SPECIAL REPAIR TO BLDG NO T 01 RESPIRATORY DEPT AND WARD AND PROVN OF ADDL ROOM AND TOILET AT ECHS POLYCLINIC AT NAMKUM AT RANCHI UNDER GE RANCHI

Amount

Dismantling AC/CGI/ translucent (corrugated, semicorrugated,etc), as in roof covering, complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section in any position complete all as specified and directed.

Dismantling timber scantling in fillet,rails,post,rafters,purlin etc under 40 sq cm in section complete all as specified and directed.

Dismantling of roof trusses, purlin, rails fastening, etc, of steel section complete all as specified and directed.

M&L roof trusses (framed ), trussed, purlins, rails & fastening and heavy bracket framing (beam, tee, angle, channel, flat, etc) incl distance pieces, cleats , holdfast etc, complete all as specified and directed.

M&L MS flat (wind tie) as roof sheet securing incl distance pieces, cleats etc, complete all as specified and directed.

M&L 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roof, walls etc fixed with L-type or J-type or cranked hook bolts etc complete all as specified and directed.

All as per Ser item No 07 above but exept sheet

M&L Asbestos cement two piece adjustable plain wing ridge 6 mm thick fixed with 'J' type hook bolts etc complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, Chhaja, etc fixed with self tapping screws, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge,etc with self tapping screws or J hooks, complete all as specified and directed.

M&L 1.4mm thick Fibre glass reinforced translucent sheeting in roof, walls etc fixed with L-type or J-type or cranked hook bolts etc, complete all as specified and directed.

Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc) of any type including cover fillets.

M&L providing aluminium snap Grid frame work for false ceiling with of size 605X605mm ,using Main and cross tee of size 36.5mmX25mmX1.4mm, weighing 0.24 kg/RM and 23.5mmX26.4mmX1.4mm weighing 0.191Kg/RM respectively. the snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mmX25mmX2mm weighing 0.36Kg/RM. The snap grid shall be fixed to ceiling supporting hangers consisting of 2mm dia MS wire/GI wire, J bolts, nuts and washers as per manufacturer's, complete all as specified and directed.

M&L 4mm thick non asbestos fibre designer cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws, complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. Exc 1.5 Sqm each, complete all as specified and directed.

All as per Ser item No 16 above but exc1.5 Sqm but n.exc. 4 Sqm.

Refixing of shutter of any description exc 1 sqm and n exc 2 sqm in same opening complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame wealded/sealed to the stiles & rails with sutable PVC sheet beading and jointed togeather with solvent cement, fix in frame, complete all as specified and directed.

M&L hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165

M&L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc, complete all as specified and directed.

S&F framed work such as grills gratings etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed, baluster walk ways, railings, framework of water tanks & similar wk conforming to Fe410-0 or Fe310-0 .

S&F in repair Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as specified and directed.

Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 125 mm long, complete all as specified and directed.

S&F Aluminium anodised handles of extruded section and fixed 125 mm long.

S&F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed.

M&L preparation of new wooden surface any description over 10 cm width or girth and applying two coat synthetic enamel paint over a coat pink primer complete all as specified and directed.

M&L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L rendering 10 mm thick in cement mortar 1:4 on chajjas/lintel etc and finished even and fair without using extra cement in patches.

M&L rendering 15 mm thick in CM 1:6 in on surface of walls and finished even and fair (without using extra cement) in patches.

M&L preparation of new plastered surfaces of walls/chajja/lintel and applying three coats of white wash, complete all as specified and directed.

M&L preparation of new plastered surfaces of walls/chajja/lintel and applying two coats of cement based paint white or tinted over a coat of alkali resistant primer, complete as specified and directed.

M&L preparation of new plastered surfaces of walls and applying two coats of oil bound distemper on walls, white or tinted over a coat of chalk whiting, complete all as specified & directed

M&L complete removal of existing surface and applying two coat of cement base paint on walls, etc white or tinted, complete all as specified and directed.

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with 2mm thick wall care putty and preparation of surfaces for further treatment and applying two coats of distemper, oil emulsion white or tinted, complete all as specified and directed.

M&L preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint),any colour, complete all as specified and directed.

Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete all as specified and directed.

M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6, complete all as specified and directed.

All as per Ser item No 42 above but except bricks

Demoliton of cement concrete in ground floor paving n exc 15cm thickness ( below or above ground level ) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc, complete all as specified and directed.

M&L Cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc complete all as specified and directed.

M&L 40 mm thick PCC type B - 1 1:2:4 using 20 mm graded stone aggregate as in flooring finish even & smooth using extra cement, complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3.

M&L non skid coloured ceramic tiles 300 x300 x7mm thick in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

M&L joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

M&L coloured ceramic glazed tiles 375x250x7mm/ 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement.

M&L 9-10mm thick Light coloured vitrified ceramic tiles of size in floors, not exceeding 0.36 sqm set & jointed in neat cement slurry and pointed in coloured cement to match over & including 20mm thick screed bed in CM 1:4 complete all as specified & directed.

All as per Item No 53 above but as in Skirting with 10mm thick rendering in CM 1:3

M&L machine cut kota stone slab flooring 18-20mm thick over & including 20mm screed base in CM 1: 4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

All as per Ser Item No 55 but as in Skirting with 10mm thick rendering in CM 1:3

M&L antifungal Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment over & including 20mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

Demolition of cement concrete reinforced as in chullah hoods , shelves, cover slab and plate form etc complete all as specified and directed

M&L RCC as in kitchen platform, shelves, cover slab type B-O 1:2:4 (12.5 mm graded aggregate) including necessary form work, complete all as specified and directed.

S&F mild steel TMT bars 8 to 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking and binding with and including mils steel wire (annealed) not less than 0.9 mm dia quality conforming to Fe-410-S or F-410-0 etc, complete all as specified and directed.

M&L marble work of any shade 16 to 18mm thick in cooking platform, steps, windowcills, etc over and incl 15mm thick cement screed base in CM 1:4 laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab incl rounding of slab & demolition of old slab where directed complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F anodised aluminium door shutters, aluminium shutters, aluminium section weighing 0.55 Kg/m including necessary joining joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, anodised alumnium snap beading, screws etc, complete all as specified and directed.

S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc, complete all as specified and directed.

M&L double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed. Make - Kelwyn / Amar

S&F cast brass fanlight pivot with plate size 25mmx65mm and suitable for shutter of 35mm thick complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples

M&L 9mm thick Prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with alumunium frame work.

S&F 4.00 mm thick plain Sheet glass, area exc 0.5 sqm in each pane and fixed to aluminium frame work etc complete all as specified and directed.

S&F 4.00 mm thick plain Sheet glass, area n exc 0.5 sqm in each pane and fixed to aluminium frame work complete all as specified and directed.

S&F 4 lever brass mortice lock vertical type size 65mm long complete all as specified and directed.

S&F in repairs IVC hand shower (Health faucet) with 8mm dia, 01 (one) metre long PVC tube and wall hook with plastic body complete all as specified & directed.

S&F in repair 1000 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I

S&F PVC ball valve 20mm dia with epoxy coateed aluminium rod and high density ball (minium weight 210 gms) complete all as specified and directed.

Taking up or steel tubing & connections including cleaning for refixing bore of pipe 15mm etc, complete all as specified and directed

All as per item No 75 above but 20mm bore

S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 15mm bore etc complete all as specified and directed

All as per item No 77 above but 20mm bore

Refixing old galvanised steel tubes & connections on wall 15 mm bore complete all as specified and directed .

All as per item No 79 above but 20mm bore

S&F in repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

S&F in repair for Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

S&F in repair PVC ball valve 20mm dia with epoxy coated aluminium rod and high density ball (minium weight 210 gms) complete all as specified and directed.

S&F in repair bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed .

S&F in repair stop valve 15mm chromium plated screw down, high pressure with crutch or butterfly handle, screwed fboth ends for or iron pipe or for unions and fixed complete all as specified and directed

All as per Ser item No 85 above but two way angle cock

S&F in repairs15mm dia pillar tap cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed

S&F in repairs 15 mm dia concealed type stop valve fancy type chromium plated etc complete all as specified and directed

S&F in repair Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan ( pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap, sheet cover of white colour, complete all as specified and directed.

S&F in repair MS conduit curtain rod with PVC coating fancy type drafry rod 20mm dia of any colour as approved design and fixed to wall, complete all as specified and directed.

S&F fancy type sofia brakcet for the curtain rod (suitable for 20mm dia curtain rod) of any approved colour and design, complete all as specified and directed.

S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand including dismantling

S&F in repair viterous china urinal half stall type with waste pipe and fittings, complete all as specified and directed.

S&F in repair PVC connection 450mm long with two PTMT nuts (Prayag)

S&F in repair CP brass towel rail, 20mm dia, D type,60cm long complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity including bracket fixed to wall & flush pipe complete all as specified and directed. Make-Parryware-slimline/ Commander-water bird

S&F in repair, plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device for pedestal pattern WC white colour.

S&F in repair 32mm bore waste coupling of PTMT (half or full threaded) (Min wt 45 gms) complete all as specified and directed.

S&F in repair 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6kgf/sqcm complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint laid in trenches complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joint laid in trenches complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed.

M&L 100mm dia Cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4)

S&F PVC (SWR) Gully trap 125/100 mm setting and jionting with solvent cemeny

M&L bed to drain pipe including packing concrete under and hunching against the sides of pipes after they are laid and tested in PCC 1:4:8 type D-2, complete all as specified and directed.

S&F PVC(SWR) 110 mm bends any radius.

S&F PVC (SWR) vent cowl 110mm bore

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Surface exavation n.exc 30cm deep and averaging 15cm deep and getting out in sooft/lose soil all as specified and directed

Material & labour for hardcore of broken stone or boulders of gauge n.exc. 63mm, deposited,spread and leveled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thich PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed

M&L Cement concrete 1:2:4 type B0 using 12.5mm graded agg 25 mm thick for laying of floor etc complete all as specified and directed

Material & labour Non skid coloured Joint free tiles 7-8 mm thick ( square/ rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm,as in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed.

M&L coloured ceramic glazed tiles 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement.

M&L for 9-10mm thick Light coloured vitrified ceramic tiles of size in floors, not exceeding 0.36 sqm set & jointed in neat cement slurry and pointed in coloured cement to match over & including 20mm thick screed bed in CM 1:4 complete all as specified & directed.

All as per Item No 119 above but as in Skirting with 10mm thick rendering in CM 1:3, complete all as specified and directed.

M&L providing aluminum snap Grid frame work for false ceiling with of size 595x595 mm, using main and cross Tee of size 36.5 mm x 25mm x 1.4 mm, weighing 0.24 Kg/RM and 23.5mm x 26.4mm x 1.4mm weighing 0.191 Kg/RM respectively. The snap grid shall be supported at end all along the wall with alu anodized angle of size 40 mm x 25 mm x 2 mm weighing 0.36 Kg/RM . the snap grid shall be fixed to ceiling supporting hangers consisting of 2 mm dia MS wire, J bolts, nuts and washers as per manufacturer's instructrions. Note : If any aluminum section found of less weight, the same ahall be worked out by actual weight and recovery @ Rs. 230/- Kg shall be made from contractors dues.

M&L 4mm thick Non asbestos fibre designer cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws, complete all as specified and directed.

Material & labour for brick work with sub class ‘B’ bricks, straight or curved on plan, exc. 6 metre mean radius built in CM(1:4) as in half brick wall complete all as specified and directed.

Use & waste of form work to edges of concrete flats, n.exc. 20 cm wide, horizontal or sloping and similar works, complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200mm thick (horizontal or slopping).

Material & labour for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in beams, lintel, lintel band etc complete all as specified and directed.

M&L RCC Type A1 1:1/2:3 (20mm graded aggregate) nominal mix over slabs supported on walls, beams and columns in floor, roofs, landing, balconies canopies, deck slabs and in shelves and the like

Supply & fix mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply & fix mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending as in stirups complete all as specified and directed.

Supply & fix mild steel work as in hold fast etc and similar articles confirming Fe-290 Gde E-165 complete all as specified & directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc., to store and rubbish not exc. 50m

M&L Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.including (powder coating 50 Micron) complete all as specified and directed.

M&L Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.including (powder coating not less than 50 micron) complete all as specified and directed.

M&L Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc .including (powder coating not less than 50 micron) complete all as specified and directed.

Supply & fix 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane

S&F factory made single extruded WPC (Wood polymer composite) solid door/window/ceosetory windows & other frames/chowkhats of size 50 x 100 mm comprising of virgin PVC ploymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerence in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made solid PVC Moulded door shutter(with particle board core), 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing .

Supply & fix 3mm thick sheet glass, frosted type ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane

Supply & fix mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-410-0 or Fe-310-0.

M&L PCC 1:3:6 type C1 using 20 mm grade stone aggregate as in hold fast etc

Supply & fix mild steel butt hinges 100mm size medium weight, cold rolled complete all as specified and directed.

Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified and directed.

Supply & fix 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

Supply & fix 250 mm long Aluminium alloy, Sliding door bolts, with hasp, staple and fixing clips of sheet, cast or extruded section and fixing bolts of extruded section or cast aluminium alloy complete all as specified & directed.

Material & labour for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Materials & labour for prepration of newely plastered surface and finishing the surfaces of wall with wall putty and applying two coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed.

Preparation of newly plaster surface of wall and applying two coats of cement base paint over one coat of cement primer complete all as specified and directed.

Supplied and fixed vitreous china WHB white flat back size 550x400mm including Supplied and fixed angle iron brackets, CP waste coupling, complete all as specified & directed.

Supply & fix in PVC low level flushing cistern of 9-10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed.

Supply and laying of 16mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supply and laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supply & fix bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed.

Supply & fix stop cock fancy type chromium plated with long shank and cup concealed type for 15mm bore steel pipe complete all as specified and directed.

Supply and fixed angular stop valve (concealed type) , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.

Supply & fix pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed.

S&F Soap dish, vitreous china white, approximate size 160x160x90mm.

S&F grating doom 100mm dia of PTMT (Minimum weight 25gms).

Supply and fixing PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

Supply & fix in PVC connections of 450mm long of PRYAG Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply & fixing MS tubular towel rail, 60 cm long, 20mm bore, chromium plated complete all as specified & directed.

Supply and fix sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromiun plated bracket guard and railing 60 cm long

Supply & fix rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings complete all as specified & directed.

Supply & fix PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed.

Supply & fix 110 mm bore PVC (SWR) pipe in any length fixed to walls with clamps and laid in floors etc. complete all as specified and directed.

Supply & fix PVC bends any radius suitable for 110 mm thick PVC pipes complete all as specified and directed.

Supply & fix 75 mm bore PVC (SWR) pipe in any length fixed to walls with clamps and laid in floors etc. complete all as specified and directed.

Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed.

Material & labour for 100mm dia cast iron Nahani traps with grating including jointing with waste pipe fixed in cement concrete type B1 (1:2:4).

Material & labour for 75mm bore PVC floor traps plain with grating including jointing with solvent cement complete all as specified & directed.

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed.

Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed.

Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed.

M & L PCC 1:3:6 type C-2 as Concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested; in

Supply & fix 150mm dia salt glazed stone ware (SGSW) drain pipes laid in trenches and jointed in CM 1:1 including testing complete all as specified and directed.

Material & labour for pre-cast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in cover slabs, set in CM 1:6 including necessary form work and finishing to exposed surfaces complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2(40mm graded aggregate) as in plinth protection, path etc finished the surface even & fair complete all as specified and directed.

P.C.C 1:3:6 Type C-1 as in bed blocks, benching, copings and like complete all as specified and ditected

S&F MS framed work of any section FE 410-w (Gde- E-250) quality as directed by Engr-in-charge as in truss/ purlins etc incl cleats, brackets complete al as spfd and directed

Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down copper/aluminum point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, pendents, regulators, sockets, light fittings, wooden boards, bell push, call bell, regulators etc (credit scheduled for above items should be made as per condition separately) and making good to disturbed wall and surface complete all as specified and directed.

M&L Point wiring using approved colour coding as per IS ( Red, black and green for single phase circuit ), with 1.5 Sq mm cross sectional area, single core, multi stranded copper conductor (FRLS) PVC insulated and sheathed electrical cable ISI Marked and including medium grade PVC conduit of dia not less than 20 mm and conduit accessories concealed in wall/surface including mild steel/pressed steel sunkun boxes (with earth dolly) dully painted with two coats of black bituminous paint over a coat of red oxide primer externally, covered with modular sheet for fixing of modular switches, socktes etc including PVC insulated multi-stranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engr in Charge at site for the following:- Note - (i) Cost of cutting chassing and making good of disturbed surface all to match with existing surface deemed to quoted rates.(ii) Switch ,socket and regulator to be measured and paid separately in respective items. (iii) The modular metal box and modular cover plate in suitable size for mounting of switch, socket and fan regulators to be provide and rates deemed to be includes in items rate.

Light point controlled by one piano type 5 amp switch complete all as specified and directed.

One 3 pin socket outlet, 5 Amps independent board complete all as specified & as directed. (Switch, socket shall be measured separately).

One socket outlet 3 pin 5 Amps on the same board controlled by separate switch. (Switch, socket shall be measured separately).

One fan (Ceiling/Exhaust/Wall) point controlled by on paino type 5 amp switch and fan regulator, complete all as specified and directed.

All as per item No.184 here-in-before but with 2.50 Sq mm un-sheathed multistranded cable for one socket outlet 15 Amps independent including continuous copper earth wire, PVC insulated of 2.50 Sq mm size (Switch, Socket shall be measured and paid separately).

All as per Ser item No 184.00 above here-in-before but with 4.00 Sq mm un-sheathed multistranded cable for one socket outlet 15 Amps independent including continuous copper earth wire, PVC insulated of 4 Sq mm size, complete all as specified and directed.

M&L switch Modular switch 1 way 10A,1 module 240 volts complete all as specified and directed.

M&L switch Modular switch 1 way 15A,1 module 240 volts complete all as specified and directed.

M&L socket outlet Socket, 6A - 2/3 pin combined 2 module 240 volts complete all as specified and directed.

M&L socket outlet Socket, 6/16A - 2/3 pin combined 2 module 240 volts complete all as specified and directed.

M&L Fan step regulator, 120W - 2 module 240 volts, complete all as specified and directed.

M&L ceiling rose surface bakelite 65 x50mm, 3 terminal, complete all as specified directed.

Supply and fixing LED Bed light of 3 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. Make: Phillips/Syska/Jaquar

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm (2ftx2ft), 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20 W (4ft), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Doismantling and Taking down sub main wiring including batten /Conduit and making good to distrubed surface, complete all as specified and directed.

M&L concealed sub main wiring with 2 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 25 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated,one run of unsheathed copper conductor stranded 1100 volt grade cable of size 6 sqmm (FRLS) cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green.Note - 02 Nos Run single core for Phase and nuetral and 01 No Run for Earth wire are drown through in PVC rigid conduit medium grade to be measured as 1 Running meter sub main wiring .

Dismantling and Taking down old unserviceable existing cable any type any size complete all as specified and directed.

M&L XLPE insulated heavy duty electric cable of size 35 Sqmm 3.5 Core with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheather laying in trenches/cable ducts, fixed to wall/pole and including taking down old unserviceable cable complete all as specified and directed of following sizes Note:- (i) Excavation & earth work, sand, new bricks for cable protection shall be measured & paid seperatly in respective items here- in- after.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable, foundation etc, and getting out in soft /loose soil complete all as specified and directed.

Returning filling in including spreading, leveling Watering and well ramming in layers not exceeding 25cm, complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed.

M&L Spreading ribbed soil in trenches as in cable cushioning all as per IS 1255-1983 and as directed. Note :- Excavated approved soil shall be ribbed by using sieve to separate composite particles etc as per IS and refiiling in trenches before laying of cable 8 CM and 15 CM after laying of cable. This is than gently punned down to a depth of 10 cm above the top of upper most cable (ii) For the purpose of measurement only punned thickness only will be considered for paymet.

M&L laying bricks 'B' class over a cable (Width wise) old liad dried, complete all as specified and directed.

Material and labour for cutting of metallic road/ hard standing/hard rock/wall up to a size not exceeding 20cm width and not exceeding 60cm in depth for laying of protection pipe for cable including making good the disturbed road/hard standing by providing PCC (1:2:4) type B1, 40 mm grade crushed stone aggregate upto existing surface level or removing the any type of tiles carefully and refixing properly as per existing surface including suitable size of GI pipe (if necessary) complete all as specified and as directed. Note: (1). If damaged/broken the any type of tiles while removing, the contractor shall replace the broken tiles with new one.(2). The Quoted rate is included for all materials/T&P/Machinery used in this item, no material can paid/measured separately.(3). All the removable tiles/re fixable material shall kept carefully at a safe place for refixing with in this quoted rate.(4). GI Pipe shall measured and paid separately under relevant item.

M&L GI tubing medium grade of size 40 mm dia fixed on walls / laid in trenches as protection pipe for under ground cable including provisioning of specials and clamps etc including taking down of old unseviceable pipe any type and any size complete all as speified and directed. Note: Excavation/PCC cutting to be paid separately in respective items.

Dismantling and Taking down old unserviceable main switch/DBs/MCB DBs with MCB including making good the disturbed surface complete all as specified and directed.

M&L sheet metal enclosure MCB DB, SPN, 240 volts, 12 way, double door type grouting in wall in CM, making good of disturbed surfaces and matching with existing and electrical connections complete all as specified and directed.

S&F MCB SPN 240 volts, 10 KA, C-Series 32 Amp, complete all as specified and directed.

S&F MCB SPN 240 volts, 10 KA, C-Series 40 to 63 Amp, complete all as specified and directed.

S&F MCB SP 240 volts, 10 KA, C-Series 6 to 32 Amps, complete all as specified and directed.

M&L VTPN distribution board, 415 volts , 50 Hz, 06 way with 200 Amps rated bus bar, vertical double door type,IP 43, complete all as specified and directed.

S&F MCCB 63 Amp 16KA three pole 415 Volts, 50 Hz with thermal magnetic release, fixed type, complete all as specified & as directed.

Taking down of existing ceiling fan from any height, opening and dismantling for greasing and painting of fans complete with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust writing MES No with black paint etc and hanging of fans at same location including clamp with nut/bolt and rubber bush of any make connecting up including provision of cable from ceiling rose to fan complete all as specified and directed.

M&L providing earthing complete with GI earth plate electrode of size 60 cm X 60 cm X 6 mm thick burried directly in ground, earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level, connected to 25x4 mm GI strip by means of bolts, nuts check nuts and washer of GI or steel all as shown in electrical plate No.5 of SSR Pt-I, connected to earthing main switch board/main board including necessary earthwork PCC 1:3:6 type C-1 chamber, precast RCC cover using XPM weighing not less than 4.00 Kg/Sq m in lieu of CI cover, 20 mm bore GI pipe (light grade) for watering and 32 mm bore GI pipe (light grade) for protection of earth lead etc. complete all as specified and directed.

M&L switch piano flush type 6 Amps 240 volts single pole one way complete all as specified and directed.

M&L for socket outlet 2 in 1 , 5 pin, 6 Amps 240 volts complete all as specified and directed.

M&L for switch piano flush type 16 Amps, 240 volts one way.

M&L for Socket flush type 6/16 Amps, 2 in 1, 240 volts complete all as specified

M&L for ceiling rose surface bakelite, 3 terminal complete all as specified & as directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd bcomplete all as specified

M&L for sheet metal enclosure MCB DB, SPN, 240 volts, 8 way, double door type grouting in wall in CM, making good of disturbed surfaces and matching with existing and electrical connections complete.

Supply and fixing MCB SPN, 240 volts AC 50 Hz, 32 Amps all as directed.

M&L for concealed sub main wiring with 2 single core PVC insulated, unsheathed copper conductor stranded 1100 volt grade cable of size 4 sqmm (FRLS) drawn in and incl PVC rigid conduit medium grade of size not less than 25 mm dia ISI marked ivory white with all accessories such as tee, bend, joint cover etc PVC insulated,one run of unsheathed copper conductor stranded 1100 volt grade cable of size 4 sqmm (FRLS) cable as continuous earth lead complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete as specified and as directed

Supply and fixing LED lights fitting 1x 20 W (4'), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz RPM 1200, Copper winding of sweep 250mm and making hole for fixing of exhaust fan in suitable size.

MS Sri Mahadeo Enterprises

M/S ANAND MOHAN ENTERPRISES

M K Enterprises

M/S Manoj Kumar Sinha

M.H CONSTRUCTION

BUILDCON ENTERPRISES

J K CONSTRUCTION