REPAIR TO ROOF, CEILING, FLOORING, JOINERY, SANITARY FITTINGS and CERTAIN MISC WORKS AT OTM ACCN KHOJATOLI UNDER GE RANCHI

Amount

Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. Exc 1.5 Sqm each

Taking down chowkats or frame with shutters (without taking off shutters from the frames) but Exc 1.5 and n. Exc 4 Sqm each

Taking down shutters of any description n exc 1.00 Sqm each complete.

Taking down shutters of any description exc 1.00 and n . Exc 2 Sqm each complete.

Refixing of shutter of any description exc 1 sqm and n exc 2 sqm in same opening complete.

Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete.

M&L brick work with sub class 'B' brick straight or curved on plain exc 6m means radius build in cement mortar 1:6

All as per item No. 7 above but except bricks.

M&L brick work with sub class 'B' brick straight or curved on plain to any radius in half brick thick wall built in cm 1:4.

Demoliton of cement concrete in ground floor paving n exc 15cm thickness ( below or above ground level ) complete.

M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete

M&L Cement concrete 1:2:4, type B-1 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc complete.

M&L 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring finish even & smooth using extra cement complete all as spd.

Supply only 38mm wide glass dividing strips, 3mm thick complete.

M & L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame wealded/sealed to the stiles & rails with sutable PVC sheet beading and jointed togeather with solvent cement, fix in frame as spd.

S & F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed.

M&L for hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165

M & L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete.

M/L 35 mm thick Plain framed, paneled shutter (three panel) with lock rail and panel of 12mm plywood commercial on both faces. The size of rail and style as per IS: 1003(Part - 1), complete as directed.

S&F Factory made, Plain framed, panelled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated of 35 mm thick shutters.

S & F 35mm thick 2nd class hardwood glazed and skeleton shutters of 8 panels, divided into squares with plain, chamfered or rounded, mitred & rebated sash bars and prepared to receive glass, gauze etc edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for doors, etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (a). Sample of shutter can be seen in GE's office.

S & F 35mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for windows, ventilators,etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (b).

S&F block boards 18/19mm thick gde 2 quality, interior grade, commercial type for cupboard shutter, shelf, etc complete

S&F in repair 12mm thick pre-laminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for cupboard shutter, shelf, etc complete

S&F steel windows with side hung shutters including box type hinges with one No MS handle per leaf made of FI 25 x 3 mm made to shape Appx 200 mm in length and two Nos 150mm long MS tower bolt welded to each shutter including 150 mm long peg stay, complete with glazing bars, dovetailed or welded all as specified.

All as per item No 27 above but without glazing bars complete

S&F steel window, ventilators, fixed type, with glazing bars

S&F framed work as in doors or gates of angle or other section with guset plates complete doors etc to be prepared to hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete.

S&F 0.60mm thick Mild steel, plain, black sheet in covering to door shutters; covering to door chowkats (frames) cut to size edges beaded if directed, holes punched;incl round headed screws, clout nails or rivets and fixed to wood or steel members, etc.,with plain 40 mm lap joints or welded/riveted seams including bending, turning up,mitred angles, stopped ends, outlets, etc. as reqd complete

S&F framed work such as grills gratings etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed, baluster walk ways, railings, framework of water tanks & similar wk conforming to Fe410-0 or Fe310-0 .

S&F Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as spd.

S&F in repair Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as spd.

Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. Exc 0.5 Sqm in each pane.

S & F 3.5 mm thick frosted glass pin head type and glazing with oil putty in squares exc 0.5 Sqm in each pane etc complete all as spd and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 125 mm long.

S&F Aluminium anodised handles of extruded section and fixed 125 mm long.

S&F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed.

S&F 75 mm size Butt hinges medium weight cold rolled stainless steel and fixed.

S&F 100mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete.

S&F small fitings of 2nd class hard wood such as brackets of any type, latch and hing block shape door, window stops and the like incl all necessary labours articles not exc 200 cucm each.

S&F 300 mm long mild steel sliding door bolt with hasp, staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed.

MS ordinary rat tail rod pattern springs 200mm, including roller and roller plate complete.

M&L preparation of new wooden surface any description over 10 cm width or girth and applying two coat synthetic enamel paint over a coat pink primer all as spfd .

M&L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete.

Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water complete.

M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even and fair without using extra cement

M&L Rendering 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and fair without using extra cement

10 mm thick cement plastering in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed.

Preparation of new plastered surfaces of walls using sand paper and applying two coats of cement base paint over a coat of cement base primer complete all as specified and as directed.

Preparation of new plastered or unplastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified and directed

Preparation of new plastered or unplastered surfaces and applying three coats of white wash on wall surfaces complete all as specified and directed

Preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified.

Preparation of old plastered or unplastered surfaces of wall and applying one coat of white wash complete all as specified.

Preparation of old plastered surfaces of wall and applying two coat of cement base paint incl removal of existing treatment.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete.

M&L for Machine pressed precast concrete interlocking paver block 60mm thick with grey cement and pigment any shape and size confirming to IS 15658-2006 of M-35 grade Complete.

M&L Sand filling under floors or in foundations including watering and consolidation

M&L coloured ceramic glazed tiles 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement.

M&L coloured ceramic glazed tiles 200mmx75mmx6mm thick suitable for border etc including 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement.

M&L coloured ceramic glazed tiles 300x200x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement.

M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete

All as per Item No 65 above but as in Skirting with 10mm thick rendering in CM 1:3

M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete

All as per Item No 67 above but as in Skirting with 10mm thick rendering in CM 1:3

M&L for 14 to 16 mm thick granite (of any type), as in cooking plateform etc set in CM 1:4 and grinding and polishing and rounding / moulding the edges complete.

Demolition of cement concrete reinforced as in chullah hoods, chajjas, parapet, shelves and plate form etc complete all as specified and directed

M&L for RCC as in kitchen platform, shelves etc type BO 1:2:4 (12.5 mm graded aggregate) including necessary form work complete all as specified

S&F mild steel deformed bars 8 to 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking and binding with and including mils steel wire (annealed) not less than 0.9 mm dia quality conforming to Fe-410-S or F-410-0 etc all as spd.

S&F in repair 500 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I

S&F in repair 1000 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I

S&F PVC ball valve 20mm dia with epoxy coateed aluminium rod and high density ball (minium weight 210 gms) complete as directed .

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers, waste coupling, waste pipe incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as directed and specifed .

Taking up or steel tubing & connections including cleaning for refixing bore of pipe 15mm etc complete all as specified and directed

S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 15mm bore etc complete all as specified and directed

Refixing old galvanised steel tubes & connections on wall 15 mm bore complete all as specified and directed .

Taking up or steel tubing & connections including cleaning for refixing bore of pipe 20mm etc complete all as specified and directed

S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 20mm bore etc complete all as specified and directed

Refixing old galvanised steel tubes & connections on wall 20 mm bore complete all as specified and directed .

S&F in repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

S&F in repair for Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

S&F in repair bib tap 15mm fancy type of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed .

S&F in repair bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed .

S&F in repair stop valve 15mm chromium plated screw down, high pressure with crutch or butterfly handle, screwed fboth ends for or iron pipe or for unions and fixed complete all as specified and directed

All as per above Item No 87 above but two way angle cock

S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand including dismantling

S&F in repairs15mm dia pillar tap cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed

S&F in repairs 15 mm dia concealed type stop valve fancy type chromium plated etc complete all as specified and directed

S&F in repair Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc complete all as directed and spd.

S&F in repair MS conduit curtain rod with PVC coating fancy type drafry rod 20mm dia of any colour as a spproved with bracket and fixed to wall complete all as spd and directed.

S&F fancy type sofia brakcet for the curtain rod (suitable for 20mm dia curtain rod) of any approved colour and design all as spd and directed.

M&L as in repairs, Vitreous china urinal half stall type, white with grating and union for discharge pipe incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, flush pipe, waste pipe, grating and union for discharge pipe complete.

Viterous china ware water closet pedestal pan white in colour 'P' or 'S' trap with plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated hinges device and brass chromium plated jet for English style WC fixed with screws complete suitable for 15mm dia connection. complete all as specified and fixed in repairs

S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete.

S&F in repair PVC connection 450mm long with two PTMT nuts (Prayag)

S&F CP towel rail, 20mm dia, D type,60cm long complete all as approved and directed by the EIC

S&F in repair PVC flushing cistern 10 ltr capacity including bracket fixed to wall & flush pipe complete of make-Parryware-slimline/ Commander-water bird

S&F in repair 32mm bore waste coupling of PTMT (half or full threaded) (Min wt 45 gms) Complete.

S&F in repair 40mm bore waste coupling of PTMT (half or full threaded) (Min wt 45 gms) Complete.

S&F in repair 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6kgf/sqcm Complete.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete.

M&L providing cement concrete type B1, 1:2:4 (20mm graded aggregate) as in roof kerbs or mud stop, benching rounded or chamfered on edges, chajjas and the like all as specified and directed

M & L for welding in repairs to metal n exc 6 mm thick and length exc 2.5 cm and n exc 5 cm

S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc complete, size of frame 105x60mm complete all as specified.

All as per item No 108 above but size of frame 125x60mm complete.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 110mm dia

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 75 mm dia

S&F PVC (SWR) bends/shoes any radius of 110mm dia

S&F PVC (SWR) bends any radius provided with access door of 110mm dia

S&F PVC (SWR) bends any radius provided with access door of 75 mm dia

M&L for providing water proofing treatment to sunken slabs of toilets with standard water proofing polymeric membrane of 3 mm thick and weight not less than 3 Kg /SM with 90 micron molecular high density polythene film, sand witched between two layers of polymeric membrane laminated on both sides with 20 micron HM HDPE film over a coat of hot blown bitumen of grade 85/25 applied at the rate of 1.20 Kg/SM after priming the surface with bitumenous primer conforming to IS 784 ( @ 0.30 lts/SM) ,over lapping of membrane shall be fixed uniformly by LPG torch flames all as specified and directed as on roof surfaces.

M&L PCC 1:5 :10, type E-2 ,using 40 mm aggregates as in sunken slab filling complete all as specified and directed.

PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in roof kerbs, benches and water troughs etc. including necessary moulding complete all as specified & directed.

M&L for antifungal Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment over & including 20mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors complete.

M & L for preparing old plastered surfaces of wall by scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and and applying one coat of distemper oil emulsion, white or tinted complete all as directed.

BUILDCON ENTERPRISES

BHARATI ENTERPRISES

M K Enterprises

india trading company

Raj Construction

Balaji Construction And Company