SPECIAL REPAIRS TO CERTAIN CABINS 35 NOS OF PO16 BUILDING AT WNC O MESS UNDER GE NW NOFRA COLABA MUMBAI

Amount

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.

Material & labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) and finished even & smooth without using extra cement completed all as specified.

Material & labour for rendering 10 mm thick on fair faces of concrete surfaces in ceiling in CM (1:4) and finished even and smooth without using extra cement completed all as specified.

Material & labour for preparing new plastered surfaces of wall, applying one coat of wall care putty not less than 3mm thickness and making the surface even and smooth using emery paper and applying two coats of oil bound distemper over a coat of alkali resistant primer using roller complete all as manufacturers instructions.

Material & labour for preparing new plastered surfaces of ceiling, applying one coat of wall care putty not less than 3mm thickness and making the surface even and smooth using emery paper and applying two coats of oil bound distemper over a coat of alkali resistant primer using roller complete all as manufacturers instructions.

Material & labour for complete removal of existing treatment including washing, rubbing down and stopping of distempered and painted wall surfaces, filling holes and cracks with filling putty, applying one coat of wall care putty not less than 3mm thickness and making the surface even and smooth using emery paper and applying two coats of oil bound distemper over a coat of alkali resistant primer using roller complete all as manufacturers instructions.

Material & labour for complete removal of existing treatment including washing, rubbing down and stopping of distempered and painted ceiling surfaces, filling holes and cracks with filling putty, applying one coat of wall care putty not less than 3mm thickness and making the surface even and smooth using emery paper and applying two coats of oil bound distemper over a coat of alkali resistant primer using roller complete all as manufacturers instructions.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the primesed completed all as specifed and directed Note: The place of disposal shall be find out by the contractor.

Material & labour for dark shade, double charged, ultra charged vitrified ceramic tiles, 10mm thick (square/rectangular) polished area of each tiles exceeding 0.36 but not exceeding 0.42 sqm laid in floors over and including 15mm thick screed bed or bedding layer in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & labour for coloured glazed vitrified tiles light shade 10mm thick (square/rectangular) polished area of each tiles exceeding 0.36 but not exceeding 0.42 sqm as in vertical surfaces such as skirting/dado etc., laid over and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & labour for Non-Skid coloured ceramic tiles 7 to10 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm laid in floors over and including 15mm thick screed bed or bedding layer in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & Labour for coloured glazed ceramic tiles 450mm x 300mm x 7mm thick but laid on vertical surfaces such as skirting/dado laid over and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement paste and pointed in white or coloured cement to match the shade of tile complete all as specified.

Material & labour for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like laid over and including 15mm backing coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding on exposed edges complete all as specified and as directed.

Taking down chowkat with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4 Sqm each.

Taking down aluminium windows with shutters of any description exc 2 sqm each.

Material & labour for second class hardwood (SAL) plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

Supply & fixing40mm thick flush shutters, solid core construction, with block board core and both faces covered with decorative face veeners with lipping / frame to match complete all as specified and directed.

Material & labour for 6mm thick Veneered decorative plywood (ISI marked), grade I (with BWR resin) with decorative veneers on one face and fixed with screws to timber frame work complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with screws

Material & labour for 12 mm thick plywood (ISI marked), grade BWP, type BB fixed with screws to timber frame work including 1st class HW leaping all around the shutter/edges and also , fixed with approved adhesive as per manufacturer's instructions and as directed.

Material & labour for 0.9 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions.

Supply & fixing in repairs Godrej night latch seven levers Inside Opening Pin Cylinder Technology (Brushed Steel) suitable for doors complete all as specified and directed.

Supply & fixing powder coated aluminium sections (minimum thickness of powder coating 50 micron) for partitions, windows, ventilators and doors including fabrication of frame/shutters and fixing to walls/floors with necessary lugs, jointing cleats etc including all accessories such as necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading, rollers, SS screws etc including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required complete all as specified Note :- (i) Glazing and wire mesh shall be measured and paid separetely . (ii) Item shall be paid as per weight of aluminium section. (iii) the rete quoted shall be inclusive of the cost of neoprene beading, glazing pin. screws and powder coated fittings such as hinges, handles, locking arrangement etc as required, which shall not be measured for arriving the weight. (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.

Supply and fixing 5.5mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm in each pane and fixed with powder coated aluminium beading and rubber beading to Ventilator/window complete all as specified and directed. . Note- Cost of aluminium beads and neoprene beads included in relevant item of aluminium window & Ventilators.

Supply & fixingSun control film, 50 micron non reflective type,sticked to glass as per manufacturers instructions and as directed by EIC ( Make - Garware or equivalent as approved by GE).

Supply & fixingaluminium powder coated Grill (DECO grill, DG 103 of 7.5 mm thick fixed with suitable 'F' section(No. 8584)15.30 x 23.40 x 1.40mm (minimum), fabricated and riveted to aluminium windows/ventilator complete all as specified and directed.

Supply & fixingin repairs stainless steel butt hinges medium weight of size 100mm complete all as specified and directed.

Supply & fixing aluminium anodised barrel tower bolts of extruded section, 150 mm length, ISI marked.

Supply & fixing extruded aluminium alloy handle fabricated type anodized 150mm long complete all as specified and as directed

Supply & fixing in repairs aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, 300 mm long , ISI marked.

Supply & fixing in repairs door stopper aluminium anodized white dale 40mm x 40mm and 2mm thick dia 150mm iong having rubber bush 25mm dia long (high) at end and fixed to door shutter with steel cadmium plated scrrew complete all as specified and directed.

Supply & fixing in repair decorative glass corner shelf round 10mm thick, 300mm size with stainless steel railing, fixed with D type stainless steel bracket on wall of approved design and pattern complete all as specified.

Supply & fixing in repair Telescopy channels,power coated with ball bearings,suitable for sliding SS kitchen bracket 60 cm long standard width,fixed over 2 nd class hard Wood rectangular fillet of sectional area exc 3 & n exc 6 sqcm, clean swan secured with screws and the fillets fixed on cuddapah stone with screws ,all as specified and directed.

Supply & fixing aluminium decorative type powder coated brackets suitable for 20mm dia curtain rod or similar articles complete all as specified and as directed .

Supply & fixing Brass Hat pegs, solid body,125mm to 175 mm fixed with screw on walls complete all as specified and as directed.

Supply & fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with powder coated aluminium beading and rubber beading to Ventilator/window complete all as specified and directed. Note- Cost of aluminium beads and neoprene beads included in relevant item of aluminium window & Ventilators.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of debris out of MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Material & labour for water proofing plaster for sunken portion in CM 1:3, 15 mm thick in two coats mixed with Pidiproof LW+ liquid water proofing chemical as per manufacturer's instruction and finishing the surface even and smooth without using extra cement. Note- Water Proofing Chemical shall be measured and paid separately.

Material & labour for PCC 1:7:12 type F2 using 40 mm graded stone aggregate as in filling sunken portion complete all as specified..

Material & labour for 40mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate mixed with Pidiproof LW+ liquid water proofing chemical as per manufacturer's instructions as sub floor complete all as specified.. Note- Water Proofing Chemical shall be measured and paid separately.

Supply only liquid water proofing compound Pidiproof LW+ complete all as directed

Material & labour for providing 12 mm dia holes of 75mm deep @ 0.6 m c/c at junction of beams, slabs and columns as co-ordinal points for inserting/pouring mixture of resin base latex polymer and cement slurry by pressure grouting includind sealing the holes with cement mortar 1:3 complete all as specified and as directed by Engineer- in- Charge.

Supply & fixing in repairs table Top ceramic wash hand basin vitreous china oval shape It has a smooth finish and (Colour approved by GE) of size 630x425x160mm, make is Jauqar fonte with including brass chromium plated waste coupling 32mm with long screwed and fly nuts ,incl 60 cm long,32mm dia PVC(flaxible) type waste pipe fixed as in repairs Make:- Jaquar cat part No JDS-WHT-25901 or equivalent of makes specified in PS

Supply & fixing in repairs 15mm pillar taps, cast copper alloy with captain heads chromium plated, fancy type screw down high pressure with long screwed for iron pipe all as specified and as directed. Make : Jaquar Cat Part No. DLX-507 or equivalent of makes specified in PS

Supply & fixing in repairs white vitreous china wash down water closet pan (pedestal pattern) including fixing bolt with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP aluminum hinges device complete connecting to P or S trap all as specified and directed. Make : Jaquar Cat Part No. ECS-801 or or equivalent of makes specified in PS

Supply & fixing in repairs PVC Valveless, syphonic action type, flushing cistern low level all accesories complete all as specified and directed. Make : ESSCO Cat Part No. WHE-183L or equivalent in Jaquar , kohler , Grohe

Supply & fixing in repairs tubular towel rail brass chromium plated 20mm dia D type 60cm long between flanges including a pair of brackets complete all as specified and directed. Make : Jaquar ESSCO Cat Part No. AEC-1111B or equivalent in Kohler, Grohe.

Supply & fixing in repairs of 32mm dia PVC (flexible) waste pipe 900 mm long complete.

Supply & fixing in repair 32mm dia brass chromium plated waste coupling for wash hand basins fixed in repair complete all as specified.

Supply & Fixing in repair cast iron nahani trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1, diameter of outlet 100mm bore complete all as specified and directed by Engr-in-Charge .

Supply & fixing 20mm dia aluminium decorative type powder coated curtain including necessary decorative brackets and fixed to wall with CP brass screws complete all as specified.

Supply and fixing in repair hot water extention pipe made out of copper chromium plated 450 mm long with brass adaptor and fixing in position complete all as directed.

Supply and fixing in repair 600 mm long PVC connectors with brass adapters, washers etc complete all as directed.

Supply and fixing in repair 270 ltr white rectangular PVC water storage tanks ISI marked (Loft tank) of capacity following sizes with complete fitting including fixing 03 Nos tank nipples of GI with washer for out let and inlet all as per manufacturers instructions including disconnecting service connections/over flow pipes and removing old tank complete all as specified and directed.

Supply and fix in repair 270 ltr PVC profile sheet suitable for PVC Loft tank including fixing aluminium/ PVC channel around the profile including removing of tank and refixing the same complete all as specified and directed.

Supplying and fixing in repairs 15 mm bore brass float valve, high pressure with polythene float & fly nut complete, screwed for GI pipe of following sizes including necessary GI fittings complete all as specified.

Supply and fixing in repairs bib tap fancy type15 mm dia ,CP cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule all as directed

Supply & Fixing Single Lever Wall Mixer With Provision of Hand Shower, But W/O Hand Shower chrome finished (with plating of Nickel-10 micron, chromium-0.3 micron and salt spray 200hrs + validated adhesion pass ) complete all as specified and directed by Engr-in-Charge.

Supply & Fixing overhead shower of 150x150 mm square shape (ABS Body chromium plated with gray face plate) with rubit cleaning system chrome finished (with plating of Nickel-10 micron, chromium-0.3 micron and salt spray 200hrs + validated adhesion pass ) complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in repairs 15 mm bore concealed angular stop cock with wall flange chrome finished (with plating of Nickel-10 micron, chromium-0.3 micron and salt spray 200hrs + validated adhesion pass ) complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in repairs 15 mm bore concealed stop cock with wall flange chrome finished (with plating of Nickel-10 micron, chromium-0.3 micron and salt spray 200hrs + validated adhesion pass ) complete all as specified and directed by Engr-in-Charge.

Supply & Fixing health faucet with metal flexible tube and wall hook ABS chrome finished (with plating of Nickel-10 micron, chromium-0.3 micron and salt spray 200hrs + validated adhesion pass ) fixed with chromium plated brass brackets and screw, diamensions 7cm x 2cm x 7cm and weighing 480 grams complete all as specified and as directed by Engr-in-Charge.

Taking down 15/20 mm bore, GI tubing and connections complete all as specified.

Supply & fixing15 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings with suitable size GI clamps or laid in floors complete all as specified.

Supply & fixing20 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings with suitable size GI clamps or laid in floors complete all as specified.

Cutting chases exceeding 20cm girth, pinning in, making good to facings where required and pointing in cement mortar 1:3 to brick walls, landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good complete all as specified.

Supply & Fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specification and drawings shown in SSR Part II.complete all as specified and as directed by Engr-in-Charge.

Supply & fixing30 mm thick factory made solid panel PVC door shutter (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification & manufacturers instructions.

Supply & Fix in repair toilet paper holder stainless steel of size120mm x 100mm including paper chrome finished (with plating of Nickel-10 micron, chromium-0.3 micron and salt spray 200hrs + validated adhesion pass ) fixed with chromium plated brass screw complete all as specified .

Supply & Fixing in repairs 15 mm bore CP bib cock two way With Wall Flange chrome finished (with plating of Nickel-10 micron, chromium-0.3 micron and salt spray 200hrs + validated adhesion pass ) complete all as specified and directed by Engr-in-Charge.

Taking down carefully aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials for taking credit (credit of items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified.

Material & labour for point wiring with 1.5 sqmm (nominal area) PVC insulated and unsheathed multistranded FRLS copper conductor cable 1100 volts grade drawn through and including PVC conduit not less than 20mm bore ISI marked with all accessories concealed in wall/ceiling and terminated in and including metallic ISI marked terminal box concealed in wall including 1.5 sqmm size PVC insulated, unsheathed, multistranded FRLS copper conductor cable for continuous earth conductor and connecting to earth dolly for the following :- Note: Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green

One light point controlled by one switch SP one way.

One ceiling fan point controlled with one 5A switch and regulator

One exhaust fan point controlled with one 5A switch

One 3 pin socket outlet 5Amps on independant board.

One 3 pin socket outlet 5 Amps on same board with other switches.

One bell point controlled by one bell push 5 Amps.

Material & labour for point wiring with 4 sqmm (nominal area) PVC insulated and unsheathed multistranded FRLS copper conductor cable 1100 volts grade drawn through and including PVC conduit not less than 20mm bore ISI marked with all accessories concealed in wall/ceiling and terminated in and including metallic ISI marked terminal box concealed in wall including 4 sqmm size PVC insulated, unsheathed, multistranded FRLS copper conductor cable for continuous earth conductor and connecting to earth dolly for One 5pin, 15 Amps switch socket combination on indipendent board. Note: Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green

Supply & fixing Modular Switch , 6Amp, One way, 1 module complete all as specified.

Supply & fixing Modular Switch , 16Amp, One way, 1 module complete all as specified.

Supply & fixing Modular type bell push , 6Amp, 1 module complete all as specified.

Supply & fixing Bell electric AC 230Volt single pole musical type with ISI mark.

Supply & fixing Modular type, electronic fan regulator ( 5 step ), 450 Watts, 230 volts, 2 module complete all as specified.

Supply & fixing ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified.

Supply & fixing Modular Socket oulet, 6 Amps, 2/3 pin combined 2 module complete all as specified.

Supply & fixing Modular Socket oulet, 6/ 16 Amps, 2/3 pin combined 2 module complete all as specified.

Supply & fixing Modular blank plate complete all as specified.

Supply & fixing Modular white cover plate with Frame 1 Module complete all as specified.

Supply & fixing Modular white cover plate with Frame 2 Module complete all as specified.

Supply & fixing Modular white cover plate with Frame 3 Module complete all as specified.

Supply & fixing Modular white cover plate with Frame 4 Module complete all as specified.

Supply & fixing Modular white cover plate with Frame 8 Module complete all as specified.

Supply & fixing Modular metal flush box 1 module complete all as specified.

Supply & fixing Modular metal flush box 2 module complete all as specified.

Supply & fixing Modular metal flush box 3 module complete all as specified.

Supply & fixing Modular metal flush box 4 module complete all as specified.

Supply & fixing Modular metal flush box 8 module complete all as specified.

Supply & fixing in repair baton integral sleek extruded polycarbonate LED channel with white acrylic cover of 1x20 Watt,lumen output 105 lm/ W with accessories internally prewired including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified.

Supply & fixing metal picture light 1x12 Watt, lumen output 420 lm/ W flexible neck for adjusting beam, bronze finish for superior feel, 3000K with warm white (Color rendering CRI>8) with complete accessories internally prewired and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.

Material & labour for Lamp holder, PVC/ Polycarbonate type with cord grip cap suitable for pendant fittings complete all as directed by Engr-in-charge

Supply & fixing LED lamp suitable for 14 watts, 240 volts, single phase, 50 Hz, Lumen 1450 AC supply.

Supply & fixing in repairs 8 way Double door type distribution board having protection IP-42, with 200 Amps rated copper bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size including locking arrangement complete all as directed.

Supply & fixing Isolator SPN 63 Amps, 240 Volts, C Series complete all as directed

Supply & fixing MCB SP 6-40 Amps, 240 Volts, C Series complete all as directed .

Material & labour for sub-main wiring with 2 runs of 4 Sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn through and including heavy grade PVC conduit not less than 25 mm bore with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 4 Sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly including taking down old submain wiring complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) 2 runs of 4 Sqmm cable, One run of 4 Sqmm earth cable and PVC conduit shall be measured and paid as one length only.

Material & labour for sub-main wiring with 2 runs of 6 Sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn through and including heavy grade PVC conduit not less than 25 mm bore with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 6 Sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly including taking down old submain wiring complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) 2 runs of 6 Sqmm cable, One run of 6 Sqmm earth cable and PVC conduit shall be measured and paid as one length only.

Taking down carefully Electric Heater (Geyser) of any capacity, sealing cable ends and Painting of Geyser complete with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust and refifixing the same in same position complete all as directed by Engr-in- charge.

Supply and fixing RCCB with MCB of 2 Pole, 25 Amps rating with sensitivity of 30 mA suitable for 240 Volts complete all as specified and directed.

Supply and fixing 15 Amps plug top, AC 230 volts, ISI marked.

Taking down carefully ceiling / Exhaust fan of any size, sealing cable end, dismantling blades carefully and removing fan and blades painting ceiling fans/exhaust fans with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc.and refixing at the same place including making all connections complete all as directed by Engr-in- charge.

Supply & fixing rigid non- metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc, medium grade, ISI marked, 25mm bore, for passing cable TV, internet, telephone cable complete all as directed.

Supply and fixing modular single pole & neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20 Amps 'C' curve complete with modular box & modular plate complete all as specified.

Supply & fixing telephone jack with pressed steel sunken box of suitable size with 3 mm thick PVC top cover complete all as specified.

ASHOK CONSTRUCTION

the bhimani group of companies

SHREE JAGDISH FURNITURE CO.

Shetty Construction Co

S S ENTERPRISES