Karnataka

Active

Works

Bridges/Culverts

CONSTRUCTION OF FOOT BRIDGE OVER A THODU ON THE ROAD LEADING TO HADDUGODU FROM KANOOR MAIN ROAD NEAR CHIRIYAPANDA NARU SUDHA ROAD AT PONNAMPET TALUK

Public Works Department

PWD Division Office Kodagu | Kodagu, Karnataka

Amount: ₹10.2 LCloses: 28 Aug 2026Due today

Timeline

Published14 Aug 2026
Closes28 Aug 2026

Tender Value

₹10.2 L

EMD Value

₹12,800

Closing Date

28 Aug 2026, 10:30 pmDue today

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Executive engineer

Office Number

08272225645

Work Description

CONSTRUCTION OF FOOT BRIDGE OVER A THODU ON THE ROAD LEADING TO HADDUGODU FROM KANOOR MAIN ROAD NEAR CHIRIYAPANDA NARU SUDHA ROAD AT PONNAMPET TALUK

Tender Information

Tender ID

PWD/2026-27/BR/WORK_INDENT38736

Reference Number

PWD/2026-27/BR/WORK_INDENT38736

Tender Type

Reserved

Product Category

Bridges/Culverts

Form of Contract

Electronic Documents, First(One Cover)

Location

PWD Division Office Kodagu

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredKPWD Class-IV and above Registration Certificate

RequiredAnnual Turnover Certificate issued by Approved Chartered Accountant with UDIN last five years as per KW-1 i.e. 2021-22 , 2022-23, 2023-2024, 2024-25 & 2025-26 Updated to 2026-27 price level.

RequiredTenderers will only be qualified, if their available tender capacity is more than the total tender value. i.e. A x N x 5 - B as per KW-1 Document.

RequiredWork Done Certificate

RequiredThe contractor belonging to Scheduled Castes SC should upload Caste Certificate issued by Competent Authority.

RequiredThe contractor belonging to Scheduled Castes SC shall be domicile of the State of Karnataka for more than 10 years,Should upload Certificate issued by Competent Authority.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidder s end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

Conditional tenders will not be accepted

The tenderer shall bear all costs associated with the preparation and submission of his tender and the employer will in no case be responsible and liable for these costs

The employer reserves the rights to reject one or all Tender without assigning any reasons

The employer is not responsible for any delay in accessing E-Procurement 2.0 Portal

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

As per Government order LD/300/LET/2006 Bangalore dated 1.01.2007 nad Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval

Materials required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work.

Contractor should carryout additional test required to test the suitability of materials.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

All precautions should be taken by the contractor so that there are no damages to such public/ private properties. If any damage is caused, it has to be rectified at his own risk and cost.

Contractor should follow strictly the prevailing rules of labour act.

At the time of agreement, the successfull bidder/contractor should submit proposed methodology and programme of construction backed with equipment and material planning, & deployment duly supported with broad calculation and quality management , plan, proposed to be adopted justifying their capability of execution , completion of the work and cast flow forecasts as per technical specifications and within the stipulated period of completion.

Security deposit for an amount equivalent to 5% of the contract price shall be deducted in every running bill. However, in case of first and final bill the entire security deposit will be deducted from the final bill. and Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer, a additional security deposit for unbalanced tenders for an amount equal to the amount put to tender as per CSR minus quoted amount.

The contractor s assessed available tender capacity will be calculated as prescribed in tender document Attached.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents attached.

Contractors should be registered with KPWD Class IV and above Registration

To qualify for award of this contract, each tenderer should give all details and documents as per K.W-1

Work should be carried out as per K/W-1 STD attached with tender .

The period of completion of this work is 3 Month

GST shall be paid to the tendered amount separately.

The contractor should maintain the work during the defective liability period, i.e. for 1 year after the completion of work at his own cost.

Contractor shall bound to comply the prevailing rules and regulations with regard to the EPF Contribution rules and any modifications thereof before and after execution of agreement

The FSD deducted in RA bills will be refunded only after successful completion of Defect Liability Period

Contractors has to submit their labour EPF details with every Running Bill

The increase in GST shall not be paid in the extended period of contract for which the Contractor alone is responsible for delay as determined by the authority while granting the extension of time.

The contractor belonging to Scheduled castes should upload Caste Certificate issued by Competent Authority.

If the contractor is a firm, then all the partners or members of the firm shall belong to the Scheduled Castes as the case may be

The contractor belonging to Scheduled Castes shall be domicile of the State of Karnataka for more than 10 years-Should upload Certificate issued by Competent Authority.

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹12,800

Important Dates

Last Activity

14 Aug 2026

Published

14 Aug 2026

Download Ends

25 Aug 2026

BOQ Preview

•

CONSTRUCTION OF FOOT BRIDGE OVER A THODU ON THE ROAD LEADING TO HADDUGODU FROM KANOOR MAIN ROAD NEAR CHIRIYAPANDA NARU SUDHA ROAD AT PONNAMPET TALUK

•

Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, inc...

•

Removing all type of Hume Pipes and Stacking including Earthwork and Dismantling of Masonry Works. - Above 600 mm to 900 mm dia ---- With all lead and lift including cost and conveyance of all materi...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Mechanical Means -

•

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all mater...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Tubular Steel Railing on Precast RCC Posts, 1.2 m High Above Ground Level - Providing, fencing and erecting 50 mm dia painted steel pipe railing in 3 rows on precast M20 grade RCC vertical po...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...

•

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. - Boulder Laid ...

•

Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete. On...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-1-38736 SC.doc

Tender Document • 1.93 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].