and charcoal dust and common salt,all as shown in electrical plate No. 3 of MES SSR Part-I and making test point as specified including excavation & earth work and connecting the earthing to an earthing point/equipment incl testing on completion complete all as specified and dirtected. (Note:- The rates quoted shall deemed to be included the cost of earth test point, GI strip and protection pipe upto 7.5m beyond the earth plate electrode.)

M&L for cutting holes in walls for fixing of Exhaust fan etc and making good disturbed portion in CM 1:3 complete all as specified and directed.

Matrubhoomi Construction

K R KAUSHAL AND SONS

MOHAMMAD RIZWAN CONTRACTOR

DK Builders

Saket Traders