PROVN OF COOK HOUSE CUM DINING HALL AND PROVN OF SINGLE JCO LIVING ACCN WITH ATT WASHROOM AND SEWAGE UNDER AGE B/R-II AT GE GWALIOR

Amount

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft loose soil complete all as specified and directed.

M&L for surface dressing not exceeding 15 cm deep complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes, pier holes, etc. but not exceeding 10 Sqm on plan and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and exceeding 1.5 m & not exceeding 3.0m in depth; for foundations etc. or for shafts, well cess pits, manholes, pier holes, etc. but not exceeding 10 Sqm on plan and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in loose/soft soil complete all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at alevel not exceeding 1.5m above the starting point complete all as specified and directed.

Removing excavated material exceeding 250 m & not exceeding 500m and depositing where directed at alevel not exceeding 1.5m above the starting point complete all as specified and directed.

M&L hard core of for broken stone boulder of gage not exceeding 63mm deposited, spread and levelled in layers not exceeding 150 mm thick watered and well rammed to a true surfaces complete all as specified and directed.

Moorum or red bajri filling in pavings, laid in layers not exceeding 15 cm thick, spread, levelled and well rammed including watering as required complete all as specified and directed.

M&L Plain cement concrete (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundations / mass concrete complete all as specified and directed.

M&L for reinforced cement concrete Design mix M-25 by using 20 mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams base for coloumns and mass concrete etc complete all as specified and directed.

M&L for reinforced cement concrete Design mix M-25 by using 20 mm graded crushed stone aggregate as in coloumns, pillars, piers, posts and struts etc complete all as specified and directed.

M&L for reinforced cement concrete Design mix M-25 by using 20 mm graded crushed stone aggregate as in Roof beam, lintel band, cantilevers bressummers, lintels over 1.5m span etc complete all as specified and directed.

M&L for reinforced cement concrete Design mix M-25 by using 20 mm graded crushed stone aggregate as in slab supported on walls, beams, columns in floor, roof, landing complete all as specified and directed.

M&L for reinforced cement concrete Design mix M-25 by using 20 mm graded crushed stone aggregate as in stairway (except spiral stair case) including steps, string peices complete any section straight or windig but excluding landing slab complete all as specified and directed.

M&L for reinforced cement concrete Design mix M-25 by using 20 mm graded crushed stone aggregate as in chajjas complete all as specified and directed.

M&L Formwork to sides of concrete in foundations, footings, base of columns, raft, raft beam & plinth beams in flat for rough finshed surfaces of concrete complete all as specified and directed.

M&L Form work to Columns, square or rectangular, rough finish surfaces of concrete complete all as specified and directed.

M&L Formwork to soffits of suspended slab such as roof slab, floor slabs, landing and similar work; not exceeding 200mm thick complete all as specified and directed.

M&L formwork to sides and soffits of floor or roof beams, beam haunchings, lintel bands, cantilevers shelves incldng supports, overhangs etc comlete all as specified and directed.

M&L Formwork to chullah hoods, chajjas, troughs and similar items including edges comlete all as specified and directed.

M&L Formwork to edges of concrete flats, treads, breaks in floors, window cills concrete railings, opening in concrete walls, floor and roofs slab not exceeding 200 mm wide and sides of RCC/PCC bands in walls, exceeding 100mm and not exceeding 200mm wide complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with steel clips quality complete all as specified and directed.

M&L for mild steel TMT bars, 6 to 8 mm dia over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M&L for mild steel TMT bars 6 mm dia and over upto and including 10 mm dia as in stirrups or spacers, and binders, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface & plinth protection complete all as specified and directed.

M&L for treating the soil back-fill in contact with foundation at the rate of 7.5 litre of emulsion per square meter of vertical surface (area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

M&L 40 mm thick plain cement concrete 1:2:4 type B-1 using 20 mm crushed stone aggregate as in flooring complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick (of size 550x550 mm) over 20mm thick cement screed bed in CM 1:6 laid & jointed with grey cement slurry mixed with pigment to match the shade of the kota stone slab including rubbing & mirror polishing complete all as specified and directed.

M&L Machine cut kota stone slab flooring 12-15mm thick over and including 10 mm thick backing layer in CM 1:4 on riser of steps, skirting, dado laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone slab including rubbing & mirror polishing complete all as specified and directed.

M&L Granite slab 20 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match the colour of stone over and including 20 mm thick screed bed in Cement sand mortar in 1:3 the shade of granite stone including cutting and polishing type as in cill and jamb or skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing complete all as specified and directed.

M&L coloured vitrified ceramic tiles 8-10 mm thick, light coloured shade in square or rectangular polished, area of each tile not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment in cement to match the colour of tiles over and including 15 mm thick screed bed in Cement sand mortar in 1:6 as in floors complete all as specified and directed.

M&L coloured vitrified ceramic tiles 8-10 mm thick, light coloured shade in square or rectangular polished, area of each tile not exceeding 0.36 Sqm, in vertical surface set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment in cement to match the colour of stone over and including 10 mm thick screed bed in Cement sand mortar in 1:4 as in vertical surface complete all as specified and directed.

M&L for digital glazed ceramic coloured tiles in vertical surface 300mmx450x7 mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement to match, aid over and including 10 mm thick rendering on fair faces brick work or concrete surface in cement plaster 1:4 complete all as specified and directed.

M&L for Brick work with old size fly ash bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

M&L for brick work with old size fly ash bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 in half brick thick wall complete all as specified and directed

M&L for random rubble un-coursed, well bounded, bedded and solidly hearted masonary work built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with sub class "B" bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces in cement mortar 1:6 and surface finished even and fair complete all as specified and directed

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with WPC and surface finished even and fair complete all as specified and directed

M&L for 10 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces in cement mortar 1:4 and surface finished even and fair complete all as specified and directed

M&L for 5mm thick rendering in cement mortar on ceiling or roof surfaces in cement mortar 1:3 and surface finished even and fair without using extra cement mixed with WPC complete all as specified & directed

Supply only integral liquid water proofing compound (ISI marked) complete all as specified and directed.

Preparation of new plastered surfaces of wall and applying 2 mm thick wall care putty over one coat of chalk whitening and rubbed with sand or emery paper and applying two coat of acrylic oil bound distemper complete all as specified and directed.

M&L Preparation of new plaster surfaces of wall and applying one coat of alkali resisitant primer and applying two coat of cement base paint complete all as specified and directed.

M&L Preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

S&F pressed steel door frame of 105mmx60mm with one or more rebate including necessary fixing lungs and butt hinges medium class, lock strike plate etc complete all as specified and directed

S&F pressed steel door frame of 125mmx60mm with one or more rebate including necessary fixing lungs and butt hinges medium class, lock strike plate etc complete all as specified and directed

M&L for providing cement concrete1:3:6 type C-0 using 12.5mm stone aggregate as in filling inside pressed steel door frame or leveling course complete all as specified & directed.

M&L for 35 mm thick factory made 2nd class Hard Wood, plain framed factory made panelled door shutters (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board medium density, wood particle board with commercial veneering on both face IS: 1003 (Part-I) kiln seasoned and chemically pressured treated complete all as specified and directed.

M&L for 30mm thick glazed and skeleton factory made door shutters of 2nd class Hard Wood, open rebated and prepare to reveive glass, guage etc (without sash bars) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc, size of members of shutters as specified complete all as specified and directed.

S&F butt Hinges medium weight, stainless steel 100 mm size fixed with steel screws complete all as specified and directed.

Supply & Fixing 250 mm long steel sliding door bolt with hasp & staple (clip & bolt type) and fixing clips of sheet complete all as specified and directed.

Supply & Fixing for 150 mm Aluminium handles cast type anodised and fixed with steel screw complete all as specified and directed.

S&F for 200 mm long aluminum anodized barrel tower bolts of extruded section and fixed with steel screws complete all as specified and directed.

Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification & drawings complete all as specified and directed.

Supply & Fixing 30mm thick factory made solid panel PVC door shutter (style) consisting to frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Penelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

Supply & Fixing factory made steel windows with side hung glazed window including projecting type hinges with steel handles and steel peg stays complete with glazing bars, dovetailed or welded joints complete all as specified and directed.

Supply & Fixing factory made steel windows with side hung glazed window including projecting type hinges with steel handles and steel peg stays complete without glazing bars, dovetailed or welded joints complete all as specified and directed.

Supply & Fixing factory made steel vetilator with top hung glazed shutters including projecting type hinges, with steel handle and steel peg stays complete with glazing bars complete all as specified and directed.

Supply & Fixing factory made steel vetilator with top hung glazed shutters including projecting type hinges, with steel handle and steel peg stays complete without glazing bars complete all as specified and directed.

M&L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows & ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

M&L for Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator (adequate track) without sash bars, aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware 100 mm handles, 150 mm barrel tower bolts, 100 mm but hinges etc powder coated aluminum snap beading, steel screws complete all as specified and directed. Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately.

S&F for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290, E-165 complete all as specified and directed.

S&F 3mm thick Sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified & directed.

S&F 300 mm MS ordinary rat tail rod pattern springs including roller and roller plate fixed with steel screw complete all as specified and directed.

S&F floor door stopper of steel body and tongue overall length of plate 150 mm with hard drawn steel spring fixed to shutters with steel screws complete all as specified and as directed.

S&F 25mm dia stainless steel curtain rod not less than 0.80mm thick including fixing of ends brackets (minium 2 nos at every 1.50m length) complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

M&L for applying two coats of synthetic enamel paint on new steel surfaces including preparation of steel surfaces with sand or emery paper over one coat of red oxide primer complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on wooden surface including preparation of surface and including and over one coat of pink primer complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-2 Using 40 mm graded crushed stone aggregate, finished the surface even and smooth without using extra cement as in plinth protection including forming of joints 10mm wide and 65mm deep and joint filled with sealing compound Grade-A complete all as specified and directed.

M&L 10 mm thick screed bed or beddinglayer in CM 1:4 over roof surface finished even and Smooth mixed with water proofing compond complete all as speceified and as directed by Engineer-in-charge. Note : Water proofing compound shall be measured and paid separately under respective item of BOQ.

M&L applying water proofing treatment with the following coats :- (a) First coat of bitumen primer conforming to IS: 3384 @ 0.3 Kg/Sqm (b) Second Layer of APP based polymectric membrane minimum weighing 3Kg /Sqm and minimum 3 mm thick reinforced with polyster non-woven fabric (wt not less than 150 gms /Sqm) and on primed / sealing the surface by torch application complete all as specified and directed.

M&L two coats of bituminous based aluminium paint over polymetric membrane complete all as specified and as directed.

S&F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position complete all as specified and directed.

S&F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position complete all as specified and directed.

S&F for 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F for gun metal globe valve with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and directed.

S&F for gun metal globe valve with iron wheel head screwed both ends for iron pipe of 25mm bore complete all as specified and directed.

S&F 15mm bore Galvanised iron water tubing medium grade and connection with all fittings fixed in walls or in floors or ceiling with steel clamps complete all as specified & directed.

S&F 20mm bore Galvanised iron water tubing medium grade and connection with all fittings fixed in walls or in floors or ceiling with steel clamps complete all as specified & directed.

S&F 25mm bore Galvanised iron water tubing medium grade and connection with all fittings fixed in walls or in floors or ceiling with steel clamps complete all as specified & directed.

S&F for 15mm bib tap cast copper alloy chromium plated fancy type long body with brass ceramic disc spindle and capston heads scewed down high pressure with or without lettered 'hot' or Cold' with long shank srewed and flynuts srewed for iron pipe fixed and complete all as specified. Make: Neptune series of Prayag or similar in PARRYWARE / CERA / JAQUAR / HINDWARE

S&F 15mm angle cock cast copper alloy chromium plated with brass ceramic disc spindle and capston heads scewed down high pressure srewed for iron pipe fixed and complete all as specified. Make: Neptune series of Prayag or similar in PARRYWARE / CERA /JAQUAR/HINDWARE

Supply & Fixing vitreous china wash basin basin white colour flat back size 550mmx450mm with and including waste fittings, brass chromium plated for basin with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including supply & fixing cast copper alloy chromium plated fancy type pillar tap 15mm bore scrwed down high pressure with or without lettered hot or cold with long shanks, screwed for iron pipe complete all as specified and directed.

Supply & Fixing for viterous china wash down water closet pan (pedestal pattern) white fixing bolts & flush pipe (excluding flushing cistern) including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & on CP Jet complete all as specified & directed.

S&F plastic water closet seat cover white coloured closed pattern with flat bottom and cover and mild steel chromium plated hinging devise complete all as specified and directed.

S&F for PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float end handle including MS bracket or fastener complete of capacity 10 lit complete all as specified & directed.

S&F tubular towel rail of brass chromium plated 20 mm dia, D type 600 mm long betweem flanges fixed with steel screws complete all as specified and directed.

S&F PVC connections 15 mm dia and 450 mm long with brass nuts complete all as specified and directed.

S&F corner glass shelf 300mm (with ABS Bracket) complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with chromium plated bracket and railing guard 60cm long completed all as specified and directed.

S&F for wall mixer with two in one pattern in of brass CP complete all as specified and directed. Make : Neptune series of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE.

S&F for Brass CP WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified. Make : Neptune series of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE

S&F shower rose brass chromium plated with or without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed.

S&F Flushing jet Spray (chromium plated) for padestral pattern EWC including 1.2 metre tube flexible pipe and brass chromium plated nuts completed all as specfied and directed.

S&F for PVC bath room cabinate mirror of Size 500mmx400 mm make Prayag Cat No. 556 or similar in other make complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm bore single sockets in any length with rubber ring joints laid in floors or walls fixed with MS clamps complete all as specified and directed.

S&F PVC (SWR) pipe 110 mm bore single sockets in any length with rubber ring joints laid in floors or walls fixed with MS clamps complete all as specified and directed.

S&F PVC (SWR) Single junction (single T) equal or unequal 75 mm bore pipe any radius with access door complete all as specified and directed.

S&F PVC (SWR) Single junction (single T) equal or unequal 110 mm bore pipe any radius with access door complete all as specified and directed.

S&F PVC (SWR) bends 75 mm bore any radius with access door complete all as specified and directed.

S&F PVC (SWR) bends 110 mm bore any radius with access door complete all as specified and directed.

M&L for PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.

M&L cast iron nahani trap 75mm dia with CP grating including jointing to waste pipe fixed in cement concrete 1:2:4 base type B-1 complete all as specified & directed.

M&L for PVC (SWR) gully trap 125/110 mm setting and jointing with cement solvent or adhesive complete all as specified & directed.

S&F Soap dish of CP fixed with pvc rawal plugs and screw complete all as specified and directed.

S&F for peg set (six hooks) MS sheet powder coated fixed to wall with PVC plugs and screw complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in bed to drain pipe including packing under and hunching against the sides of pipes after they are laid and tested complete for pipe size of 150mm bore all as specified & directed.

M&L for 150 mm bore Reinforced concrete pipes, class NP-2 laid and jointed with cement solvant complete with collars all as specified & directed.

M&L for providing cement concrete 1:2:4 type B-0 using 12.5mm crushed stone aggregate as in surfaces channels drains and benching including necessary form work and finishing fair and smooth using extra cement (forming fair finished channel shall be measured and paid for separately) complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in cover slabs for man holes or drain and set in CM 1:4 including necessary from work complete all as specified & directed.

Cutting into existing manholes for connecting new drains or pipes of 150 mm bore & making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

Cutting of existing Cast iron pipes in position for insertion of new tees, for branch connection of 25 mm dia from bore of pipe existing CI pipe including excavation in trenches and RFR complete all as specified and directed.

S&F for 18 mm thick PVC Celuka ply of both side prelaminated one face teak and other side plain white colour fixed with steel screws fevicoal adhesive / solvent cement complete all as specified & directed.

S&F for Haps and staple safety type Aluminium anodised with MS hinge pin including bolt to hinge pin of 100 mm size fixed with steel screw complete all as specified & directed.

S&F for aluminium anodised barrel tower bolts of extruded section of 100mm size complete all as specified and directed.

S&F for extruded aluminium alloy handle of 100 mm size fabricated type anodised complete all as specified & directed.

S&F steel sink with drainage board made out of stainless steel 0.9mm thick kitchen or laboratory with plugs washers and PVC waste pipe 32 mm dia 600 mm long including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade-304) railing made of hollow tubes, channel, plates including welding, griding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary stainless steel dash fasteners, stainless steel bolts of required size on the top of floor or the side of waist slab complete all as specified & directed.

Preparattion of surfaces for writing Building numbers and applying two coat of synthetic enamel paint back ground 30 cm dia and writing letters (Block, Roman, italic or indian) of not exceeding 10 cm height, width of letter shall not be less than 15mm with approved tint of synthetic enamel paint complete all as specified and directed.

Preparattion of surfaces for stops, commas, lines, brackets and making outer boarder with approved tint of synthetic enamel thick paint and applying two coat of synthetic enamel paint complete all as specified and directed.

Material & Laying 60mm thick factory made coloured chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways parking of required size & shape made by table vibratory method using PU mould, laid in required pattern laid over and including 50mm average thick of compacted bed of fine sand compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through compaction by using plate vibrator filling the joints with sand and cutting of paver blocks as per required size & pattern and sweeping extra sand complete all as specified & directed.

Material & Labour or laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement & 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm) including making drainage opening wherever required complete all as specified & directed.

M&L for cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seimic and other similar bands, plinth course/bed blocks/copings, string course, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 Cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm complete all as specified & directed.

M&L concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS: 694-2010 having multi-stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS: 14930 (Part-I) 2001 PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with steel screws and cup washers duly painted with two coats of anti corrosive paint / black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets complete for the following:-

One light point controlled by one switch.

One Ceiling Fan point controlled by one switch.

One Exhaust fan point controlled by one switch.

One 3 pin socket outlet 5 Amps controlled with one switch on the same board.

One 3 pin socket outlet 5 Amp controlled by one switch on independent board.

One bell/buzzer point controlled by one switch.

Description all as per item No. _132_ here in before but point wiring with 2.5 Sqmm FRLSH confirming to IS: 694-:2010 multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 Ssqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire.

S&F modular switch piano one way 5/6 Amp complete all as specified and directed.

S&F socket outlet 5 Pin 6 Amp 2 module complete all as specified and directed.

S&F modular switch piano one way 15/16 Amp 1 module complete all as specified and directed.

S&F socket outlet 5 Pin 15/16 Amp 2 module complete all as specified & directed.

S&F modular bell push flush type 5 Amp complete all as specified and directed.

S&F electronic bell AC 230 volt single pole complete all as specified and directed.

S&F electronic fan regulator 2 module capacity 120 Watt, 240 volts, AC 50Hz complete all as specified and directed.

S&F ceiling rose surface bakelite 60mm dia three terminal complete all as specified and directed.

S&F Lamp holder with metal ring PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked with & including 9-10 watt LED bulb complete all as specified & directed.

S&F Decorative ultra slim LED tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use 20 watt, 6500K fitting incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked twin core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

S&F security light fittings better optics for uniform distribution IP-65 protection LED of 30 watt, Heat resistance glass, pressure die-cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.6RM fixed to wall with 02 Nos FI clamps made of 40x5 mm 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked 03 core copper conductor for connection from box to light fittings including testing on completion all as specified and directed.

S&F MCB DB sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (Metal door) type with blanking plates where required and IP-43 degree of protection complete all as specified and directed.

S&F MCB SPN 63 Amp 240 volts 'C' series 16 KA including connection with suitable size copper lugs complete all as specified and directed.

S&F MCB SP 240 volts 6-32 Amps 'C' series 10 KA including connection with suitable size copper lugs complete all as specified and directed.

S&F sheet metal enclosure single pole & neutral with a two pin and earth plug and socket with and including one single pole MCB SP 20 Amp 240 volts10 KA breaking capacity complete all as specified and directed.

M&L sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS: 694-2010 multi stranded copper conductor (ISI marked with valid CML No) cable 1100 Volt grade 6 Sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS: 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and PVC conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing.

All as per serial item number _149_ above but 4 Sqmm copper conductor wire complete all as specified and directed.

All as per serial item number _149_ above but 1.5 Sqmm copper conductor wire complete all as specified and directed.

Supply & Fixing Photometric sensor outdoor type 220-240 volt ambient light <5-15 lux working temparature -20±4°C working humidity <93% RH along with pvc connection of 6 to 10 Amp capacity complete all as specified & directed.

Supply & Fixing modular plate and provising of new modular plate of size white cover palte with frame 2/3/4 module including fixing them in new board. Note : replacement of any switches, sockets, fan regulator will be measured under separated items.

Supply & Fixing modular plate and provising of new modular plate of size white cover palte with frame 6/8/12 module including fixing them in new board. Note : replacement of any switches, sockets, fan regulator will be measured under separated items.

Supply, laying, jointing & testing cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 4Core complete all as specified & directed.

Supply, laying, jointing & testing cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 Sqmm 3½ Core complete all as specified & directed.

Supply & Fixing cable jointing kit for 1.1 KV grade cable for end joint complete with Jointing material heat shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Aluminium conductor cable of size 25 to 50 sqmm copmplete all as specified and directed.

S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer 100 Amp 4 pole & Including MCCB 100 Amp 4 pole 16 KA breaking capacity complete (when MCB's are to be used) with suitable size of busbar complete, fixed flush in wall including cutting / chases in walls for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.

Material & labour for sand coushioning for protection of cable or filling under floors or in foundations (including watering and consolidation) complete all as specified & directed.

S&L Bricks old size sub class `B' laid in trenches with width wise along the alignment of the cable as cable protection complete all as specified & directed.

S&F gavanised iron water tubeing 'Light' grade with all fitting laid in trenches or fixed to wall or laid in floor of 50 mm dia for cable protection complete all as specified and directed.

Supply & fixing BEE 5 star rating BLDC energy efficient ceiling fans 1200 mm sweep with minimum air delivery 210 cum/min, down rod all accessories required including regd length of twin core 1.0 Sqmm PVC multistranded copper conductor, PVC connector for proper hanging of fan and testing complete all as specified and directed.

Supply & fixing Exhaust fans heavy duty(ABS body) AC single phase 230 Volt of size 250 mm sweep with louver having less sound complete all as specified and directed.

Supply & Fixing Exhaust fan heavy duty steel body double bearing AC single phase, 230Volt of size 450 mm sweep copper wound with blades, frame & Louvers, energy saving including cutting of walls & making good complete all as specified and directed.

Supply & Fixing refrigerator electric driven (single phase) capacity upto 190-200 Litres BEE 5 star rated complete all as specified & directed.

Supply & Fixing water cooler electric driven (single phase) having approx water storage capacity of 80 litre internal tank made with stainless steel and nominal cooling capacity of 40 Litres per hour & making water connection and fixing on walls with suitable fasteners complete all as specified & directed.

Supply & fixing electric water heater storage type steel body and copper inner tank, 25 Ltrs capacity electric operated suitable for single phase, 50 Hz, AC Supply 5 star rating including all necessary fittings and fixture such as safety valve, thermostate, NRV with minimum 1M of three core 2.5 Sqmm twisted copper conductor cable PVC sheated three pin plug top capacity 15 Amp complete with necessary fittings and fixtures and fixing on walls with suitable fasteners complete all as specified and directed.

Supply & fixing water heater storage type metallic outer body and copper inner tank, 50 Ltrs capacity electric operated suitable for single phase, 50 Hz, AC Supply 5 star rating including all necessary fittings and fixture with minimum 1M of three core 2.5 Sqmm twisted copper conductor cable PVC sheated three pin plug top capacity 15 Amp complete with necessary fittings and fixtures and fixing on walls with suitable fasteners complete all as specified and directed.

Supply & Fixing Voltage stabilizer for automatic operation, single phase naturally air cooled copper wound indoor type & designed for input variation between 170 to 250 Volt with output voltage stabilized at 230 Volt with accuracy of ± 2.5% and of capacity 2 KVA complete all as specified & directed.

Supply & Fixing Voltage stabilizer for automatic operation, single phase naturally air cooled copper wound indoor type & designed for input variation between 170 to 250 Volt with output voltage stabilized at 230 Volt with accuracy of ± 2.5% and of capacity 1 KVA complete all as specified & directed.

Supply & install desert cooler AC supply electric driven (single phase), 1400 rpm,h aving nominal air flow capacity of 5000 Cum/ hour complete with steel sheet body construction is top cover, side supports angle & water storage tank with 20 SWG & side panels with 22 SWG steel Sheet as per standerd design of manufacturers with MS grills & 2 RM 1.5 Sqmm twin core copper conductor cable with one ends plug top 15 Amp complete all as specified and directed.

Material & labour for Solid drawn, seamless, de-oxidized, non-arsenical, half-hard, tempered and de-greased copper pipe conforming to EN 13348: 2008 with all copper fittings and all exposed pipes should be painted with two coats of synthetic enamel paint and colour codi-fication should be as per IS: 2379 of 1963 including pipe fixing with clamps made of non-ferrous or non-deteriorating plastic suitable for the 15mm (OD) with 0.9 mm thickness of the pipe complete all as specified and directed.

Supply, Installation, testing & commissioning of 15 mm OD Line Valve or Isolating Valve as per CE Certified/HTM-2022/02-01/DIN/ISO/ BS EN-1057 or ball valves as per BS: 1057, rated at 400 psig, as well as full vacuum (29.9" Hg) Valves go from full ON to full OFF by turning the vinyl gripped valve handle 90 degree Locking-type handles. Copper tubing is factory installed to help prevent valve seat damage during soldering, main and riser valves are not required to be installed in a box unless specially noted or required complete all as specified and directed. Make: CONEX/ RB/RN/SIM/AUDCO/AKTIV

Supply, Installation, testing & commissioning of 15 mm OD Connection valve for LPG Cyclinder as per CE CERTIFIED/HTM-2022/02-01/DIN/ ISO / BS EN 1057 complete all as specified and directed.

S&F LPG leak detector complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600mmx600mmx6mm thick burried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded crushedstone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with MS sheet funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor (Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed.

M/s NILAY ENGINEERS (BID ID -3041634)

SHRI RAM CONSTRUCTION (BID ID -3041411)

M/S Rajeev Construction (BID ID -3037620)

M/s. Ravi and brothers (BID ID -3049646)

ASHISH SHARMA (BID ID -3049999)