Providing Additional Amenities arrangements

Paving the Top of roof with Solar refelective ceramic tiles of size 305 x 305 x 7mm of approved quality and colour laid in Cement mortar bed in 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with water resistant tile epoxy grout for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing.The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete

Manufacturing, Supplying and Fixing of Mosquito net arrangements for window with following specification. The shutter are made of good quality of fibre with approved and brand and the mosquito net made of aluminium insects screen in mgnunium 10 mesh per linnr inch and dia of mesh is 0.508 mm dia and opening of 2.03mm to a standard weaving as per of ANSI 1/ AWCI 01 1992. The screen placed frames sealed and fitted to the windows. The shutter can easily opened and closed. The cost includes cost of fibre frame, mosquito net, fabrication charges and installation charges, conveyance etc., complete.

Supply of Steel single cot of size 78" x 36" x 18"/30" ( NSTSCOT 2424R ): Made out of 18GT CR sheet, IS:513 GR, 1" 18G ERW round pipe and 7/8"18G ERW round pipe IS:3047 - 2005 with powder coat finish of single cot size 78" x 36" x 30" etc., complete complying with standard specification and as directed by the departmental officers.

Supply of Mattress 78" x 36: x 4" with one pillow and cover, bed spread ( NSTWOTH 3066 ) : Made out of 2" coir - 80 densitiy , 2" foam - 40, density with Upholstery fabric cover, good stitch with one pillow 18" x 12" and cover, bed spread etc., complete complying with standard specification and as directed by the departmental officers.

Injection Grouting : Drilling the holes, to freed of dust and insert the nozzle, Inject the pressure Grouting Anti-Termit mix material ( Anti - Terminator Liquid, IWP liquid, SBR latex, etc., ) to hole, fill in the holes with flug component.

Providing Cup-board Shutter using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

Pointing with Cement mortar 1:3 ( One cement and three crushed stone sand) for using Machine presed tiles including finishing curing properly etc., complete complying with standard specification as directed.

Dinning Table with fixed stools OVERALL SIZE: 1200 ( W ) x 850 ( D ) x 800 ( H ) mm supplying and placing dining table with four seater capacity an over all size 1200 x 850 x 800 ( H ). All materials use intable shall be stainless steel with 304 grade sheet. The under structure to be made up with SS 202 tube of 40 x 40 x 1.6mm thick. Dining table shall be supplied with folded stool for seating, supported with strong tube of sectioned 50 x 50mm thick etc., complete including transportation charges etc.,

Sub Total